Dear Mveplus,

I had purchased new usb adapter managed to get ip when connected to linux dhcp server but when i connected to normal cisco router iam not managed to get the IP with dmesg eth0: no IPv6 routers present and /etc/udhcpc/default.script: exec: line 7: /etc/udhcpc/default.zeroconf: not found.

How to disable the IPV6? and also regarding the missing file default.zeroconf: not found



2.6.28/drivers/usb/core/inode.c: creating file '003'
[ 852.006439] usb 1-1: New USB device found, idVendor=9710, idProduct=7830
[ 852.006469] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 852.006500] usb 1-1: Product: USB-MAC Controller
[ 852.006500] usb 1-1: Manufacturer: Moschip Semiconductor
[ 852.006530] usb 1-1: SerialNumber: 6e0002c5

ome/user # udhcpc
udhcpc (v0.9.9-pre) started
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Lease failed:
zeroconf: address selected is 169.254.59.32
zeroconf: state is Active/Announce, Link-local address 169.254.59.32
bogus packet, option fields too long: Read past the packet length when getting option 0x1 (308 >= 308)
bogus packet, option fields too long: Read past the packet length when getting option 0x2 (308 >= 308)
bogus packet, option fields too long: Read past the packet length when getting option 0x3 (308 >= 308)
bogus packet, option fields too long: Read past the packet length when getting option 0x4 (308 >= 308)
bogus packet, option fields too long: Read past the packet length when getting option 0x5 (308 >= 308)
/etc/udhcpc/default.script: exec: line 7: /etc/udhcpc/default.zeroconf: not found

1704.260009] eth0: no IPv6 routers present
[ 1934.111663] slide (GPIO 71) is now closed
[ 1943.283477] proximity (GPIO 89) is now closed
[ 1944.722686] proximity (GPIO 89) is now open
[ 1996.363342] proximity (GPIO 89) is now closed
[ 2000.596069] proximity (GPIO 89) is now open
[ 2039.041351] slide (GPIO 71) is now open
/home/user #