Works with Panasonic HDC-SD200 video camera with attached conf file. May work also with other Panasonic video cameras. I tested only 'capture_still' for still image capturing; 'start/stop' for video recording and 'power' for toggling stand-by. Range was about 3 meters.

.................
# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.8.4a(default) on Sat May 15 20:21:57 2010
#
# contributed by
#
# brand: Panasonic N2QAEC000024
# model no. of remote control: N2QAEC000024
# devices being controlled by this remote: Panasonic HDC-SD200
#

begin remote

name N2QAEC000024
bits 24
flags SPACE_ENC
eps 30
aeps 100

header 3468 1731
one 446 1269
zero 446 424
ptrail 447
pre_data_bits 24
pre_data 0x40040E
gap 74451
toggle_bit_mask 0x0

begin codes
capture_still 0x14667C
T/+ 0x14465C
W/- 0x14C6DC
start/stop 0x143329
power 0x143C26
ext_display 0x14EAF0
date/time 0x14E6FC
search_back 0x14405A
play 0x14504A
search_forw 0x14C0DA
still_adv_back 0x14E0FA
pause 0x14607A
still_adv_forw 0x14F0EA
skip_back 0x149288
stop 0x14001A
skip_forw 0x145248
delete 0x140E14
menu 0x146A70
up 0x940B91
left 0x94CB51
right 0x944BD1
down 0x948B11
ok 0x141A00
end codes

end remote