maemo.org - Talk - View Single Post

J4ZZ	2011-03-25 , 15:57
Posts: 539 \| Thanked: 518 times \| Joined on May 2010 @ nanaurbusiness	#23

Originally Posted by pursueky

it failed to flash the emmc again after i reinstall the kernel

It's not reinstalling the kernel it's "changing the kernel"

Here's it how it works...

First of all you need two firmware images PR1.2 and PR1.3 for example

Code:

• PR1.3 = RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM

• PR1.2 = RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM

PR1.1.1 will work also...

Then you need a matching emmc image (PR1.3_original or a custom image file for bigger apps partition)

Code:

• PR1.3 RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin 

• 5GB Apps 24GB MyDocs:
http://www.mediafire.com/?j6srnaxwr3notaf 

• 8GB Apps 21GB MyDocs:
http://www.mediafire.com/?5o1hkuuwhn8hh1c

1. Flash PR1.3

Code:

flasher-3.5 -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f

2. Flash only Kernel of PR1.2

Code:

flasher-3.5 -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin --flash-only=kernel -f

3. Flash your EMMC (custom or PR1.3)

Code:

flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f

4. Reflash PR1.3 firmware (see 1.) or try --flash-only=kernel but with the PR1.3 image (see 2.)

:cheers:

..::J4ZZ::..

Last edited by J4ZZ; 2011-04-10 at 14:11.

Quote & Reply |

The Following User Says Thank You to J4ZZ For This Useful Post:
SNOFRI