Thread: cold flashing, really a mission impossible?
View Single Post
u2maemo is offline u2maemo
2010-05-31 , 23:44
Posts: 71 | Thanked: 19 times | Joined on Dec 2009
#3
Now I am testing by using /dev/ttyUSB0

Code:
flasher-3.5 -c -S /dev/ttyUSB0 -h RX-44:0805 -F RX-44_DIABLO_5.2008.43-7_PR_COMBINED_MR0_ARM.bin -f -R
flasher v2.5.2 (Oct 21 2009)

SW version in image: RX-44_DIABLO_5.2008.43-7_PR_MR0
Image 'kernel', size 1500 kB
	Version 2.6.21-200842maemo1
Image 'initfs', size 2273 kB
	Version 0.95.22-200842maemo1w38b3
Image 'rootfs', size 122496 kB
	Version RX-34+RX-44+RX-48_DIABLO_5.2008.43-7_PR_MR0
Image '2nd', size 8192 bytes
	Valid for RX-44: 0808
	Version 1.1.16-200844maemo2
Image 'xloader', size 9216 bytes
	Valid for RX-44: 0808
	Version 1.1.16-200844maemo2
Image 'secondary', size 100736 bytes
	Valid for RX-44: 0808
	Version 1.1.16-200844maemo2
Image '2nd', size 8192 bytes
	Valid for RX-44: 0801, 0802, 0803, 0804, 0805, 0806, 0901, 0902
	Version 1.1.16-200844maemo2
Image 'xloader', size 9216 bytes
	Valid for RX-44: 0801, 0802, 0803, 0804, 0805, 0806, 0901, 0902
	Version 1.1.16-200844maemo2
Image 'secondary', size 100736 bytes
	Valid for RX-44: 0801, 0802, 0803, 0804, 0805, 0806, 0901, 0902
	Version 1.1.16-200844maemo2
Using serial port /dev/ttyUSB0
Waiting for ASIC id...
it stop at "Waiting for ASIC id..."