View Single Post
atilla's Avatar
Posts: 1,210 | Thanked: 597 times | Joined on Apr 2010 @ hamburg,germany
#9
Originally Posted by HtheB View Post
Flash your phone (EMMC)
(default procedure, remove battery, connect usb cable, HOLD U Button on your N900, insert battery)
flash your EMMC (WITHOUT THE REBOOT OPTION).

after it's done, remove the battery, wait a couple seconds, HOLD U Button on your N900, insert battery back again.

Then flash your phone again but with the newest FW.
This should work
sry dude but you are wrong.
from the wiki :
When flashing the eMMC content, always flash the eMMC/VANILLA image first, and then flash the FIASCO/Rootfs image. Do not boot up the device between the two i.e do NOT use the -R parameter at the end! Rationale: on accidental booting in between the 2 flash processes, the sequence formerly suggested (rootfs first) will result in a broken system. The sequence "eMMC first, then rootfs" is checked back with Nokia affiliates and is proven to work. The former advice on tablets-dev.nokia.com was not based on any facts for the recent eMMC VANILLA image. It's fixed now and in line with this wiki .

wiki: http://wiki.maemo.org/Updating_the_firmware
__________________


Nobody likes us but we dont care....