Page 1 of 2 1 2
Reply
Thread Tools
speedonwilliam is offline speedonwilliam
2012-10-11 , 17:48
Posts: 16 | Thanked: 7 times | Joined on Oct 2012
#1
after flashing the rootfs, i removed the battery with the cable still plugged 2 the system, when i inserted the battery, the charging light started blinking. i flashed the fiasco anyway but witout d -R, then i removed the battery again and tried 2 boot but the white led just comes on, the nokia logo....then the phone switches off. could it be bcos i removed the battery before 1st boot? i tried flashing again but it cant boot into flash mode. it says "booting into flash mode" "usb not found waiting" pls i would appreciate ur help
 
biketool is offline biketool
2012-10-11 , 18:06
Posts: 1,431 | Thanked: 2,630 times | Joined on Jan 2011 @ Touring
#2
Yea, I ended up there too,
I used the bricked phone for my Palm Touchstone inductive charging mod tests.
Maybe someone at Nokia knows a trick to jtag the board or something but nobody here ever came up with an answer when you bootloop without the phone going into a flashable state.
dump the
sudo tail -f /var/log/messages
or
sudo tail -f /var/log/syslog (newer Ubuntu)

from your computer and we can see what is happening with your USB
Last edited by biketool; 2012-10-11 at 18:10.
 
reinob is offline reinob
2012-10-12 , 08:14
Posts: 1,808 | Thanked: 4,272 times | Joined on Feb 2011 @ Germany
#3
Originally Posted by speedonwilliam View Post
after flashing the rootfs
i flashed the fiasco anyway but witout d -R
You seem to imply that there's a difference between rootfs and fiasco image (did you also flash the combined image? .

Have you read the relevant Wiki page about flashing?

If not, please do so. Then try again and post here exactly what you do and what you see on the screen.
 
speedonwilliam is offline speedonwilliam
2012-10-13 , 22:32
Posts: 16 | Thanked: 7 times | Joined on Oct 2012
#4
Sori bout d mixup....i flashd d emmc A.K.A vanilla, then d rootfs A.K.A that is the combined. I'v done it b4 sucessfully but dis time, i guess i wasnt careful...now it only shows d nokia logo with d white led, den switches off...what am i gonna do?
 
speedonwilliam is offline speedonwilliam
2012-10-13 , 22:42
Posts: 16 | Thanked: 7 times | Joined on Oct 2012
#5
Originally Posted by biketool View Post
Yea, I ended up there too,
I used the bricked phone for my Palm Touchstone inductive charging mod tests.
Maybe someone at Nokia knows a trick to jtag the board or something but nobody here ever came up with an answer when you bootloop without the phone going into a flashable state.
dump the
sudo tail -f /var/log/messages
or
sudo tail -f /var/log/syslog (newer Ubuntu)

from your computer and we can see what is happening with your USB
dnt understand...I'm not reali an expert so i tink u shuld break it down a lil bit
 
misterc's Avatar
misterc is offline misterc
2012-10-14 , 00:13
Posts: 1,625 | Thanked: 998 times | Joined on Aug 2010
#6
Originally Posted by speedonwilliam View Post
dnt understand...I'm not reali an expert so i tink u shuld break it down a lil bit
take the battery out for a few hours (obviously without the charger or any other cable in the USB )
after a few hours, put the battery back in and make a vanilla flash according to instructions on wiki
__________________
information is a necessary though no sufficient condition to rationality...
 
speedonwilliam is offline speedonwilliam
2012-10-15 , 20:55
Posts: 16 | Thanked: 7 times | Joined on Oct 2012
#7
Originally Posted by misterc View Post
take the battery out for a few hours (obviously without the charger or any other cable in the USB )
after a few hours, put the battery back in and make a vanilla flash according to instructions on wiki
I took out d battery for days *just 2 b sure* but it stil isnt flashing...
Stil sayin 'booting into flash mode'....den d orange led comes up and remains dat way.....culd it b bcos a driver failed 2 install or wot?
 
speedonwilliam is offline speedonwilliam
2013-01-08 , 17:58
Posts: 16 | Thanked: 7 times | Joined on Oct 2012
#8
after so many months of research, i found out my bootloader may b corrupt so i decided to cold flash...yet it fails. is dere any1 who is knowledgeable enough to solve my problem?
 
mr_pingu is offline mr_pingu
2013-01-08 , 18:16
Posts: 1,163 | Thanked: 1,873 times | Joined on Feb 2011 @ The Netherlands
#9
IRC:
#maemo @freenode
__________________
N900 loaded with:
CSSU-T (Thumb)
720p recording,
Pierogi, Lanterne, Cooktimer, Frogatto
N9 16GB loaded with:
Kernel-Plus
--
[TCPdump & libpcap | ngrep]
--
donate
 
Vader is offline Vader
2013-01-08 , 18:39
Posts: 15 | Thanked: 2 times | Joined on Dec 2012
#10
Install Flasher 3.5
Download libusb-win32-bin-1.2.2.0.zip - http://sourceforge.net/projects/libusb-win32/
Press U while starting N900 and attach USB
Wait for the original driver to install.
Run inf-wizard.exe (bin folder in zip) - Run as Administrator

Press "Next"
Search in list and select "0x0421 - 0x0105 - Nokia N900 (Update Mode)"
Press "Next"
Press "Next"
Save .inf file
Press "Install Now"
Press "Install this driver software anyway" on warning message.
You should get "Installation successful." and press OK.

Check Windows Device Manager for "libusb-win32 devices", expand and verify "Nokia N900 (Update Mode)" can be found.
Now you are ready to run Flasher 3.5 with your parameters. every time u fail u must load lib-usb again !

IF THIS FAILS ! : figure out somehow ( pull patery, insert whit preset button and cable) PC or lib-usb must detect n900 so you need download few drivers and if u will fail ENABLE RD mode in your flasher by comand : ./flasher.exe --enable-rd-mode and do it all again
u wellcome !
Last edited by Vader; 2013-01-08 at 21:32.
 
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 06:53.

Contact Us - Home - Archive - Top