View Single Post
HeavyComponent's Avatar
Posts: 120 | Thanked: 14 times | Joined on Jun 2010 @ Queens, NY
#10
With SD card NOT inserted...

Code:
[ 3.098937] Disabling unused clock "ssi_ick"
[ 3.098968] Disabling unused clock "gpt10_ick"
[ 3.098999] Disabling unused clock "gpt11_ick"
[ 3.099029] Disabling unused clock "uart1_ick"
[ 3.099090] Disabling unused clock "uart2_ick"
[ 3.099121] Disabling unused clock "usbtll_ick"
[ 3.099151] Disabling unused clock "ssi_ssr_fck"
[ 3.099212] Disabling unused clock "uart1_fck"
[ 3.099243] Disabling unused clock "uart2_fck"
[ 3.099273] Disabling unused clock "usbtll_fck"
[ 3.099334] Disabling unused clock "ts_fck"
[ 3.099365] Disabling unused clock "cpefuse_fck"
[ 3.099426] Disabling unused clock "gpt11_fck"
[ 3.099456] Disabling unused clock "gpt10_fck"
[ 3.099487] Disabling unused clock "dpll5_ck"
[ 3.099548] Disabling unused clock "dpll4_m6x2_ck"
[ 3.099609] Disabling unused clock "dpll4_m5x2_ck"
[ 3.099639] Disabling unused clock "dpll3_m3x2_ck"
[ 3.099670] Disabling unused clock "sys_clkout1"
[ 3.100128] Bootup reason: pwr_key
[ 3.100219] OMAP GPIO switch handler initializing
[ 3.102874] slide (GPIO 71) is now closed
[ 3.102935] proximity (GPIO 89) is now open
[ 3.102966] kb_lock (GPIO 113) is now open
[ 3.102996] headphone (GPIO 177) is now disconnected
[ 3.103027] cam_shutter (GPIO 110) is now closed
[ 3.103057] cam_launch (GPIO 69) is now inactive
[ 3.103088] cam_focus (GPIO 68) is now inactive
[ 3.103118] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 3.123504] omapfb: acx565akm rev 8d LCD detected
[ 3.157989] tpa6130a2 2-0060: Headphone amplifier initialized successfully
[ 3.178680] UBIFS: recovery needed
[ 3.666107] UBIFS: recovery completed
[ 3.666168] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 3.666229] UBIFS: file system size: 254564352 bytes (248598 KiB, 242 MiB, 1973 LEBs)
[ 3.666259] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 3.666320] UBIFS: media format: 4 (latest is 4)
[ 3.666351] UBIFS: default compressor: lzo
[ 3.666381] UBIFS: reserved for root: 4384586 bytes (4281 KiB)
[ 3.666778] VFS: Mounted root (ubifs filesystem).
[ 3.666992] Freeing init memory: 144K
[ 5.290100] Registered led device: twl4030:vibrator
[ 5.569091] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
[ 5.766693] tsl2563 2-0029: model 7, rev. 0
[ 5.891754] lp5523 2-0032: LP5523 Programmable led chip found
[ 6.088317] Linux video capture interface: v2.00
[ 6.119110] I2C driver for Si4713 FM Radio Transmitter
[ 6.880249] Bluetooth: Core ver 2.15
[ 6.888977] i2c_omap i2c_omap.2: controller timed out
[ 6.898986] NET: Registered protocol family 31
[ 6.899017] Bluetooth: HCI device and connection manager initialized
[ 6.899078] Bluetooth: HCI socket layer initialized
[ 6.945739] lp5523 2-0032: got interrupt from led chip
[ 6.946319] lp5523 2-0032: interrupt from led chip 4f
[ 6.946350] lp5523 2-0032: all engines configured
[ 6.946380] lp5523 2-0032: disabling engines
[ 6.946990] Registered led device: lp5523:kb1
[ 6.947143] Registered led device: lp5523:kb2
[ 6.947265] Registered led device: lp5523:kb3
[ 6.947418] Registered led device: lp5523:kb4
[ 6.947540] Registered led device: lp5523:b
[ 6.947662] Registered led device: lp5523:g
[ 6.947784] Registered led device: lp5523:r
[ 6.947937] Registered led device: lp5523:kb5
[ 6.948059] Registered led device: lp5523:kb6
[ 6.990203] hci_h4p hci_h4p: Registering HCI H4P device
[ 7.030883] radio-si4713 2-0063: Detected Si4713 (0x0d) Firmware: 3.0 Patch ID: 00:00 Component: 3.0 Chip Rev.: unknown
[ 7.149322] nokia-av nokia-av: accessory detect module initialized
[ 7.156707] TSC2005 driver initializing
[ 7.157379] input: TSC2005 touchscreen as /class/input/input3
[ 7.214141] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock
[ 7.334747] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock
[ 7.664398] omap_wdt omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec, nowayout is on
[ 7.685455] SSI DRIVER Version 1.1-rc2
[ 7.686218] omap_ssi omap_ssi: SSI Hardware REVISION 1.0
[ 7.756164] phy0: Selected rate control algorithm 'minstrel'
[ 7.811004] mmc1: new high speed MMC card at address 0001
[ 7.813018] smc91x: not found (-19).
[ 7.818267] mmcblk0: mmc1:0001 MMC32G 29.8 GiB 
[ 7.818695] mmcblk0: p1 p2 p3
[ 7.846923] wl1251: loaded
