Active Topics

 


Page 1 of 2 1 2
Reply
Thread Tools
VulcanRidr is offline VulcanRidr
2010-10-27 , 16:49
Posts: 473 | Thanked: 141 times | Joined on Jan 2009 @ Virginia, USA
#1
Okay, I got tired of the pink borders and things not working, soI flashed the OS onto my N900. This is the first time I have flashed this device (the PR 1.2 OTA worked as advertised).

So I followed the steps, powered off, held the 'u' connected to my Linux box, and did the flash

Code:
sudo ./flasher-3.5 -F RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin -f -R
The flash completed, and the N900 rebooted. It came up to the screen with the "KITT screen", the 5 dots with the light running between them. It has been in this state for about 45 minutes. Is this normal? Should I flash again? Flash EMMC and then OS? Just wait it out?

Thanks,
--vr
 
raaj13 is offline raaj13
2010-10-27 , 17:27
Posts: 404 | Thanked: 186 times | Joined on Oct 2010 @ Dehradun,India
#2
Originally Posted by VulcanRidr View Post
Okay, I got tired of the pink borders and things not working, soI flashed the OS onto my N900. This is the first time I have flashed this device (the PR 1.2 OTA worked as advertised).

So I followed the steps, powered off, held the 'u' connected to my Linux box, and did the flash

Code:
sudo ./flasher-3.5 -F RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin -f -R
The flash completed, and the N900 rebooted. It came up to the screen with the "KITT screen", the 5 dots with the light running between them. It has been in this state for about 45 minutes. Is this normal? Should I flash again? Flash EMMC and then OS? Just wait it out?

Thanks,
--vr
its not normal
u need to reflash i think.

never flash emmc before flashing rootfs.
device should not be rebooted between flashing rootfs and emmc
i.e. -R need to removed from end of the command


Code:
sudo ./flasher-3.5 -F RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin -f -R
follow the instructions given in wiki

http://wiki.maemo.org/Updating_the_tablet_firmware

hope that solves ur problem
 

The Following User Says Thank You to raaj13 For This Useful Post:
VulcanRidr is offline VulcanRidr
2010-10-27 , 17:56
Posts: 473 | Thanked: 141 times | Joined on Jan 2009 @ Virginia, USA
#3
Originally Posted by raaj13 View Post
its not normal
u need to reflash i think.

never flash emmc before flashing rootfs.
device should not be rebooted between flashing rootfs and emmc
i.e. -R need to removed from end of the command


Code:
sudo ./flasher-3.5 -F RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin -f -R
follow the instructions given in wiki

http://wiki.maemo.org/Updating_the_tablet_firmware

hope that solves ur problem
Ok, according to the page above, I should never have to reflash my emmc.

I flashed again, and it is doing the same thing (though only for 5 minutes so far). Suggestions?
 
egoshin is offline egoshin
2010-10-27 , 19:20
Posts: 992 | Thanked: 995 times | Joined on Dec 2009 @ California
#4
If you have 5-dots forever, it means that device doesn't pass phone lock check. It may happens because of failed CMT image in phone chip. But it also may be because of failed battery or faulty USB (which includes uSD and eMMC).

So, remove mSD first, then try to reflash an early version and then PR1.3. Finally, as last resort - reflash eMMC. And try it with/without SIM too!

EDIT: try to remove and reinsert battery too. Too much explanations but it may trigger a different software path in devlocker.

EDIT2: if that helps - please vote for bug https://bugs.maemo.org/show_bug.cgi?id=10998
Last edited by egoshin; 2010-10-27 at 19:44.
 

The Following User Says Thank You to egoshin For This Useful Post:
raaj13 is offline raaj13
2010-10-27 , 19:27
Posts: 404 | Thanked: 186 times | Joined on Oct 2010 @ Dehradun,India
#5
Originally Posted by VulcanRidr View Post
Ok, according to the page above, I should never have to reflash my emmc.

I flashed again, and it is doing the same thing (though only for 5 minutes so far). Suggestions?
i think now there is new emmc vanilla available ( pr1.3 )
try starting without mSD and then with/without sim as egoshin said if it doesnt solve ur problem try flashing both rootfs and emmc
Last edited by raaj13; 2010-10-27 at 19:29.
 

The Following User Says Thank You to raaj13 For This Useful Post:
VulcanRidr is offline VulcanRidr
2010-10-27 , 20:04
Posts: 473 | Thanked: 141 times | Joined on Jan 2009 @ Virginia, USA
#6
Originally Posted by egoshin View Post
If you have 5-dots forever, it means that device doesn't pass phone lock check. It may happens because of failed CMT image in phone chip. But it also may be because of failed battery or faulty USB (which includes uSD and eMMC).

So, remove mSD first, then try to reflash an early version and then PR1.3. Finally, as last resort - reflash eMMC. And try it with/without SIM too!
Thanks egoshin. I will reflash it again. I have pulled the mSD (which, as you probably suspect, I forgot).

