Big thanks or sexy ilove is NOT enough . You own fatalsaint a thorough report, what does NOT work, or at least the error message, and what changes you made to make it work.


bun

You beat me to it..

Glad I could help Ice but post what the problem was and how you fixed it so that others can benefit if they have similar problems with dual booting. More knowledge on this forum the better.

i just did what it says and after i reboot it ask me where to boot...
so this is probably what im missing thats why i cant boot from mmc.

now that i know this i cloned chinook on the external memcard using PB's clone to external mmc. and my INternal mmc is diablo together with the flash.

but what ive noticed is that, i have 8GB external mmc. after i cloned chinook usind PB's clone to ext mmc the only available left is about 4XX MB. (cant remember the exact digits)

im not that familiar with the size of an OS clone, but it partition my ext mmc and just left me a little space for storage.

another thing... on the diablo OS i get annoyed with the internal application error. email closed thing. so i decided to do it all again and just reflash my N810 to chinook.

i will just go back to diablo if that anoying internal application error is fixed.

thanks guys for the help!!!

I think you might be seeing the 512mb FAT partition that IIRC PB's installer will make on a 8gb.. on an 8gb SD card you should have at least 6-7gb free depending how much software was installed on your chinook before cloning.

I cloned to my internal 2gb and had 1.5gb left after the 128mb FAT partition and the OS loaded.

If you boot to the external card and run df -h in a terminal; what do you see?