Page 1 of 2 1 2
Reply
Thread Tools
ZootHornRollo's Avatar
ZootHornRollo is offline ZootHornRollo
2010-06-08 , 21:21
Posts: 156 | Thanked: 26 times | Joined on Dec 2009 @ Scotland
#1
Hi,

I have been unable to mount my N900 from my UBuntu Lucid pc. Not sure if its happened with n900 update to 1.2 or ubuntu update to Lucid?

Basically i plug it in with USB, select Mass Storage but then nothing happens.

Alternatively i used to be able to connect to the N900 via Wifi but when i try to connect to server in Nautilus it get 'Host key verification failed'

So basically i have no way to transfer to/from my N900.

Any help appreciated
 
ZootHornRollo's Avatar
ZootHornRollo is offline ZootHornRollo
2010-06-08 , 21:22
Posts: 156 | Thanked: 26 times | Joined on Dec 2009 @ Scotland
#2
Code:
graham@Lodainn:~$ sudo fdisk -l

Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x41ab2316

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1        3187    25599546    7  HPFS/NTFS
/dev/sda2   *        3188        9561    51199124+   f  W95 Ext'd (LBA)
/dev/sda3            9562        9726     1325362+  82  Linux swap / Solaris
/dev/sda5            3188        5146    15727635   83  Linux
/dev/sda6            5146        9561    35471457   83  Linux

Disk /dev/sdb: 164.7 GB, 164696555520 bytes
255 heads, 63 sectors/track, 20023 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005cfe4

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1        3187    25599546    7  HPFS/NTFS
/dev/sdb2            3188       20023   135235170   83  Linux

Disk /dev/sdc: 29.0 GB, 28995223552 bytes
64 heads, 32 sectors/track, 27652 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
The N900 is detected but no partition is found?
 
ZootHornRollo's Avatar
ZootHornRollo is offline ZootHornRollo
2010-06-08 , 21:41
Posts: 156 | Thanked: 26 times | Joined on Dec 2009 @ Scotland
#3
i have a workaround but would love to get it fixed.

the workaround is:

Connect N900 to my other PC via USB and SSH into the other PC.
 
mr id is offline mr id
2010-06-08 , 21:59
Posts: 237 | Thanked: 193 times | Joined on Feb 2010 @ Brighton, UK
#4
assuming that you are comfortable setting up an ssh server on your n900 you could ssh directly from your first pc. for a slightly improved workaround at least.

are you 32 or 64bit lucid? what os is on your other pc? it sounds like lucid may be at fault here as you can mount the n900 elsewhere fine.
 
ZootHornRollo's Avatar
ZootHornRollo is offline ZootHornRollo
2010-06-08 , 22:08
Posts: 156 | Thanked: 26 times | Joined on Dec 2009 @ Scotland
#5
Originally Posted by mr id View Post
assuming that you are comfortable setting up an ssh server on your n900 you could ssh directly from your first pc. for a slightly improved workaround at least.

are you 32 or 64bit lucid? what os is on your other pc? it sounds like lucid may be at fault here as you can mount the n900 elsewhere fine.
sorry, should have said. Ubuntu Lucid also running on the other machine.

SSH already installed on N900... or it was before updatet o 1.2. WIll check again just now.
 
ZootHornRollo's Avatar
ZootHornRollo is offline ZootHornRollo
2010-06-08 , 22:21
Posts: 156 | Thanked: 26 times | Joined on Dec 2009 @ Scotland
#6
Aye. SSH still installed.

I tried deleting the .ssh/known_hosts file. That seems to have done the trick.

just need to fix the USB side now but i am thinking that is related to my installation of ubuntu given that it works fine on the other machine.

THanks
 
mr id is offline mr id
2010-06-08 , 22:24
Posts: 237 | Thanked: 193 times | Joined on Feb 2010 @ Brighton, UK
#7
good luck with that. it does sound like it's at the pc end.
 
woody14619's Avatar
woody14619 is offline woody14619
2010-06-08 , 22:36
Posts: 1,455 | Thanked: 3,309 times | Joined on Dec 2009 @ Rochester, NY
#8
This sounds silly, but... You may want to check the port... Could be some dirt or dust in the port causing communication issues. Did you try it on another port on the computer?
 

The Following User Says Thank You to woody14619 For This Useful Post:
xomm's Avatar
xomm is offline xomm
2010-06-09 , 03:42
Posts: 609 | Thanked: 243 times | Joined on Jan 2010 @ Eastern USA
#9
Confirmed working on Ubuntu Lucid (Studio) x64 on generic kernel here, if that helps at all.
__________________
==In school once again. Free time limited to night, holidays and weekends.==
Hi! I'm Andy, a Maemo Greeter! I'm also a moderator of the Applications, Nokia N900, and Maemo 5/Fremantle forums.
Useful Links: Maemo Wiki Main Page, New users start here, Beginners' wiki page, Maemo5 101, Frequently Asked Questions (FAQ)
 Also, pin yourself in the map! Maemo Map. Send me a PM (Private Message) if I leave you hanging on a problem (or if you need more help).
 Owner of both a N800 and N900; Active community member since Jan 2010. You've been xommified! - My blog.
 
phobosk is offline phobosk
2010-06-09 , 05:16
Posts: 37 | Thanked: 10 times | Joined on Mar 2010
#10
Probably right after you plug in your N900, a look at dmesg's last few lines and the syslog will give you a clue why it is not recognized properly and why its partitions are not recognized.
BTW maybe PC Connectivity app installed on N900 may have something to do with it too?
 
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 02:39.

Contact Us - Home - Archive - Top