OK, I understand. I should have warned you that this is a raw value

I have one problem, though. There are two possible temperature values and both do not seem quite correct:

• temp1_input ("17" on my N900 -> way too low)
• temp1_input_raw ("44" on my N900 -> a bit too high, but seems OK)

I chose to display the raw value as this value could possibly be a real CPU temperature in Celsius. But I guess you are right that this should not be the *actual* temperature which is why I did not put a unit behind the value in the UI.

If anyone could provide a formula how to calculate the real temperature from temp1_input or temp1_input_raw I would be happy to implement the requested feature.