Thread: It's possible to restore N900 by default?? How to hard reset?
View Single Post
m2n900 is offline m2n900
2011-02-18 , 23:12
Posts: 8 | Thanked: 2 times | Joined on Aug 2010
#38
Hello

Thanks a lot for your blog.... your solution has been untill now the closest solution that I tried to fixed my nokia n900 that caught a virus the day before yesterday

I have flashed my n900 before without any trouble, but this time im going trought a really hard time, dont know why?

the cdm keeps telling me that the device us not recognized usb?

i tried like a mention your solution... Repeat every steps a few times already, but in still a little stuck

1.- so... i uninstalled the OVI, PC suit, Software Updater, un case they are making a conflict.
2.- Unistall the cable driver, and run again the cmd, in -i mode to see the conection come up...
3.- with the device manager open, saw a few things: Disk drives show: SD1 Device witch I think is the nokia n900 under flash mode (i think this is the problem)
4.- plug the n900 holding the u, windows new hardware appear, i ignore it as advised.
5.- installed the cable driver that i downloaded from your link, a notice came up from this procedure during install, i ignore it as well, and finished the instalation. all god untill now.
6.- ? Nokia n900 (update mode) appear under network adapter with the question mark... all good untill now. command still in waitting...
7.- i did bought, cancel in one ocacion the windows new hardware windown, and the other time when trought with the offer to find driver... bought times happed the same:
looks for NOKIA USB ROOM DRIVER, BUT DOESNT INSTALLLED IT ANYWHARE, but the 2 drivers that get installed are: Nokia BB5 ADL PARENT, AND LOADER OR SOMETHING LIKE THAT....
8.- for a second the cdm recognizes the device!!!.. and this comes up:
usb devoces found at bus bus-0, device address \\.\libus0-0001--0x0421-0x0105
found device rx-51 hardware revision 2101
nolo version 1-4-14
version of 'sw-release': rx-51_2009SE_20.2010.36-2.002_PR_002
Booting device into flash mode
suitable usb device not found

that is all......

JUST AS I WAS FINISHING!!!... damm..... close....

Am I missing a step? making any mistakes?

I will really APPRECIATE YOUR HELP!!!!... i live in a litthe town in Ecuador, Ibarra... very charming, but TECH FREE ZONE!!.. so I have to fixed this myself!!!!...

Thanks a lot for your time and help...

M2.

Originally Posted by archebyte View Post
NSU will update only if there is a version newer than the one installed on the device.

Are you using XP? It may be simpler to just flash directly. Its simple and takes less than 5 minutes.

1. Download and install Flasher (maemo_flasher-3.5_2.5.2.2.exe).
2. Download the firmware file and Save to 'c:\Program Files\maemo\flasher-3.5\'
3. Open the command prompt. Start + Run. Type cmd and press Enter.
4. Change directory to the flasher program.
Code:
cd "c:\Program Files\maemo\flasher-3.5"
5. Connect USB cable while pressing 'u' key (details on the wiki)
6. Run the command on windows is
Code:
flasher-3.5.exe -F RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin -f -R