Thread: [Announce] USB hostmode beta release
View Single Post
AndrewX192 is offline AndrewX192
2011-03-19 , 01:25
Posts: 139 | Thanked: 97 times | Joined on Nov 2010 @ United States
#764
UPDATE - 03/18/2011 18:54PM PST: This issue was caused by a faulty USB cable.
So, I finally got my adapter in the mail today, and I followed the steps as shown on http://www.youtube.com/watch?v=3IyeSNGCWTA

But, instead of getting the network card to work, I got these errors:
[ 1098.497711] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
[ 1099.323669] usb 1-1: khubd timed out on ep0in len=0/64
[ 1099.385955] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1099.386016] musb_h_ep0_irq 1083: no URB for end 0
[ 1099.448547] usb 1-1: device descriptor read/64, error -110
[ 1099.579681] Forced hostmode error: no device attached
[ 1099.620391] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1099.620605] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1099.620666] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 1099.620727] hub 1-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
[ 1099.776733] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 1099.839294] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1099.901824] usb 1-1: new full speed USB device using musb_hdrc and address 91
[ 1099.964263] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1100.026794] usb 1-1: device descriptor read/64, error -71
[ 1100.198638] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1100.261077] usb 1-1: device descriptor read/64, error -71
[ 1100.432952] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1100.495574] usb 1-1: new full speed USB device using musb_hdrc and address 92
[ 1100.557983] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1100.620544] usb 1-1: device descriptor read/64, error -71
[ 1100.792358] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1100.854858] usb 1-1: device descriptor read/64, error -71
[ 1101.026794] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1101.089294] usb 1-1: new full speed USB device using musb_hdrc and address 93
[ 1101.511138] usb 1-1: device not accepting address 93, error -71
[ 1101.573669] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1101.636169] usb 1-1: new full speed USB device using musb_hdrc and address 94
With "Full Speed" selected, I get:


[ 1254.323669] usb 1-1: khubd timed out on ep0in len=0/64
[ 1259.323577] usb 1-1: khubd timed out on ep0in len=0/64
[ 1259.704864] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
[ 1259.800170] usb 1-1: device descriptor read/64, error -71
[ 1260.034576] usb 1-1: device descriptor read/64, error -71
[ 1260.269012] usb 1-1: new full speed USB device using musb_hdrc and address 86
[ 1260.394042] usb 1-1: device descriptor read/64, error -71
[ 1260.628234] usb 1-1: device descriptor read/64, error -71
[ 1260.862762] usb 1-1: new full speed USB device using musb_hdrc and address 87
[ 1261.284484] usb 1-1: device not accepting address 87, error -71
[ 1261.347259] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1261.347320] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 1261.347412] hub 1-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
[ 1261.503326] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 1261.628417] usb 1-1: new full speed USB device using musb_hdrc and address 89
[ 1261.753326] usb 1-1: device descriptor read/64, error -71
[ 1261.987701] usb 1-1: device descriptor read/64, error -71
[ 1262.222106] usb 1-1: new full speed USB device using musb_hdrc and address 90
[ 1262.347167] usb 1-1: device descriptor read/64, error -71
[ 1262.581451] usb 1-1: device descriptor read/64, error -71
[ 1262.815887] usb 1-1: new full speed USB device using musb_hdrc and address 91
[ 1263.237609] usb 1-1: device not accepting address 91, error -71
[ 1263.362854] usb 1-1: new full speed USB device using musb_hdrc and address 92
The network card does not show up in lusb, or ifconfig -a.

UPDATE - 03/18/2011 18:54PM PST: This issue was caused by a faulty USB cable.
Last edited by AndrewX192; 2011-03-19 at 07:49. Reason: Adding better notification that the issue is resolved.