View Single Post
Posts: 540 | Thanked: 288 times | Joined on Sep 2009
#223
Originally Posted by jd4200 View Post
Any one been able to get this working with Linux? (Arch Linux to be specific, and the wicd network manager).
Don't know if anyone has tested that specific combination, but the issue may be elsewhere.

Originally Posted by jd4200 View Post
I've tried now and again over the last few months, with many re-installs and flashes in between, but it never seems to get an IP address, I've tried with encryption disabled and enabled.

If I set a manual IP in my netbooks network settings, it connects for 5 seconds and the disconnects right away.
(IP: 10.39.200.10, netmask: 255.255.255.0, gateway: 10.39.200.1).
All of which seem vaild considering the backend output below:
"connects" and "disconnects" as in network manager showing connection state as connected/disconnected ?

Can you ping the N900 when you have manual IP set, can you use the arp command to resolve the HW address for the gateway IP. What if you run dhclient manually ?
__________________
  • Live near Helsinki, Finland & interested in electronics ? Check this out.
  • Want anti-virus/firewall ? Read this (and follow the links, also: use the search, there are way too many threads asking the same questions over and over and over again).
  • I'm experimenting with BitCoins, if you want to tip me send some to: 1CAEy7PYptSasN67TiMYM74ELDVGZS6cCB