I have updated my overclocking guide with the link also. Now to use this, copy the text inside the txt file to the N900 clipboard (can open the file via leafpad etc), then create a new beecon widget, go to settings window, then click Advanced on right, click yes,then go down to the bottom, then click paste in top center, then click import on the right side, click yes. then go out. you will now have imported my exact beecon settings. Please do note that the 1Ghz widget is using a custom profile. To get it to work, you will need to run the following from xterminal first and create the modified ideal profile that is clocked up to 1Ghz. (example is using ideal voltage profile) 1. Launch xterminal 2. kernel-config load ideal 3. kernel-config limits 500 1000 4. kernel-config save ideal_1000