[ 7.847625] wl1251: initialized
[ 8.227539] CMT speech driver v0.2.0
[ 8.355377] NET: Registered protocol family 35
[ 8.422271] SSI McSAAB PROTOCOL Version: 2.0-rc1
[ 8.687438] dspbridge_init: 412800 bytes @ 80600000
[ 8.809112] omap-iommu omap-iommu.1: isp registered
[ 9.013305] omap-iommu omap-iommu.1: isp: version 1.1
[ 9.188262] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin
[ 9.221282] smia_reglist_import: meta_reglist version 2009-07-27
[ 9.221374] smia_reglist_import: type 10 w 648 h 488fmt 30314142 ival 100/1502 ptr d0ccc2a0
[ 9.221374] smia_reglist_import: type 10 w 648 h 488fmt 30314142 ival 100/3003 ptr d0ccc228
[ 9.221405] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0ccc090
[ 9.221435] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0ccc038
[ 9.234130] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin
[ 9.257568] smia_reglist_import: meta_reglist version V14 03-June-2008
[ 9.257659] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0ccf1f4
[ 9.257690] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0ccf454
[ 9.257720] smia_reglist_import: type 10 w 1296 h 984fmt 30314142 ival 100/501 ptr d0ccf57c
[ 9.257720] smia_reglist_import: type 10 w 1296 h 984fmt 30314442 ival 100/2500 ptr d0ccf614
[ 9.257751] smia_reglist_import: type 10 w 1296 h 984fmt 30314442 ival 100/3000 ptr d0ccf28c
[ 9.257781] smia_reglist_import: type 10 w 864 h 656fmt 30314142 ival 100/2988 ptr d0ccf324
[ 9.257781] smia_reglist_import: type 10 w 648 h 492fmt 30314142 ival 100/499 ptr d0ccf4e4
[ 9.257812] smia_reglist_import: type 10 w 648 h 492fmt 30314142 ival 100/2993 ptr d0ccf3bc
[ 9.257812] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0ccf04c
[ 10.215026] NET: Registered protocol family 10
[ 10.215698] lo: Disabled Privacy Extensions
[ 10.216217] ADDRCONF(NETDEV_UP): phonet0: link is not ready
[ 10.248321] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007
[ 10.248382] g_file_storage gadget: Number of LUNs=2 Number of buffers=16
[ 10.248443] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 10.249053] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[ 10.249542] usb usb1: configuration #1 chosen from 1 choice
[ 10.249786] hub 1-0:1.0: USB hub found
[ 10.249877] hub 1-0:1.0: 1 port detected
[ 12.729278] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k
[ 13.041076] proximity (GPIO 89) is now closed
[ 13.834350] proximity (GPIO 89) is now open
[ 15.932952] kjournald starting. Commit interval 1 seconds
[ 15.948181] EXT3 FS on mmcblk0p2, internal journal
[ 15.948211] EXT3-fs: recovery complete.
[ 15.952392] EXT3-fs: mounted filesystem with writeback data mode.
[ 18.148101] McSAAB: ACWAKE DOWN
[ 18.148162] McSAAB: ACWAKE UP
[ 18.148193] McSAAB: WAKELINES TEST OK
[ 18.148590] ADDRCONF(NETDEV_CHANGE): phonet0: link becomes ready
[ 18.277282] Bluetooth: L2CAP ver 2.13
[ 18.277313] Bluetooth: L2CAP socket layer initialized
[ 18.387237] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.387268] Bluetooth: SCO socket layer initialized
[ 18.395080] hci_h4p hci_h4p: firmware: requesting bcmfw.bin
[ 19.068756] Bluetooth: RFCOMM socket layer initialized
[ 19.068817] Bluetooth: RFCOMM TTY layer initialized
[ 19.068847] Bluetooth: RFCOMM ver 1.11
[ 22.325073] misc iphb: Module registered in 2.6.28.10power37, built May 26 2010 00:25:25
[ 53.101409] cfg80211: Regulatory domain changed to country: US
[ 53.101440] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 53.101440] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 53.101470] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 53.101470] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 53.101501] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 53.101501] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 53.101531] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 55.906250] SCSI subsystem initialized
[ 55.994873] gprs0: attached
[ 56.268035] Driver 'sd' needs updating - please use bus_type methods
[ 74.482788] slide (GPIO 71) is now open
In the list I've seen this at the end...

Driver 'sd' needs updating - please use bus_type methods

How do I get it updated?

Thanks

EDIT: Took off the long post sorry!
__________________
Device: Nokia N900
Theme: MaemoItalia Graffiti Theme

---
Who but me?!
--HeavyC.

Last edited by HeavyComponent; 2010-06-28 at 00:01.