...I took apart an old digital camera of my brother and examined the mini-B port found inside. It was perfect for the task since the pins are in correct order and 4. is not connected to 5. With some careful soldering I got the port in place. Also I carefully made the hole bigger in the dimension the port was "taller". **IMG** Basically the new port is a little bit big (if it begins to annoy I will cut the extra part off) but it works really well. I donīt need a special cable anymore and everything just works. Since the warranty did not apply to the self-caused port-problems and the repairs could have been expensive, this was the best solution I found. **IMG** Itīs alive! Buahahahaa!