Thread
:
Cant' flash N900: Returns %m
View Single Post
Naomik
2011-04-16 , 07:51
Posts: 16 | Thanked: 1 time | Joined on Apr 2011
#
1
Title says it all.
Ever since I switched over to AT&T I have been having some very strange issues with my device (read: ever since a customer service rep. suddenly pulled the battery out while it was running)
1. The N900 has been rebooting with the following message on restart:
unexpected reboot, your kernel settings were not saved
2. There have been sudden changes in all titles (everything has a bunch of letters and numbers before things as simple as yes and no buttons).
3. I am also asked to allow roaming to connect to the network internet (otherwise I cannot connect) even though I am fully within the coverage area. Even then the connection keeps getting disconnected.
4. X-terminal returns no errors.
So I decided to attempt a flash ( renamed firmware and eMMC as RX-51.bin and R.bin respectively)
However, when I run :
flasher-3.5.exe -F R.bin -f -R
I receive:
R.bin: %m
Any thoughts?
Quote & Reply
|
Naomik
View Public Profile
Send a private message to Naomik
Find all posts by Naomik