Active Topics
-
TLS 1.2 for N9 is ready (29)
to MeeGo / Harmattan by smatkovi - 5 hrs, 12 mins ago -
Error after installing Leste on sdcard (12)
to Maemo 7 / Leste by teroyk - 5 hrs, 59 mins ago -
Camera phone competition March 2023 "Endless" (35)
to General by Maemish - 3 days, 14 hrs ago -
Maemo repository (3)
to Community by torsen - 4 days, 7 hrs ago -
Introducing ubiboot N9 (multiboot OS loader) (1,393)
to Alternatives by smatkovi - 6 days, 11 hrs ago - more...
 |
|
2010-03-14
, 02:17
|
|
Posts: 682 |
Thanked: 208 times |
Joined on Jan 2010
@ UK
|
#2
|
Yeh i had this problem with win7 XP mode, make sure you are connected to net, when you see "device not found" goto device manager and find the phone and update/install drivers, its a different set of drivers its normally installed with flasher.
I think mine autodownloaded "update mode drivers" i cannot fully remember but try it
I think mine autodownloaded "update mode drivers" i cannot fully remember but try it
__________________
n900 (UK) Global 3.2010.02.8
n900 (UK) Global 3.2010.02.8
|
|
2010-03-14
, 03:29
|
|
Posts: 5 |
Thanked: 0 times |
Joined on Mar 2010
|
#3
|
I tried that and I does not show or updates anything. The phone just keeps restarting. When I press the U it just gets stuck on the nokia logo with the USB on the right top corner.
Any other suggestions will be appreciate it.
Any other suggestions will be appreciate it.
|
|
2010-03-15
, 00:07
|
|
Posts: 5 |
Thanked: 0 times |
Joined on Mar 2010
|
#4
|
I seriously need your help guys.
Anybody?
Anybody?
|
|
2010-03-15
, 00:12
|
|
Posts: 1,746 |
Thanked: 2,100 times |
Joined on Sep 2009
|
#5
|
Try using the flasher to turn on --enable-rd-mode and see if it starts up.
If it does, open the xterminal and try to grab the output of "dmesg." Also, let the battery charge.
If it does, open the xterminal and try to grab the output of "dmesg." Also, let the battery charge.
|
|
2010-03-15
, 00:18
|
|
Posts: 170 |
Thanked: 75 times |
Joined on Jun 2008
@ NYC
|
#6
|
Originally Posted by vallejoricky
When I run flash via Linux, it sits waiting for a connection. I connect the phone (off) and press the power button. It then begins to flash the phone.
I need help. Yesterday when I woke up my n900 was off. I tried to turn it on and just the nokia logo appeared then the dots but only for one second the most. After that the phone does black then it shuts down. Everytime I turn it on this happens. I did everything possible. I am using windows XP 32-bit. I downloaded flasher 3.5. I did the enable-rd-mode. I did the disable-rd-mode...nothing happens. I downloaded the vanilla file nothing happens. My computer does recognize the phone but when I put this "flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R" the phone restarts and it says "device not found"
Please note. I spent more than 6 hours trying to figure this out but I need help.
I tried this:
You better connect phone to computer and then take out battery so power is gone. So while phone connected you press u on the phone and insert battery at the SAME time, now you should see the usb icon in upper right on your phone screen not with much light, you are now ready to run flash commands. Remember to save the two files for flashing (OS and eMMC vanilla content) in same folder as flasher tool. http://forums.internettablettalk.com...ad.php?t=35631
Flashing tool: http://tablets-dev.nokia.com/maemo-d...-downloads.php
OS and eMMC files: http://tablets-dev.nokia.com/nokia_N900.php
Start flasher and copy then paste in command:
flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
When done phone reboots amd locks again you flash OS with command:
flasher-3.5.exe -F RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin -f -R
and this:
http://wiki.maemo.org/Updating_the_tablet_firmware
this too:
http://discussions.nokiausa.com/t5/M...ing/m-p/593949
I would appreciate any help.
My guess is either your windows driver is screwed up, or your phone is. I hope it's windows. Good luck!
|
|
2010-03-15
, 00:47
|
|
Posts: 377 |
Thanked: 97 times |
Joined on Dec 2009
@ US
|
#7
|
Did you start the flasher app on your computer first, before you powered up the N900 and pressed the "U" key to get into flashing mode?
Try starting the flasher app first (it will tell you device not found, waiting for device - or some such thing), THEN power your N900 + U key, THEN plug it into your computer's USB port. If all goes well, flashed should pick up the N900 and start flashing it.
Try starting the flasher app first (it will tell you device not found, waiting for device - or some such thing), THEN power your N900 + U key, THEN plug it into your computer's USB port. If all goes well, flashed should pick up the N900 and start flashing it.
__________________
HNIC target-testing.com
HNIC target-testing.com
|
|
2010-03-15
, 06:39
|
|
Posts: 5 |
Thanked: 0 times |
Joined on Mar 2010
|
#8
|
Originally Posted by That One Guy
I start the flasher first. I do the enable mode and it works. I get the little tablet icond under Nokia logo. then I do the disable and it works. However it does not get fixed. I tried the vanilla file but when I do that it says that the device is not found. I will try it with linux. I just dont know what to download. I have ubuntu also but i cant install flasher. I have no idea what file to download. is it .exe file?
Did you start the flasher app on your computer first, before you powered up the N900 and pressed the "U" key to get into flashing mode?
Try starting the flasher app first (it will tell you device not found, waiting for device - or some such thing), THEN power your N900 + U key, THEN plug it into your computer's USB port. If all goes well, flashed should pick up the N900 and start flashing it.
|
|
2010-03-15
, 06:48
|
|
Posts: 5 |
Thanked: 0 times |
Joined on Mar 2010
|
#9
|
Originally Posted by Konceptz
I will try to do this in linux. I hope it works.
When I run flash via Linux, it sits waiting for a connection. I connect the phone (off) and press the power button. It then begins to flash the phone.
My guess is either your windows driver is screwed up, or your phone is. I hope it's windows. Good luck!
I will update
|
|
2010-03-15
, 07:10
|
|
Posts: 55 |
Thanked: 14 times |
Joined on Mar 2009
@ UK
|
#10
|
 |
| Tags |
| n900, not starting, rebooting, restarting |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 00:46.
Please note. I spent more than 6 hours trying to figure this out but I need help.
I tried this:
You better connect phone to computer and then take out battery so power is gone. So while phone connected you press u on the phone and insert battery at the SAME time, now you should see the usb icon in upper right on your phone screen not with much light, you are now ready to run flash commands. Remember to save the two files for flashing (OS and eMMC vanilla content) in same folder as flasher tool. http://forums.internettablettalk.com...ad.php?t=35631
Flashing tool: http://tablets-dev.nokia.com/maemo-d...-downloads.php
OS and eMMC files: http://tablets-dev.nokia.com/nokia_N900.php
Start flasher and copy then paste in command:
flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
When done phone reboots amd locks again you flash OS with command:
flasher-3.5.exe -F RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin -f -R
and this:
http://wiki.maemo.org/Updating_the_tablet_firmware
this too:
http://discussions.nokiausa.com/t5/M...ing/m-p/593949
I would appreciate any help.