Hello, You sure? I have it here and the only thing that differs is that I'm using LPR 1.2. Anyway, just pushed Headset Control 0.2 to Extras-devel. [Insert standard, usual Extras-devel warning] By default - when pressing the button - it tells MAFW to pause/play the track. If you set the GConf key /apps/headset-control/next-mode to true, a press will result in it skipping to the next track in whatever state the Media Player is currently in (Paused/Stopped/Playing etc.) Implementing a "if button held" functionality would've been nice, but the only time a signal gets emitted is when the button is depressed. A "delay between presses" functionality would've also been nice, but it seems the nokia-av module enforces a mandatory delay before you can press the button again. It's too long, IMO, for any sort of delay in the program for sending different commands. Also, because the ability for a signal to be emitted when pressing the signal was intermittent, Headset Control will force the button to be enabled (if a Nokia headset is plugged in, of course) on startup and 5 seconds after a call is ended. (Code snippet here: http://slexy.org/view/s21Wl6YqxI) Best regards.
[ 3669.544677] wlan0: no IPv6 routers present [ 4989.052886] headphone (GPIO 177) is now connected [ 4990.585937] input: headset button as /class/input/input4 [ 4990.896972] kb_lock (GPIO 113) is now closed [ 4991.083923] kb_lock (GPIO 113) is now open [ 4992.263610] slide (GPIO 71) is now open [ 5003.388519] slide (GPIO 71) is now closed [ 5076.966796] headphone (GPIO 177) is now disconnected [ 5084.677673] headphone (GPIO 177) is now connected [ 5085.795196] input: headset button as /class/input/input5 MohammadAG-N900:~#