Hi, I downloaded the current (as of 20 October 2010) version of Swappolube with GUI. After using it for a while, I noticed that my N900 would not go to "complete idle" anymore: Batterygraph showed retrospectively CPU activity of around perhaps 10-15%, even when the device had been in offline mode and with the display turned off. Before installing swappolube Batterygraph showed only neglible CPU activity when the device was in the same state, such as during night time. To counter this I chose "Delete Tunings" from Swappolube and rebooted. After that Swappolube showed correctly the out-of-the-box settings for all the modifiable variables as the "Current" set up. However, the problem still persisted and the "idle" state constantly produced CPU use of around 10-15%. I then uninstalled Swappolube, but this had no effect. Could someone elaborate/speculate what might cause this increase in CPU activity? I cannot use for example Conky to determine this, since that requires both Conky and the N900 GUI to be active. In addition - and more importantly at this stage - could you please provide guidance on which files to manually remove/edit to undo all the modifications Swappolube has introduced to the system? Please feel free to ask if you need any further information. Thank you.