Active Topics
-
Camera phone competition March 2023 "Endless" (35)
to General by Maemish - 2 days, 15 hrs ago -
TLS 1.2 for N9 is ready (28)
to MeeGo / Harmattan by smartblu9 - 2 days, 17 hrs ago -
Maemo repository (3)
to Community by torsen - 3 days, 8 hrs ago -
Error after installing Leste on sdcard (11)
to Maemo 7 / Leste by Maemish - 4 days, 6 hrs ago -
Introducing ubiboot N9 (multiboot OS loader) (1,393)
to Alternatives by smatkovi - 5 days, 12 hrs ago - more...
|
2010-03-08
, 08:18
|
|
Posts: 432 |
Thanked: 645 times |
Joined on Mar 2009
|
#2
|
Hi,
if you want to compile it for your device you simply have to run:
and then copy the binary over. There is as well a guide how to connect the device with you PC. If you want to compile for your host-machine afterwards run:
Then you can run the binary on your host system.
Daniel
if you want to compile it for your device you simply have to run:
Code:
mad qmake mad make
Code:
mad make clean qmake make
Daniel
|
|
2010-03-08
, 10:00
|
|
Posts: 24 |
Thanked: 12 times |
Joined on Mar 2010
|
#3
|
Hi Daniel,
I have run those commands, it is when I run mad make that I get the output as above.
Let me check if I have this right:
1. My output from Qt is basically just my source files - (a couple of .cpp files, a .h file, a .ui file and a .pro file) along with all the .o files and a couple of makefiles.
2. I have to create a skeleton project in my MADDE terminal using "mad pscreate -t qt_simple <projectname>
3. I copy my .cpp and .h files to the src directory in the newly created project (removing the created main.cpp and replacing with my own) and copy my .ui file to the uis directory
4. I open the created .pro file and edit it to include the names of my source, header and form (ui) files
5. I cd to the project directory and run mad qmake - works fine
6. run mad make - I get the output as below with an error at the end:
I'm not sure if I am doing the right thing with creating the skeleton project and putting my files into it, does that sound correct?
Thanks
I have run those commands, it is when I run mad make that I get the output as above.
Let me check if I have this right:
1. My output from Qt is basically just my source files - (a couple of .cpp files, a .h file, a .ui file and a .pro file) along with all the .o files and a couple of makefiles.
2. I have to create a skeleton project in my MADDE terminal using "mad pscreate -t qt_simple <projectname>
3. I copy my .cpp and .h files to the src directory in the newly created project (removing the created main.cpp and replacing with my own) and copy my .ui file to the uis directory
4. I open the created .pro file and edit it to include the names of my source, header and form (ui) files
5. I cd to the project directory and run mad qmake - works fine
6. run mad make - I get the output as below with an error at the end:
Code:
mark.mcdonnell $ mad make c:/MADDE/0.6.14/targets/fremantle-qt-0951/bin/uic uis/dialog.ui -o build/ui_dial og.h g++ -c -pipe -O0 -Wall -W -D_REENTRANT -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I ../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/share/qt4/mkspecs/ default -I. -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/incl ude/qt4/QtCore -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/i nclude/qt4/QtGui -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr /include/qt4 -Ibuild -Ibuild -o build/main.o src/main.cpp gcc -c -pipe -O0 -Wall -W -D_REENTRANT -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I ../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/share/qt4/mkspecs/ default -I. -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/incl ude/qt4/QtCore -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/i nclude/qt4/QtGui -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr /include/qt4 -Ibuild -Ibuild -o build/.o c:/ arm-none-linux-gnueabi-gcc.exe: c:/: linker input file unused because linking no t done g++ -c -pipe -O0 -Wall -W -D_REENTRANT -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I ../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/share/qt4/mkspecs/ default -I. -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/incl ude/qt4/QtCore -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/i nclude/qt4/QtGui -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr /include/qt4 -Ibuild -Ibuild -o build/dialog.o src/dialog.cpp C:/MADDE/0.6.14/targets/fremantle-qt-0951/bin/moc -DQT_GUI_LIB -DQT_CORE_LIB -DQ T_SHARED -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/share/q t4/mkspecs/default -I. -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt4 53/usr/include/qt4/QtCore -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1- qt453/usr/include/qt4/QtGui -I../../../sysroots/fremantle-arm-sysroot-2.2009-51- 1-qt453/usr/include/qt4 -Ibuild -Ibuild src/dialog.h -o build/moc_dialog.cpp g++ -c -pipe -O0 -Wall -W -D_REENTRANT -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I ../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/share/qt4/mkspecs/ default -I. -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/incl ude/qt4/QtCore -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/i nclude/qt4/QtGui -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr /include/qt4 -Ibuild -Ibuild -o build/moc_dialog.o build/moc_dialog.cpp g++ -o build/designerexample build/main.o build/.o build/dialog.o build/moc_dia log.o -LC:/MADDE/0.6.14/sysroots/fremantle-arm-sysroot-2.2009-51-1-qt453/usr/ lib -Wl,-rpath-link=/usr/lib -lQtGui -lQtCore -lpthread arm-none-linux-gnueabi-g++.exe: build/.o: No such file or directory make: *** [build/designerexample] Error 1
Thanks
|
|
2010-03-08
, 10:24
|
|
Posts: 62 |
Thanked: 97 times |
Joined on Dec 2009
@ Finland, Kerava
|
#4
|
Originally Posted by postformac
If you send your .pro file we might help. The whole source package
Hi Daniel,
I'm not sure if I am doing the right thing with creating the skeleton project and putting my files into it, does that sound correct?
