Active Topics
-
Firefox with Leste (10)
to Maemo 7 / Leste by teroyk - 3 days, 8 hrs ago - more...
|
2010-11-06
, 03:58
|
|
Posts: 2 |
Thanked: 1 time |
Joined on Nov 2010
|
#2
|
So I have made a bit of progress. The flash keeps dying at cmt-mcusw. From doing a search noticed that the only items left after cmt-mcusw was the kernel and rootfs. So I extracted the pr1.3 image:
flasher-3.5 -u RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin
then manually installed the kernel with
flasher-3.5 -k zImage -f
and then finally rootfs
flasher-3.5 -r rootfs-jffs2 -f -R
Both installed with no errors. The phone started up fine with the new flash. The only things I noticed was when Settings...About Nokia was selected the settings panel would shut down with an error and the Nokia information screen in Settings shows the version as <unknown>. I tried to flash again using the full bin image but it died again at cmt-mcusw. Question what does cmt-mcusw do, how can I get it installed?
flasher-3.5 -u RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin
then manually installed the kernel with
flasher-3.5 -k zImage -f
and then finally rootfs
flasher-3.5 -r rootfs-jffs2 -f -R
Both installed with no errors. The phone started up fine with the new flash. The only things I noticed was when Settings...About Nokia was selected the settings panel would shut down with an error and the Nokia information screen in Settings shows the version as <unknown>. I tried to flash again using the full bin image but it died again at cmt-mcusw. Question what does cmt-mcusw do, how can I get it installed?
| The Following User Says Thank You to banter For This Useful Post: | ||
|
|
2022-10-13
, 16:36
|
|
Posts: 55 |
Thanked: 138 times |
Joined on Jul 2011
@ Bulgaria
|
#3
|
Originally Posted by banter
Thank you, 12 years later this still works on Ubuntu 22.04
So I have made a bit of progress. The flash keeps dying at cmt-mcusw. From doing a search noticed that the only items left after cmt-mcusw was the kernel and rootfs. So I extracted the pr1.3 image:
flasher-3.5 -u RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin
then manually installed the kernel with
flasher-3.5 -k zImage -f
and then finally rootfs
flasher-3.5 -r rootfs-jffs2 -f -R
Both installed with no errors. The phone started up fine with the new flash. The only things I noticed was when Settings...About Nokia was selected the settings panel would shut down with an error and the Nokia information screen in Settings shows the version as <unknown>. I tried to flash again using the full bin image but it died again at cmt-mcusw. Question what does cmt-mcusw do, how can I get it installed?
I've managed to resurrect a second-hand N900. Unfortunately there is a new challenge "enter lock code" and have no idea what's the code.
|
|
2022-10-14
, 14:27
|
|
Posts: 807 |
Thanked: 1,589 times |
Joined on Aug 2014
|
#4
|
Originally Posted by leon.anavi
Try this method: https://talk.maemo.org/showpost.php?...2&postcount=22
Thank you, 12 years later this still works on Ubuntu 22.04
flasher-3.5 -F RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin -f, while holding the u and plugging in.
I also tried to cold flash with
flasher-3.5 -c -h RX-51:2201 -S usb -F RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin -f but received the same errors listed here:
<snip>
flashing cmt-mcusw... Sending request 0x50 failed!
Bootloader error log follows:
ERROR: Invalid argument for 'cmt'
ERROR: Error processing request, stalling
ERROR: EP0 STALL sent
ERRO CMT 2nd didn't wake up
ERROR: Error processing request, stalling
ERROR: EP0 STALL sent
ERROR: Premature end of control transfer
I have noticed in the Settings -> General -> About product the version info is <unknown>. Any ideas, to force a flash. Or Is it possible to reformat and start fresh.
Last edited by banter; 2010-11-02 at 03:56.