Page 2 of 2 1 2
Reply
Thread Tools
Kroll is offline Kroll
2010-02-12 , 19:42
Posts: 637 | Thanked: 445 times | Joined on Dec 2009 @ Kaliningrad, Russia
#11
Originally Posted by Ilmanowar View Post
Without the mmc it boot (till the sound of Nokia and the splash screen of the 2 hands) but it keep in a blank screen!
In this state the bluetooth is working and I can lock the touch screen (it appears the "lock screen" or "unlock screen" message).
I think that the solution is to succeed to boot from a mmc, because the R&D mode can't help in this case.

I wrong something?
Any suggestion?
Thanks.
Ok, you broke the Hildon.
R&D mode stops rebooting so you can try to do something. In my case a long time ago I installed a link to X-Terminal in the Power menu (the button on the top ctnter of n810) and when I press it I can open the terminal (if it doesn't open i do the next: tap on "soft poweroff", then turn it on again and tap on X-Terminal link, may be a few times more again) and then
Code:
etc/init.d/hildon-desktop start
If you are not able to go to the terminal... sorry, I don't know
And how you broke Hildon?
 
maacruz is offline maacruz
2010-02-13 , 11:15
Posts: 1,101 | Thanked: 1,184 times | Joined on Aug 2008 @ Spain
#12
Originally Posted by Ilmanowar View Post

I think that the solution is to succeed to boot from a mmc, because the R&D mode can't help in this case.

I wrong something?
Any suggestion?
Thanks.
It must be in your partitioning. The only thing I can do is to post here my setup
Code:
/# cal-tool -r
mmc
/# fdisk -l /dev/mmcblk0

Disk /dev/mmcblk0: 4089 MB, 4089446400 bytes
4 heads, 16 sectors/track, 124800 cylinders
Units = cylinders of 64 * 512 = 32768 bytes

        Device Boot    Start       End    Blocks   Id  System
/dev/mmcblk0p1             129       92738     2963520    b  Win95 FAT32
Partition 1 does not end on cylinder boundary.
/dev/mmcblk0p2           92863      124740     1020096   83  Linux
Partition 2 does not end on cylinder boundary.
So, you see I have set boot from 'mmc', and I have two partitions, the first one is FAT and the second one ext2, where the OS resides.
 
Ilmanowar is offline Ilmanowar
2010-02-14 , 09:26
Posts: 48 | Thanked: 85 times | Joined on Feb 2010
#13
to Kroll:
Yes, your solution can't help me now, but it useful to know.
I broke Hildon gambling in the services..

to Maacruz:
I made only a partition ext2 bootable, I think this is my mistake, so I must do two partition the first FAT32 bootable and the second Linux with the SO. It seems a bit illogical to make bootable the other partition, but probably is this the first viewed by the tablet.

I will try now.
Thanks!
 
Kroll is offline Kroll
2010-02-14 , 12:32
Posts: 637 | Thanked: 445 times | Joined on Dec 2009 @ Kaliningrad, Russia
#14
good luck!
 
Ilmanowar is offline Ilmanowar
2010-02-15 , 00:44
Posts: 48 | Thanked: 85 times | Joined on Feb 2010
#15
It doesn't work.. I made two partitions and I sit first the fat32 bootable and after the ext2 Probably I must do re-flashing ..
Thanks at all..
 
maacruz is offline maacruz
2010-02-15 , 08:51
Posts: 1,101 | Thanked: 1,184 times | Joined on Aug 2008 @ Spain
#16
Before giving up, try with another sd card, maybe the ITT isn't reading the actual one for some reason.
 
Reply
Page 2 of 2 1 2

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 18:53.

Contact Us - Home - Archive - Top