maemo.org - Talk - View Single Post - Updating using flasher

DrWilken	2010-05-25 , 19:18
Posts: 515 \| Thanked: 266 times \| Joined on Nov 2009 @ Oelsted, Denmark	#21

Originally Posted by HellFlyer

I still dont get it. Wiki warns that after flashing fiasco do not turn on the device but if the cable is connected and it reboots automatically what i need to do to get eMMC installed as well?

when to add -R ?

You did exactly what You're NOT supposed to do...

When flashing the "fiasco" image remove -R, then later when flashing the eMMC (if You want to do that - again READ! - It will remove everything from "MyDocs"), do as described (don't remove the -R this time).

-R means reboot and when flashing with both images You don't want a reboot after the first flash but only after the second flash. It's all right there in the instructions...

Linux example:

Code:

sudo flasher-3.5 -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin -f
sudo flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -

Windows example:

Code:

flasher-3.5.exe -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin -f
flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -

__________________
Christian Wilken - tux-POWER.dk!
... May the Source be with You ...

Last edited by DrWilken; 2010-05-25 at 19:22.

Quote & Reply |

The Following User Says Thank You to DrWilken For This Useful Post:
HellFlyer