maemo.org - Talk - View Single Post - Change profile on gsm cell change or get cell id.

	spag	2011-04-08 , 12:09
	Posts: 121 \| Thanked: 275 times \| Joined on Oct 2009 @ Blackhawk Island	#7

Originally Posted by jgbreezer

Do you know what the signal emitted is every time the cell id changes, if there is one - or a more trigger-based action rather than polling it if there's an alternative to dbus?

Here some signals copypasted from NetMon. Maybe this helps you somewhat:

Code:

      bus.add_signal_receiver(signal_registration_status_change, dbus_interface = "Phone.Net", signal_name = "registration_status_change")           
                bus.add_signal_receiver(signal_signal_strength_change, dbus_interface = "Phone.Net", signal_name = "signal_strength_change")                   
                bus.add_signal_receiver(signal_network_time_info_change, dbus_interface = "Phone.Net", signal_name = "network_time_info_change")               
                bus.add_signal_receiver(signal_cellular_system_state_change, dbus_interface = "Phone.Net", signal_name = "cellular_system_state_change")       
                bus.add_signal_receiver(signal_radio_access_technology_change, dbus_interface = "Phone.Net", signal_name = "radio_access_technology_change")   
                bus.add_signal_receiver(signal_radio_info_change, dbus_interface = "Phone.Net", signal_name = "radio_info_change")                             
                bus.add_signal_receiver(signal_cell_info_change, dbus_interface = "Phone.Net", signal_name = "cell_info_change")                               
                bus.add_signal_receiver(signal_operator_name_change, dbus_interface = "Phone.Net", signal_name = "operator_name_change")

Quote & Reply |