Update: Flashed again, and it is still doing the same thing. Also note that I checked the md5sum for the .bin image and it checked fine. Headed out to get the eMMC for PR1.3, but as you can see below, it says CMT flashed successfully:

Code:
$ sudo flasher-3.5 -F RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin -f -R
flasher v2.5.2 (Oct 21 2009)

SW version in image: RX-51_2009SE_20.2010.36-2.002_PR_002
Image 'kernel', size 1705 kB
        Version 2.6.28-20103103+0m5
Image 'rootfs', size 185856 kB
        Version RX-51_2009SE_20.2010.36-2.002_PR_002
Image 'cmt-2nd', size 81408 bytes
        Version BB5_09.36
Image 'cmt-algo', size 519808 bytes
        Version BB5_09.36
Image 'cmt-mcusw', size 5826 kB
        Version rx51_ICPR82_10w08
Image '2nd', size 14720 bytes
        Valid for RX-51: 2217, 2218, 2219, 2220, 2120
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2217, 2218, 2219, 2220, 2120
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2217, 2218, 2219, 2220, 2120
        Version 1.4.14.9+0m5
Image '2nd', size 14720 bytes
        Valid for RX-51: 2101, 2102, 2103
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2101, 2102, 2103
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2101, 2102, 2103
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2307, 2308, 2309, 2310
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2307, 2308, 2309, 2310
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2307, 2308, 2309, 2310
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2407, 2408, 2409, 2410
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2407, 2408, 2409, 2410
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2407, 2408, 2409, 2410
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
        Version 1.4.14.9+0m5
Image '2nd', size 14720 bytes
        Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2607, 2608, 2609, 2610
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2607, 2608, 2609, 2610
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2607, 2608, 2609, 2610
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2507, 2508, 2509, 2510
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2507, 2508, 2509, 2510
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2507, 2508, 2509, 2510
        Version 1.4.14.9+0m5
Image '2nd', size 14720 bytes
        Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
        Version 1.4.14.9+0m5
Suitable USB device not found, waiting.
USB device found found at bus 001, device address 010.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2.002_PR_002
Sending xloader image (14 kB)...
100% (14 of 14 kB, avg. 852 kB/s)
Sending secondary image (106 kB)...
100% (106 of 106 kB, avg. 9715 kB/s)
Flashing bootloader... done.
Sending cmt-2nd image (79 kB)...
100% (79 of 79 kB, avg. 8833 kB/s)
Sending cmt-algo image (507 kB)...
100% (507 of 507 kB, avg. 20305 kB/s)
Sending cmt-mcusw image (5826 kB)...
100% (5826 of 5826 kB, avg. 25333 kB/s)
Flashing cmt-mcusw... done.
Sending kernel image (1705 kB)...
100% (1705 of 1705 kB, avg. 26652 kB/s)
Flashing kernel... done.
Sending and flashing rootfs image (185856 kB)...
100% (185856 of 185856 kB, avg. 14351 kB/s)
Finishing flashing... done
CMT flashed successfully
 
VulcanRidr is offline VulcanRidr
2010-10-27 , 21:53
Posts: 473 | Thanked: 141 times | Joined on Jan 2009 @ Virginia, USA
#7
Originally Posted by raaj13 View Post
i think now there is new emmc vanilla available ( pr1.3 )
try starting without mSD and then with/without sim as egoshin said if it doesnt solve ur problem try flashing both rootfs and emmc
I tried with and without the sim card. Same deal...

The version of the eMMC that I found on the site was RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin, which was the same one that I downloaded back in July when I bought the device.

Here goes nothing...Again.

Update: It worked! I had to nuke and pave the eMMC, but I'm back and should have good backups of the configs and /home/user. Then its a matter of getting the apps installed again. Probably a much slimmer list this time though.

Thanks to all who were available to help!

--vr
Last edited by VulcanRidr; 2010-10-27 at 22:09.
 
egoshin is offline egoshin
2010-10-27 , 23:00
Posts: 992 | Thanked: 995 times | Joined on Dec 2009 @ California
#8
Originally Posted by VulcanRidr View Post
Thanks egoshin. I will reflash it again. I have pulled the mSD (which, as you probably suspect, I forgot).

Update: Flashed again, and it is still doing the same thing. Also note that I checked the md5sum for the .bin image and it checked fine. Headed out to get the eMMC for PR1.3, but as you can see below, it says CMT flashed successfully:
This is an OLD content of CMT - the same as PR1.2.
The reason why it is in PR1.3 image because it should include everything

Glad to see you resolve an issue.
 
VulcanRidr is offline VulcanRidr
2010-10-28 , 02:45
Posts: 473 | Thanked: 141 times | Joined on Jan 2009 @ Virginia, USA
#9
Originally Posted by egoshin View Post
This is an OLD content of CMT - the same as PR1.2.
The reason why it is in PR1.3 image because it should include everything

Glad to see you resolve an issue.
Does this mean that I should reflash PR1.3 again to get the new stuff? I haven't installed anything, my N900 and my wireless access point are not yet on speaking terms. I haven't had time to see which is at fault...

--vr
 
F2thaK's Avatar
F2thaK is offline F2thaK
2010-10-28 , 03:14
Posts: 4,365 | Thanked: 2,467 times | Joined on Jan 2010 @ Australia Mate
#10
There isnt a Pr1.3 EMMC
__________________
N9 / N900 Youtube Videos

N9 "Faster, Darker, Better" Theme Pack
---
www.F2thaK.com
 

The Following User Says Thank You to F2thaK For This Useful Post:
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 11:52.

Contact Us - Home - Archive - Top