Active Topics

 


Page 2 of 2 1 2
Reply
Thread Tools
kumardodla is offline kumardodla
2022-11-21 , 07:20
Posts: 58 | Thanked: 10 times | Joined on May 2012 @ india
#11
Originally Posted by aspergerguy View Post
Have you looked here?
http://www.thegadgetfreak.net/2012/0...ioning-n9.html
Yes, I have tried to follow the procedure in the link. But few files are not present in the provided link. Also My Nokia N9 not able to charge via flasher as well. So planning to visit a phone repair shop.
 
aspergerguy is offline aspergerguy
2022-11-22 , 16:06
Posts: 807 | Thanked: 1,589 times | Joined on Aug 2014
#12
Originally Posted by kumardodla View Post
Yes, I have tried to follow the procedure in the link. But few files are not present in the provided link. Also My Nokia N9 not able to charge via flasher as well. So planning to visit a phone repair shop.
Is this resource any better?
https://tobru.ch/access-a-locked-nokia-n9-meego-phone/

With regards to battery charging via Harmattan flasher, if battery at 0% can take many minutes before any result at all.
 
kumardodla is offline kumardodla
2022-11-22 , 18:30
Posts: 58 | Thanked: 10 times | Joined on May 2012 @ india
#13
Originally Posted by aspergerguy View Post
Is this resource any better?
https://tobru.ch/access-a-locked-nokia-n9-meego-phone/

With regards to battery charging via Harmattan flasher, if battery at 0% can take many minutes before any result at all.
Thank you. I got the files from the previous post link, finally after multiple attempts with multiple laptops the mobile is able to charge via flasher.

Code:
C:\Program Files\Nokia\Flasher>flasher -i
flasher 3.12.1 (Oct  6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_005
Success
Output from flasher -f -F main.bin


Code:
C:\Program Files\Nokia\Flasher>flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958_ARM.bin
flasher 3.12.1 (Oct  6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_005
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 27294 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_005
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped
Charging battery, 10 % battery level (11 % required). Ctrl-c to exit
Battery level 11 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[_] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[_] kernel       [writing     37 %    2048 /    2714 kB    4080 kB/s]
[_] rootfs       [writing      0 %    1024 / 1170162 kB      NA     ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]
[_] cmt-mcusw    [finishing    0 %    6050 /    6050 kB    3233 kB/s]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    1673 kB/s]
[f] rootfs       [writing      0 %    4096 / 1170162 kB      NA     ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]
[f] cmt-mcusw    [finishing    0 %    6050 /    6050 kB    3233 kB/s]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    1673 kB/s]
[f] rootfs       [writing      0 %    4096 / 1170162 kB      NA     ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: handle_buffer failed in lzo decompress (-1)
[Pipe   4] Finishing in error state with status 1
MTC_NOS_READY not received
MTC_NOS_READY not received
MTC_NOS_READY not received
CMT RFS failed
[Pipe   7] Finishing in error state with status 1
========================================

ERROR: Failed to flash images
Currently working on ubuntu installation, will see how it works.
 
kumardodla is offline kumardodla
2022-11-22 , 21:14
Posts: 58 | Thanked: 10 times | Joined on May 2012 @ india
#14
Installed Ubuntu and tried the procedure from the below link but no luck.

http://www.thegadgetfreak.net/2012/0...ioning-n9.html

Code:
ubuntu@ubuntu:/media/ubuntu/761C70B01C706CCD/WD_320_Back_up/F_Drive/Nokia/Nokia N9 partition$ sudo flasher --load -k vmlinuz-2.6.32.20112201-11.2-adaptation-n950-bootloader  -n initrd.img-rescue-2.6.32.20112201-11.2-n950  --boot
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 032.
Device identifier: 357923044048611 (SN: N/A)
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_005
Sending kernel image (2497 kB)...
100% (2497 of 2497 kB, avg. 41631 kB/s)
Sending initfs image (1920 kB)...
100% (1920 of 1920 kB, avg. 36226 kB/s)
Success
After that nothing happens , but in the link he mentioned that the device will mount automatically and we can create partition.

The phone is displayed with message and it is attached here.
Attached Images
 
 
kumardodla is offline kumardodla
2022-11-23 , 06:09
Posts: 58 | Thanked: 10 times | Joined on May 2012 @ india
#15
When It is flash mode, I have issued a lsusb command in ubuntu and it shows Nokia N900/N950.

u
Code:
buntu@ubuntu:/$ lsusb
Bus 001 Device 002: ID 8087:8000 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 04f3:0203 Elan Microelectronics Corp. Touchscreen
Bus 002 Device 004: ID 8087:07dc Intel Corp. Bluetooth wireless interface
Bus 002 Device 003: ID 0c45:6705 Microdia Integrated HD Webcam
Bus 002 Device 042: ID 0421:01c8 Nokia Mobile Phones N900/N950 (PC-Suite Mode)
Bus 002 Device 002: ID 8564:1000 Transcend Information, Inc. JetFlash
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sudo dmesg is showing the device Nokia N9 with multiple errors. Attached the dmesg report. I'm new to linux, can anyone tell me the issue here in mounting the device?
Attached Files
File Type: zip dmesg details.zip (33.8 KB, 55 views)
 
aspergerguy is offline aspergerguy
2022-11-23 , 15:54
Posts: 807 | Thanked: 1,589 times | Joined on Aug 2014
#16
Hi,
Have you tried flashing eMMC at same time?
Another resource especially see posts by YavkatA with Linux commands:
https://talk.maemo.org/showthread.php?t=82655&page=2
 
kumardodla is offline kumardodla
2022-11-23 , 19:29
Posts: 58 | Thanked: 10 times | Joined on May 2012 @ india
#17
Originally Posted by aspergerguy View Post
Hi,
Have you tried flashing eMMC at same time?
Another resource especially see posts by YavkatA with Linux commands:
https://talk.maemo.org/showthread.php?t=82655&page=2
Hi,
Yes, I have followed the procedure from the link and tried other threads as well. After flasher load step nothing shows in the ubuntu
https://talk.maemo.org/showthread.php?t=82655
https://talk.maemo.org/showthread.php?t=100710
Code:
sudo fdisk -l
Code:
lsblk
I assume some other thing is holding it from mount . I hope the NAND memory is good. I'm planning to bring it to a technician to check for NAND condition. Since the device is 10 years old spare parts also not available in my country as it is not officially launched here.
 
Reply
Page 2 of 2 1 2

Tags
gps fix, gps n900, gps navigation, gps problem

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 12:55.

Contact Us - Home - Archive - Top