I actually picked on up today... It is not bad sometimes quick sometimes laggy... resistive screen (very resistive at times...). As stated earlier there are some really weird things with this install. The best part is the web browser which works nicely... I can not get any marketplace apps to actually download they just hang. The device seems to be in roam mode with E (edge I assume -- with no signal bars) but the r has full bars and the service is labeled El Telco Loco... There are some development icons but I do not know what is normal for Android -- the live wallpapers work. When I went to install the microsd it fell into the case as the slot is not lined up correctly.... So upon opening it up the battery is 2100 mAH 8.4v GB/T18287-2000 and it has an Atheros ROCm AR6102G-BM20 or close the printing was very small. Fun to play with a bit but no volume buttons just home, search, back, menu. I can get into the recovery mode but can not select anything.... The battery is connected / soldered right to the board (2 wires but no connector). 4 screws at the corners and many (now broken) tabs around the edges. Model number is NBA7800ATP in case that means anything. hope this is helpful. If anyone has questions let me know and I will try to answer them... This seems like a partial install of Android as the menus did not really match a friends Incredible (maybe it should not I do not know). wowsher