I am using PowerKernel v46 multibooted with Nitdroid Ginderbread and the omap pr1.3 Kernel i installed the h-e-n software and bought the female to female converter...i am trying to connect a transcend 4gb flash drive with fat32 file system.
I run the device at high speed. nothing happens. some times when i open file manager it says no filesystem found(this is a rarity... most of the times nothing happens at all).
can you suggest what might be going wrong?... any help will be appreciated...

My Kernel messages read:

[26428.858734] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[26428.858795] Could not flush host TX0 fifo: csr: 000a
[26428.858825] Modules linked in: ipv6 pn_pep vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev wl12xx smc91x mii omap_ssi nokia_av hci_h4p mac80211 crc7 tsc2005 bluetooth fmtx_si4713 smia_sensor ad5820 adp1653 rtc_twl4030 tsl2563 leds_twl4030_vibra lis302dl videodev v4l1_compat compat_ioctl32 rtc_core smiaregs v4l2_int_device ntfs nls_utf8 leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt
[26428.859405] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] (warn_slowpath+0x64/0x80)
[26428.859497] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a60>] (musb_h_tx_flush_fifo+0x94/0xcc)
[26428.859558] r3:00000000 r2:c0349b67
[26428.859588] r6:d80ab100 r5:0000000a r4:0000000a
[26428.859649] [<c01e99cc>] (musb_h_tx_flush_fifo+0x0/0xcc) from [<c01ea930>] (musb_cleanup_urb+0xc0/0x10c)
[26428.859710] [<c01ea870>] (musb_cleanup_urb+0x0/0x10c) from [<c01eb134>] (musb_urb_dequeue+0x1dc/0x248)
[26428.859771] [<c01eaf58>] (musb_urb_dequeue+0x0/0x248) from [<c01cec9c>] (unlink1+0x108/0x114)
[26428.859863] [<c01ceb94>] (unlink1+0x0/0x114) from [<c01cfc38>] (usb_hcd_unlink_urb+0x9c/0xf8)
[26428.859924] [<c01cfb9c>] (usb_hcd_unlink_urb+0x0/0xf8) from [<c01d0af4>] (usb_kill_urb+0x84/0x14c)
[26428.860015] r7:c93afa80 r6:c93afa80 r5:cf0a6000 r4:00000000
[26428.860046] [<c01d0a70>] (usb_kill_urb+0x0/0x14c) from [<c01d1d78>] (usb_start_wait_urb+0x80/0x120)
[26428.860137] r6:00001388 r5:cf0a7e50 r4:00000000
[26428.860168] [<c01d1cf8>] (usb_start_wait_urb+0x0/0x120) from [<c01d1ff8>] (usb_control_msg+0xc4/0xe8)
[26428.860260] [<c01d1f34>] (usb_control_msg+0x0/0xe8) from [<c01cacec>] (hub_port_init+0x3d8/0x634)
[26428.860321] [<c01ca914>] (hub_port_init+0x0/0x634) from [<c01cc3e4>] (hub_events+0x86c/0xe64)
[26428.860412] [<c01cbb78>] (hub_events+0x0/0xe64) from [<c01ce034>] (hub_thread+0x30/0x19c)
[26428.860473] [<c01ce004>] (hub_thread+0x0/0x19c) from [<c006da90>] (kthread+0x54/0x80)
[26428.860534] r6:00000000 r5:c01ce004 r4:00000000
[26428.860565] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] (do_exit+0x0/0x7bc)
[26428.860656] r5:00000000 r4:00000000
[26428.860687] ---[ end trace adbd6ed65c91e9be ]---
[26428.890655] usb 1-1: khubd timed out on ep0out len=0/0
[26435.101074] ------------[ cut here ]------------
[26435.101135] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[26435.101196] Could not flush host TX0 fifo: csr: 000a
[26435.101226] Modules linked in: ipv6 pn_pep vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev wl12xx smc91x mii omap_ssi nokia_av hci_h4p mac80211 crc7 tsc2005 bluetooth fmtx_si4713 smia_sensor ad5820 adp1653 rtc_twl4030 tsl2563 leds_twl4030_vibra lis302dl videodev v4l1_compat compat_ioctl32 rtc_core smiaregs v4l2_int_device ntfs nls_utf8 leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt
[26435.101806] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] (warn_slowpath+0x64/0x80)
[26435.101898] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a60>] (musb_h_tx_flush_fifo+0x94/0xcc)
[26435.101959] r3:00000000 r2:c0349b67
[26435.102020] r6:d80ab100 r5:0000000a r4:0000000a
