i need help with this:

[CODE] sfdisk -uM /dev/mmcblk1 << EOF
> ,6100,C
> ,,L
> ,,
> ,,
> EOF
Checking that no-one is using this disk right now ...
OK

Disk /dev/mmcblk1: 243200 cylinders, 4 heads, 16 sectors/track
Old situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End MiB #blocks Id System
/dev/mmcblk1p1 0+ 7599 7600- 7782392 b W95 FAT32
/dev/mmcblk1p2 0 - 0 0 0 Empty
/dev/mmcblk1p3 0 - 0 0 0 Empty
/dev/mmcblk1p4 0 - 0 0 0 Empty
New situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End MiB #blocks Id System
/dev/mmcblk1p1 0+ 6099 6100- 6246399+ c W95 FAT32 (LBA)
/dev/mmcblk1p2 6100 7599 1500 1536000 83 Linux
/dev/mmcblk1p3 0 - 0 0 0 Empty
/dev/mmcblk1p4 0 - 0 0 0 Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table

Re-reading the partition table ...
BLKRRPART: Device or resource busy
The command to re-read the partition table failed
Reboot your system now, before using mkfs

If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)[CODE/]