Active Topics

 


Reply
Thread Tools
taixzo is offline taixzo
2019-01-02 , 17:24
Posts: 959 | Thanked: 3,427 times | Joined on Apr 2012
#1
Not sure exactly where to put this, since there's no "xperia" category in the devices forum. Anyway, here goes:
For the past month or so, the USB port on my Xperia X has stopped "locking" a cable in - you plug it in and the cable just slides out, like an ethernet cord that's missing the little clip. I've been making do by standing the phone up vertically and relying on gravity to hold it onto the cable.
Recently, it's gotten more and more finicky about actually charging. I have to wiggle the cable and get the exact right angle. As of yesterday I can no longer get it to charge at all. Given that unlike the N900 the battery is not removable, is there any way to fix this USB port issue so I can continue to use the phone?
__________________
Saera: A Siri clone for the N900, N9(50) and Jolla

Follow me on Twitter: twitter.com/taixzo
 

The Following User Says Thank You to taixzo For This Useful Post:
nieldk is offline nieldk
2019-01-02 , 20:04
Posts: 1,293 | Thanked: 4,319 times | Joined on Oct 2014
#2
Possibly, start by looking at here

https://www.ifixit.com/Device/Sony_Xperia_X
__________________
You can still support my work by donation - click here
 

The Following 7 Users Say Thank You to nieldk For This Useful Post:
pichlo's Avatar
pichlo is offline pichlo
2019-01-03 , 08:20
Posts: 6,447 | Thanked: 20,981 times | Joined on Sep 2012 @ UK
#3
Originally Posted by taixzo View Post
Not sure exactly where to put this, since there's no "xperia" category in the devices forum.
Competitors?
__________________
Русский военный корабль, иди нахуй!
 

The Following 2 Users Say Thank You to pichlo For This Useful Post:
atlochowski is offline atlochowski
2019-01-03 , 10:29
Posts: 207 | Thanked: 759 times | Joined on Dec 2014 @ Poland
#4
https://www.ebay.co.uk/itm/New-Repla...0AAOSw89pborGe

or cheaper from Aliexpress

https://www.aliexpress.com/item/Orig...a-018170bc8562
 

The Following 5 Users Say Thank You to atlochowski For This Useful Post:
deutch1976 is offline deutch1976
2019-01-03 , 11:20
Posts: 701 | Thanked: 1,981 times | Joined on Jun 2015 @ Lisbon - Portugal
#5
It is very easy to replace
 

The Following 5 Users Say Thank You to deutch1976 For This Useful Post:
herdem09 is offline herdem09
2019-01-04 , 08:22
Posts: 96 | Thanked: 125 times | Joined on Jul 2012 @ Turkey
#6
Have you considered cleaning it with a toothpick?
I had the same until my friend cleaned all the dust in there.
 

The Following 4 Users Say Thank You to herdem09 For This Useful Post:
pagis is offline pagis
2019-01-04 , 10:08
Posts: 233 | Thanked: 532 times | Joined on Sep 2011
#7
Originally Posted by deutch1976 View Post
It is very easy to replace
True, the biggest issue is a) to open the back panel which is made of aluminum and dents easily, b) shield the panel when you put it back.
 

The Following 2 Users Say Thank You to pagis For This Useful Post:
deutch1976 is offline deutch1976
2019-01-04 , 11:09
Posts: 701 | Thanked: 1,981 times | Joined on Jun 2015 @ Lisbon - Portugal
#8
Originally Posted by pagis View Post
True, the biggest issue is a) to open the back panel which is made of aluminum and dents easily, b) shield the panel when you put it back.
You have to heat it a little. It is doable with an hair dryer. To glue it back there are stickers on ebay for less than 1€
 

The Following 2 Users Say Thank You to deutch1976 For This Useful Post:
pagis is offline pagis
2019-01-04 , 15:46
Posts: 233 | Thanked: 532 times | Joined on Sep 2011
#9
Originally Posted by deutch1976 View Post
You have to heat it a little. It is doable with an hair dryer. To glue it back there are stickers on ebay for less than 1€
I did send my device (X) for repair under official guarantee, it came back fixed, but the back panel at some corners came loose. I've ordered 3M stickers from ebay and tried to repair it few times unsuccessfully.

Actually some time after the repair the device stopped charging. I thought the USB socket was damaged and ordered a new charging port, just to find out the port connector to the mainboard was not plugged in properly (not really impressed by the official service).

As the back panel is made of aluminum, it gets slightly distorted/twisted when it gets removed. The twist is very slight and almost impossible to make it straight. Then when you put it back after some time the pressure of the twisted corner comes slightly detached . At least, that's my experience.

I was considering buying a brand new back panel, but I could not find a complete one, i.e. back panel plus camera glass, plus some copper stickers (which form part of the main device circuitry?)
Last edited by pagis; 2019-01-04 at 15:54.
 

The Following 2 Users Say Thank You to pagis For This Useful Post:
aspergerguy is offline aspergerguy
2019-01-04 , 16:14
Posts: 807 | Thanked: 1,589 times | Joined on Aug 2014
#10
Originally Posted by pagis View Post
I was considering buying a brand new back panel, but I could not find a complete one, i.e. back panel plus camera glass, plus some copper stickers (which form part of the main device circuitry?)
Still available:https://www.replacebase.co.uk/sony-x...lens-grey-oem/
 

The Following 3 Users Say Thank You to aspergerguy For This Useful Post:
Reply

Tags
charging, repair, usb port, xperia x

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 20:01.

Contact Us - Home - Archive - Top