T-Mobile Edge Connection Help Please - maemo.org

Active Topics

Maemo repository (9)
to Community by nokiafemboy - 9 hrs, 49 mins ago
Error after installing Leste on sdcard (18)
to Maemo 7 / Leste by Maemish - 1 day, 1 hr ago
Maemo 20th Anniversary (4)
to Brainstorm by teroyk - 2 days, 20 hrs ago
Nokia Booklet 3G (RX-75) Drivers (64)
to Alternatives by teroyk - 2 days, 20 hrs ago
Porting apps to Leste (46)
to Maemo 7 / Leste by teroyk - 5 days ago
more...

Thread Tools

dr_kludge	2006-09-18 , 23:49
Posts: 5 \| Thanked: 0 times \| Joined on Jan 2006	#1

Can I buy a vowel? Perhaps several?

Anyhow, I've searched all over the Internet. I have T-Mobile almost connecting with a Linux box. You see I thought I try a full scale Linux box before going down to the narrow confines of the 770. Both the 770 and the Linux computer(Fedora) use bluez tools so I thought this would be a hope skip and a jump. I am using a Samsung T-809 as a modem. I'd really like to use it as a bluetooth modem but it would be nice to know how to do this with a host enabled USB connection from the Nokia 770.

I am a total noob as far as T-Mobile and using cell phones as modems. I've also been spoiled by years of high speed Internet connections so I have forgotten everything I knew about dial-up networking. LOL it was like going from 2400baud to 56K was such a wonder ummm...so many years (13+) ago. Other geek and linux skils are high, however.

The two key pieces of information that I am using are

Code:

...
SAY	'Setting APN\n'
OK	'AT+CGDCONT=1, ”IP”, ”internet2.voicestream.com”'
...
OK	'ATD*99#'
CONNECT	' '

I see that some people have already connected with T-Mobile. In some respects it looks like more of the correct settings than the hardware. So can anyone provide some hints please?

Thanks,
Greg

tmobile-connect scripts follow.

Code:

# A bluetooth rfcomm0 script for T-Mobile
# /etc/ppp/peers/tmobile
# use 
#     pppd call tmobile
# at the command line.
#
/dev/rfcomm0	# bluetooth modem serial port.
115200		# Set the Speed
defaultroute	# Use the cellular network for the default route
usepeerdns	# Use the DNS servers from the remote network
nodetach	# Keep ppd in the foreground
crtscts		# Hardware flow control
# noccp		# http://www.howtoforge.com/linux_internet_access_gprs_edge_via_bluetooth_gsm_phone
lock		# Lock the bluetooth serial port
# http://www.handhelds.org/pipermail/ipaq/179/17993.html
# > Connect: ppp0 <--> /dev/rfcomm0
# > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe66e9a52>]
# > rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <auth pap>]
# 
# The above line is the remote end asking for authentication....
# 
# > sent [LCP ConfRej id=0x1 <auth pap>]
# 
# ...which your machine rejects because of the "noauth" option...
# 
# > rcvd [LCP TermReq id=0x3 "peer refused to authenticate"]
# 
# ...so the remote machine terminates the connection. I don't think you
# actually want the "noauth" option. 
# noauth		# Don't expect the modem to authenticate itself
local		# Don't use the Carrier Detect or Data Terminal Ready
# ipcp-accept-remote		# http://www.howtoforge.com/linux_internet_access_gprs_edge_via_bluetooth_gsm_phone
# ipcp-accept-local		# http://www.howtoforge.com/linux_internet_access_gprs_edge_via_bluetooth_gsm_phone
# noipdefault		# http://www.howtoforge.com/linux_internet_access_gprs_edge_via_bluetooth_gsm_phone
debug
# http://www.pharscape.org/component/option,com_forum/Itemid,68/page,viewtopic/p,223/sid,9978f1956d38cbed8e41471182043dfc/
# As for my config. I also have "local" and don't have "asyncmap 0"
# http://www.handhelds.org/pipermail/ipaq/179/17994.html
# asyncmap 0
noauth
hide-password
mru 1500
kdebug 2
mtu 1500
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx 

# Use the next two lines if you receive the dreaded messages:
#
#    No repsonse to n echo-requests
#    Serial link appears to be disconnected
#    Connection terminated.
#
# lcp-echo-failure 4
# lcp-echo-interval 65535

connect		"/usr/sbin/chat -v -f /etc/chatscripts/tmobile-connect"
disconnect	"/usr/sbin/chat -v -f /etc/chatscripts/tmobile-disconnect"

Code:

# File: /etc/chatscripts/tmobile-connect
#
TIMEOUT	10
ABORT	'BUSY'
ABORT	'NO ANSWER'
ABORT	'ERROR'
SAY	'Starting GPRS connect script\n'

SAY	'Reset Modem\n'
# Get the modem's attention and reset it.
""	'ATZ'

SAY	'Use no echo and English result codes\n'
# E0=No echo, V1=English result codes
OK	'ATE0V1'

# Set Access Point Name (APN)
SAY	'Setting APN\n'
OK	'AT+CGDCONT=1, ”IP”, ”internet2.voicestream.com”'
# From http://t809.blogspot.com/2005/12/samsung-t809-faq.html
# I am trying to connect to EDGE or GPRS or T-Zones from my laptop using my t809 as a Bluetooth Modem, but when I dial out I receive the following error:
# 
# Error 734: The PPP link control protocol was terminated.
# 
# You need to add an additional setting:
# On Windows 2000 (XP will be similar), do the following:
# *Control Panel -> Phone and Modem Options, Modem tab (highlight bluetooth modem),
# *Properties, Advanced tab. In Extra initialization commands enter:
# 
# +cgdcont=1,"IP","internet2.voicestream.com","",0,0
# 
# *Click OK twice to save it, and dial out! You might have to reboot, I didn't.
# OK	'AT+CGDCONT=1,"IP","internet2.voicestream.com","",0,0'

# Dial the number
ABORT	'NO CARRIER'
SAY	'Dialing...\n'
# original
# OK	'ATD*99***1#'
# http://www.internettablettalk.com/forums/showpost.php?p=10146&postcount=19
OK	'ATD*99#'
CONNECT	''

Code:

# File: /etc/chatscripts/tmobile-disconnect
#
# Send a control k to disconnect.
""	'\k'
# Now disconnect from modem.
""	'+++ATH0'
SAY	'GPRS disconnected.'