Ok Moloch, gracias por la recomendacion

online translation:

Here it goes:

First what there is in almost all the post.

Unloading from (Download From):

http://repo.meego.com/MeeGo/releases...t-armv7l-n900/

These two archives:

meego-handset-armv7l-n900-1.1-mmcblk0p.raw.bz2
meego-handset-armv7l-n900-1.1-vmlinuz- 2.6.35.3 - 10.3-n900

In a terminal and the directory where they unloaded the archives, to decompress they execute:

bzip2 - d meego-handset-armv7l-n900-*-mmcblk0p.raw.bz2

Insert his microSD to the PC, or connects their N900 like “mass storage”

They need to know as his is called microSD in the PC, for it in the same terminal write:

sudo fdisk -l

The /dev/sdX is used ace an example on your PC this might sees also called /dev/mmcblk0 # CardReader#, /dev/sdc #mass storage# or something else#

That is that, can be /dev/sdX or /dev/mmcblk0X #X=algo## My experience was that with the N900 in way of mass storage it detects it like /dev/sdc and with a reader of tajetas integrated to the PC like /dev/mmcblk0

In order to pass the decompressed file to microSD #to be even in the same directory of descompresion#:

sudo dd bs=4096 if=meego-handset-armv7l-n900-1#1-mmcblk0p#raw of=/dev/mmcblk0

takes like 30 min. or a little less


Up to here everything like in another Post. But it even lacks a little but to be able to do boot from the N900.

We continue?

#si to somebody please interests to him to translate it #

Greetings