Thanks
is even better.
|
|
2010-03-08
, 10:33
|
|
Posts: 24 |
Thanked: 12 times |
Joined on Mar 2010
|
#5
|
Ok, this is my complete MADDE project folder after trying unsuccessfully to run the mad make command.
Thanks
Thanks
 |
|
2010-03-08
, 13:42
|
|
Posts: 122 |
Thanked: 135 times |
Joined on Dec 2009
@ Helsinki
|
#6
|
Originally Posted by postformac
I took off the '\' in SOURCES line of qtprog.pro, re-entered
Ok, this is my complete MADDE project folder after trying unsuccessfully to run the mad make command.
Thanks
mad qmake and compilation succeeded.
| The Following 2 Users Say Thank You to too For This Useful Post: | ||
|
|
2010-03-08
, 13:49
|
|
Posts: 24 |
Thanked: 12 times |
Joined on Mar 2010
|
#7
|
Yes you're right, that works for me too. I thought I had to put a \ between listed files as that is what QtCreator has done in its project file, my mistake.
Thanks very much
Thanks very much
|
|
2010-03-08
, 14:43
|
|
Posts: 353 |
Thanked: 263 times |
Joined on Dec 2009
@ Finland
|
#8
|
You only need the \ if the list continues on the next line.
__________________
My Maemo5 projects:
mSpede - Speed testing game | Them Bloody Ducks - 2D duck hunting game | Maetronome - A simple metronome app | CuteMPC - MPD client
My Maemo5 projects:
mSpede - Speed testing game | Them Bloody Ducks - 2D duck hunting game | Maetronome - A simple metronome app | CuteMPC - MPD client
| The Following User Says Thank You to TNiga For This Useful Post: | ||
|
|
2010-03-08
, 14:46
|
|
Posts: 24 |
Thanked: 12 times |
Joined on Mar 2010
|
#9
|
Originally Posted by TNiga
Ok, thanks very much!
You only need the \ if the list continues on the next line.
I'm trying to learn to write apps for my N900, just for fun and personal interest really. My background is mainly embedded C programming and I have pretty much no experience of programming in Linux. I'm using a Windows PC for the work so initially tried the whole virtual machine method but have now switched to using MADDE and Qt which seems a lot simpler.
After following many of the useful guides and posts available here I have managed to write a simple app and run it on the device from within Qt (yay!) but I'm not sure where I need to go from there to get my app running directly on the device.
From reading I think I need to build my source code into a package using MADDE, is that correct? I am trying to do that following the "MADDE/Qt example" guide but I am a little confused on what to do exactly. I have created the skeleton project as described, put my source files into it and altered the .pro file to include my files but I get a lot of error messages when I try to make it so I'm obviously doing something wrong. This is the output I get:
g++ -c -pipe -O0 -Wall -W -I../../../sysroots/fremantle-arm-sysroot-2.2009-51-1 -qt453/usr/share/qt4/mkspecs/default -I. -Ibuild -o build/main.o src/main.cpp
src/main.cpp:1:30: error: QtGui/QApplication: No such file or directory
In file included from src/main.cpp:2:
src/dialog.h:4:23: error: QMainWindow: No such file or directory
In file included from src/main.cpp:2:
src/dialog.h:10: error: expected class-name before '{' token
src/dialog.h:11: error: ISO C++ forbids declaration of 'Q_OBJECT' with no type
src/dialog.h:12: error: expected ';' before 'public'
src/dialog.h:16: error: expected `:' before 'slots'
src/dialog.h:17: error: expected primary-expression before 'void'
src/dialog.h:17: error: ISO C++ forbids declaration of 'slots' with no type
src/dialog.h:17: error: expected ';' before 'void'
src/dialog.h:20: error: 'QEvent' has not been declared
src/main.cpp: In function 'int main(int, char**)':
src/main.cpp:6: error: 'QApplication' was not declared in this scope
src/main.cpp:6: error: expected `;' before 'a'
src/dialog.h:14: error: 'Dialog::~Dialog()' is private
src/main.cpp:7: error: within this context
src/main.cpp:11: error: 'class Dialog' has no member named 'show'
src/main.cpp:13: error: 'a' was not declared in this scope
src/main.cpp: At global scope:
src/main.cpp:4: warning: unused parameter 'argc'
src/main.cpp:4: warning: unused parameter 'argv'
make: *** [build/main.o] Error 1
Could someone please tell me firstly if this is the correct route to progress from running the app inside Qt and if so then what I may be doing wrong?
Thanks