Thread: Problem when flashing N900 emmc
View Single Post
James_Littler's Avatar
James_Littler is offline James_Littler
2010-11-12 , 16:43
Posts: 820 | Thanked: 436 times | Joined on May 2010 @ Portsmouth, UK.
#12
Originally Posted by sakkesepeteus View Post
I have read it too many times

And I have tryed differet emmc image files, this is the latest that I had used:
RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin
In that exempel I was just taken older one in use.

But no go.
You have either not read/executed the instructions properly, or your PC or N900 is faulty.

Download the fiasco and eMMC image to C:\Program Files\maemo\flasher-3.5

Run flasher 3.5 from the start menu

Turn off N900

Hold u key and plug in USB cable, (keep u held down for a few seconds)

flasher-3.5.exe -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f

flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -R

Leave it to think.

Done

If it comes back and says suitable device not found, unplug the N900, unplug the USB from the PC

Plug USB into another port

Plug N900 in.

You will eventually find a port that always(ish) works.

Failing that, install Ubuntu or run it from a live CD/USB and try using that.
Last edited by James_Littler; 2010-11-12 at 16:45.