[26435.102050] [<c01e99cc>] (musb_h_tx_flush_fifo+0x0/0xcc) from [<c01ea930>] (musb_cleanup_urb+0xc0/0x10c)
[26435.102111] [<c01ea870>] (musb_cleanup_urb+0x0/0x10c) from [<c01eb134>] (musb_urb_dequeue+0x1dc/0x248)
[26435.102203] [<c01eaf58>] (musb_urb_dequeue+0x0/0x248) from [<c01cec9c>] (unlink1+0x108/0x114)
[26435.102264] [<c01ceb94>] (unlink1+0x0/0x114) from [<c01cfc38>] (usb_hcd_unlink_urb+0x9c/0xf8)
[26435.102325] [<c01cfb9c>] (usb_hcd_unlink_urb+0x0/0xf8) from [<c01d0af4>] (usb_kill_urb+0x84/0x14c)
[26435.102416] r7:c93afa80 r6:c93afa80 r5:cf0a6000 r4:00000000
[26435.102478] [<c01d0a70>] (usb_kill_urb+0x0/0x14c) from [<c01d1d78>] (usb_start_wait_urb+0x80/0x120)
[26435.102539] r6:00001388 r5:cf0a7e50 r4:00000000
[26435.102600] [<c01d1cf8>] (usb_start_wait_urb+0x0/0x120) from [<c01d1ff8>] (usb_control_msg+0xc4/0xe8)
[26435.102661] [<c01d1f34>] (usb_control_msg+0x0/0xe8) from [<c01cacec>] (hub_port_init+0x3d8/0x634)
[26435.102752] [<c01ca914>] (hub_port_init+0x0/0x634) from [<c01cc3e4>] (hub_events+0x86c/0xe64)
[26435.102813] [<c01cbb78>] (hub_events+0x0/0xe64) from [<c01ce034>] (hub_thread+0x30/0x19c)
[26435.102874] [<c01ce004>] (hub_thread+0x0/0x19c) from [<c006da90>] (kthread+0x54/0x80)
[26435.102935] r6:00000000 r5:c01ce004 r4:00000000
[26435.102996] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] (do_exit+0x0/0x7bc)
[26435.103057] r5:00000000 r4:00000000
[26435.103088] ---[ end trace adbd6ed65c91e9be ]---
[26435.124694] usb 1-1: khubd timed out on ep0out len=0/0
[26435.334686] usb 1-1: device not accepting address 35, error -110
[26435.459838] usb 1-1: new full speed USB device using musb_hdrc and address 36
[26441.458312] ------------[ cut here ]------------
[26441.458374] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[26441.458404] Could not flush host TX0 fifo: csr: 000a
[26441.458404] Modules linked in: ipv6 pn_pep vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev wl12xx smc91x mii omap_ssi nokia_av hci_h4p mac80211 crc7 tsc2005 bluetooth fmtx_si4713 smia_sensor ad5820 adp1653 rtc_twl4030 tsl2563 leds_twl4030_vibra lis302dl videodev v4l1_compat compat_ioctl32 rtc_core smiaregs v4l2_int_device ntfs nls_utf8 leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt
[26441.458709] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] (warn_slowpath+0x64/0x80)
[26441.458770] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a60>] (musb_h_tx_flush_fifo+0x94/0xcc)
[26441.458801] r3:00000000 r2:c0349b67
[26441.458801] r6:d80ab100 r5:0000000a r4:0000000a
[26441.458831] [<c01e99cc>] (musb_h_tx_flush_fifo+0x0/0xcc) from [<c01ea930>] (musb_cleanup_urb+0xc0/0x10c)
[26441.458862] [<c01ea870>] (musb_cleanup_urb+0x0/0x10c) from [<c01eb134>] (musb_urb_dequeue+0x1dc/0x248)
[26441.458923] [<c01eaf58>] (musb_urb_dequeue+0x0/0x248) from [<c01cec9c>] (unlink1+0x108/0x114)
[26441.458953] [<c01ceb94>] (unlink1+0x0/0x114) from [<c01cfc38>] (usb_hcd_unlink_urb+0x9c/0xf8)
[26441.458984] [<c01cfb9c>] (usb_hcd_unlink_urb+0x0/0xf8) from [<c01d0af4>] (usb_kill_urb+0x84/0x14c)
[26441.459014] r7:c93afa80 r6:c93afa80 r5:cf0a6000 r4:00000000
[26441.459045] [<c01d0a70>] (usb_kill_urb+0x0/0x14c) from [<c01d1d78>] (usb_start_wait_urb+0x80/0x120)
[26441.459075] r6:00001388 r5:cf0a7e50 r4:00000000
[26441.459106] [<c01d1cf8>] (usb_start_wait_urb+0x0/0x120) from [<c01d1ff8>] (usb_control_msg+0xc4/0xe8)
[26441.459136] [<c01d1f34>] (usb_control_msg+0x0/0xe8) from [<c01cacec>] (hub_port_init+0x3d8/0x634)
[26441.459197] [<c01ca914>] (hub_port_init+0x0/0x634) from [<c01cc3e4>] (hub_events+0x86c/0xe64)
[26441.459228] [<c01cbb78>] (hub_events+0x0/0xe64) from [<c01ce034>] (hub_thread+0x30/0x19c)
[26441.459259] [<c01ce004>] (hub_thread+0x0/0x19c) from [<c006da90>] (kthread+0x54/0x80)
