Active Topics

 


Reply
Thread Tools
Posts: 567 | Thanked: 2,965 times | Joined on Oct 2009
#541
You shouldn't be using apt-get upgrade or apt-get dist-upgrade on a N900 regardless.
 

The Following User Says Thank You to jonwil For This Useful Post:
Posts: 257 | Thanked: 1,010 times | Joined on May 2010 @ Near Munich
#542
@pali
Well you may be right, but quite obviously it currently is,
as the package I have linked resides right in the same repository, that is linked on the first page of this thread.

So symptoms:
-No charging indicator,
-battery always shows as empty or not calibrated
-when off and plugged in, charging indicator lights up for a few seconds, flashes green and goes off.
- (not entirely sure)

Workaround:
Control charge state with "bnf"
Remember to unplug before full charge.

Solution:
???

@jonwil:
I have heard this often, but how else should i upgrade all packages which aren't handled by the updater? For example certificate updates.
I usually glance over the packages and skip/hold ones which I am not sure off, or wait a few weeks. Also usually I can fix problems, but in this case I can't find an old version.
 

The Following User Says Thank You to Macros For This Useful Post:
Posts: 34 | Thanked: 26 times | Joined on May 2012
#543
@Macros

apt-get install libbmeipc0=0.8.55+0m5

also do not install clockd and libtime0 bacause this broke time sync with operator
 

The Following User Says Thank You to Brodyga For This Useful Post:
Posts: 3,074 | Thanked: 12,960 times | Joined on Mar 2010 @ Sofia,Bulgaria
#544
Originally Posted by Brodyga View Post
@Macros

also do not install clockd and libtime0 bacause this broke time sync with operator
hmm?

ten chars
__________________
Never fear. I is here.

720p video support on N900,SmartReflex on N900,Keyboard and mouse support on N900
Nothing is impossible - Stable thumb2 on n900

Community SSU developer
kernel-power developer and maintainer

 

The Following 3 Users Say Thank You to freemangordon For This Useful Post:
Posts: 2,154 | Thanked: 8,464 times | Joined on May 2010
#545
Originally Posted by jonwil View Post
profiled (looks like whats in Git isn't what's wanted for Maemo Fremantle or if it is I cant get it to upload properly)
It should work on Maemo Fremantle. If it does not build, then there is a build problem...
 

The Following 2 Users Say Thank You to pali For This Useful Post:
Posts: 141 | Thanked: 313 times | Joined on May 2012 @ Czech Republic
#546
I just uploaded new curl and libxml2 into cssu-devel (both 0cssu4). All of them include security fixes from wheezy (several CVEs each).
https://github.com/community-ssu/libxml2/commits/master
https://github.com/community-ssu/curl/commits/master

Please test it and report bugs.
 

The Following 8 Users Say Thank You to luf For This Useful Post:
Posts: 4 | Thanked: 34 times | Joined on Apr 2014
#548
may be just not knowing what im doing. followed the instructions here years ago https://wiki.maemo.org/Bluetooth_PAN

with the updated bluez, pan tethering to my watch quit working. other than that, seems to be working fine. any tips?

edit: well i guess i am an idiot. the patched maemo version works fine. i initially grabbed the cssu-devel version. didnt bother to check what i was running initially.

Last edited by tvall; 2018-01-31 at 22:31.
 

The Following 4 Users Say Thank You to tvall For This Useful Post:
Posts: 141 | Thanked: 313 times | Joined on May 2012 @ Czech Republic
#549
Originally Posted by tvall View Post
may be just not knowing what im doing. followed the instructions here years ago https://wiki.maemo.org/Bluetooth_PAN

with the updated bluez, pan tethering to my watch quit working. other than that, seems to be working fine. any tips?

edit: well i guess i am an idiot. the patched maemo version works fine. i initially grabbed the cssu-devel version. didnt bother to check what i was running initially.
You're right I forget to mention to check your version first and choose the correct version.

However the network part is working in 4.99 (just a little bit different way). If you want to test it you need to configure:
/etc/bluetooth/network.conf
#[General]
#Disable=Connection,Server
#DisableSecurity=true
#
#[NAP Role]
#Interface=nap1
#Script=
#
#[PANU Role]
#Interface=panu1
#Script=<path>
#
#[GN Role]
#Interface=gn1
#Script=<path>

Enable your role. Interface is the name of newly created bridge interface and Script is path to your script which can automagically setup the bridge (e.g. include you inet interface). You don't need iptables but you need bridge (KP 52 kernel).

Some info about it is in cssu irc logs (luf, kerio,Macer):
https://mg.pov.lt/mhttps://mg.pov.lt...11-11.log.html
http://logs.nslu2-linux.org/livelogs...o.20130714.txt
aemo-ssu-irclog/%23maemo-ssu.2012-11-11.log.html
http://logs.nslu2-linux.org/livelogs...o.20130714.txt

Unfortunately I was never able to write a wiki page about it
 

The Following 3 Users Say Thank You to luf For This Useful Post:
Maemish's Avatar
Posts: 1,718 | Thanked: 4,764 times | Joined on Apr 2018 @ Helsinki, Finland.
#550
I did it: apt-get upgrade. Eating my brains. Battery charging indicator not working, and appdownloader crashes before it really opens at all. Has anyone else had this problem with cssu appdownloader? Noticed that someone else had the battery problem and now I'm trying can it be calibrated. I installed offered libbmeipc0 and lets see if it helps on that. But that appdownloader crash worries a bit.
__________________
"I don't know how but I can try!" (active)

Master of not knowing (active)

For me it is possible to get lost in any case (active)

Learning to fall from high (DONE)

Learning to code with BASIC (WIP)
 
Reply

Tags
easter egg, lockslider


 
Forum Jump


All times are GMT. The time now is 08:34.