[26441.459289] r6:00000000 r5:c01ce004 r4:00000000
[26441.459320] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] (do_exit+0x0/0x7bc)
[26441.459350] r5:00000000 r4:00000000
[26441.459381] ---[ end trace adbd6ed65c91e9be ]---
[26441.542388] usb 1-1: khubd timed out on ep0out len=0/0
[26447.749176] ------------[ cut here ]------------
[26447.749267] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[26447.749298] Could not flush host TX0 fifo: csr: 000a
[26447.749328] Modules linked in: ipv6 pn_pep vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev wl12xx smc91x mii omap_ssi nokia_av hci_h4p mac80211 crc7 tsc2005 bluetooth fmtx_si4713 smia_sensor ad5820 adp1653 rtc_twl4030 tsl2563 leds_twl4030_vibra lis302dl videodev v4l1_compat compat_ioctl32 rtc_core smiaregs v4l2_int_device ntfs nls_utf8 leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt
[26447.749908] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] (warn_slowpath+0x64/0x80)
[26447.750000] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a60>] (musb_h_tx_flush_fifo+0x94/0xcc)
[26447.750091] r3:00000000 r2:c0349b67
[26447.750122] r6:d80ab100 r5:0000000a r4:0000000a
[26447.750152] [<c01e99cc>] (musb_h_tx_flush_fifo+0x0/0xcc) from [<c01ea930>] (musb_cleanup_urb+0xc0/0x10c)
[26447.750213] [<c01ea870>] (musb_cleanup_urb+0x0/0x10c) from [<c01eb134>] (musb_urb_dequeue+0x1dc/0x248)
[26447.750305] [<c01eaf58>] (musb_urb_dequeue+0x0/0x248) from [<c01cec9c>] (unlink1+0x108/0x114)
[26447.750366] [<c01ceb94>] (unlink1+0x0/0x114) from [<c01cfc38>] (usb_hcd_unlink_urb+0x9c/0xf8)
[26447.750457] [<c01cfb9c>] (usb_hcd_unlink_urb+0x0/0xf8) from [<c01d0af4>] (usb_kill_urb+0x84/0x14c)
[26447.750518] r7:c93afa80 r6:c93afa80 r5:cf0a6000 r4:00000000
[26447.750579] [<c01d0a70>] (usb_kill_urb+0x0/0x14c) from [<c01d1d78>] (usb_start_wait_urb+0x80/0x120)
[26447.750640] r6:00001388 r5:cf0a7e50 r4:00000000
[26447.750701] [<c01d1cf8>] (usb_start_wait_urb+0x0/0x120) from [<c01d1ff8>] (usb_control_msg+0xc4/0xe8)
[26447.750762] [<c01d1f34>] (usb_control_msg+0x0/0xe8) from [<c01cacec>] (hub_port_init+0x3d8/0x634)
[26447.750854] [<c01ca914>] (hub_port_init+0x0/0x634) from [<c01cc3e4>] (hub_events+0x86c/0xe64)
[26447.750915] [<c01cbb78>] (hub_events+0x0/0xe64) from [<c01ce034>] (hub_thread+0x30/0x19c)
[26447.750976] [<c01ce004>] (hub_thread+0x0/0x19c) from [<c006da90>] (kthread+0x54/0x80)
[26447.751037] r6:00000000 r5:c01ce004 r4:00000000
[26447.751098] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] (do_exit+0x0/0x7bc)
[26447.751159] r5:00000000 r4:00000000
[26447.751190] ---[ end trace adbd6ed65c91e9be ]---
[26447.824554] usb 1-1: khubd timed out on ep0out len=0/0
[26448.029937] usb 1-1: device not accepting address 36, error -110
[26448.030029] hub 1-0:1.0: unable to enumerate USB device on port 1
[26448.030059] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[26448.030090] hub 1-0:1.0: port 1 enable change, status 00000101
[26450.202667] hub 1-0:1.0: hub_suspend
[26450.202758] usb usb1: bus auto-suspend
[26450.202789] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[26450.202850] usb usb1: bus suspend fail, err -16
[26450.202880] hub 1-0:1.0: hub_resume
[26450.202941] hub 1-0:1.0: port 1: status 0101 change 0000
[26450.203033] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[26450.203125] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[26450.327026] usb 1-1: new full speed USB device using musb_hdrc and address 37
[26455.326904] usb 1-1: khubd timed out on ep0in len=0/64
[26460.327056] usb 1-1: khubd timed out on ep0in len=0/64
[26465.327239] usb 1-1: khubd timed out on ep0in len=0/64
[26465.451873] usb 1-1: device descriptor read/64, error -110
[26470.561248] usb 1-1: khubd timed out on ep0in len=0/64