Active Topics
-
Maemo repository (4)
to Community by teroyk - 0 mins ago -
Error after installing Leste on sdcard (13)
to Maemo 7 / Leste by Maemish - 1 day, 6 hrs ago -
TLS 1.2 for N9 is ready (29)
to MeeGo / Harmattan by smatkovi - 1 day, 15 hrs ago -
Camera phone competition March 2023 "Endless" (35)
to General by Maemish - 5 days ago - more...
|
2014-10-28
, 16:01
|
|
Community Council |
Posts: 4,920 |
Thanked: 12,867 times |
Joined on May 2012
@ Southerrn Finland
|
#2
|
Unfortunately I cannot see the picure correct, the link goes to some horrible page that has pop-up adverts that go in the front of the picture! 
However, I understand that you want to create an application that you can send signals to one or more Raspberry PI's?
Is the connection to be via WLAN? And the application cover actions (swipe left/swipe right) are to activate the commands?
However, I understand that you want to create an application that you can send signals to one or more Raspberry PI's?
Is the connection to be via WLAN? And the application cover actions (swipe left/swipe right) are to activate the commands?
|
|
2014-10-28
, 16:59
|
|
Posts: 738 |
Thanked: 819 times |
Joined on Jan 2012
@ Berlin
|
#3
|
Ok i will never use tinypic page. Hope this is now better.
Yes i want send signals to one Raspberry pi over Wlan and or 3G (DynDNS) but Dyndns is not importend
both or other commands needs ssh connection to kill some prozedur or reboot/start somthing other things.
And yes swipe from cover action/page will send the commands eg "killall ambi-tv" or "reboot" to restart the pi.
this is my first wish
I use my Raspberry Pi for Ambilight (TV). It use Ambi-TV and Hyperion. Hyperion needs to change a spezific color
Ambi-TV is for Ambilight effect like Philips TVs. The thing is, i dont want to have only Ambilight, this is why i need the command "killall ambi-tv", than i can open the Android app "Hyperion" and can change the color to white or what ever. A Sailfish App for this is welcome
The Hyperion App is not connected over SSH... it use PORT: 19444
sorry for my english, but i hope you understand my wishes
Yes i want send signals to one Raspberry pi over Wlan and or 3G (DynDNS) but Dyndns is not importend
both or other commands needs ssh connection to kill some prozedur or reboot/start somthing other things.
And yes swipe from cover action/page will send the commands eg "killall ambi-tv" or "reboot" to restart the pi.
this is my first wish
I use my Raspberry Pi for Ambilight (TV). It use Ambi-TV and Hyperion. Hyperion needs to change a spezific color
Ambi-TV is for Ambilight effect like Philips TVs. The thing is, i dont want to have only Ambilight, this is why i need the command "killall ambi-tv", than i can open the Android app "Hyperion" and can change the color to white or what ever. A Sailfish App for this is welcome
The Hyperion App is not connected over SSH... it use PORT: 19444
sorry for my english, but i hope you understand my wishes
__________________
www.sailfishmods.de
|
|
2014-10-28
, 17:09
|
|
Community Council |
Posts: 4,920 |
Thanked: 12,867 times |
Joined on May 2012
@ Southerrn Finland
|
#4
|
Okay, I had to google ambilight and hyperion, having never heard about those?
So now I understand, you have a raspberry that is controlling a strip of RGB leds behind television, and there are 2 different programs it can run, ambilight which will change the light based on the television program, and hyperion which can show a single programmed colour, right?
Also there's some android thing to set up those programs?
Now I wonder, if you want to use those both, why not create a single application on the raspberry that can do both, then you'd not need any killing-of-applications, just command it to be in mode A or mode H (or whatever you'd call it)
Also, you'd need no android to setup the colour, that could be done via the same Sailfish application.
So now I understand, you have a raspberry that is controlling a strip of RGB leds behind television, and there are 2 different programs it can run, ambilight which will change the light based on the television program, and hyperion which can show a single programmed colour, right?
Also there's some android thing to set up those programs?
Now I wonder, if you want to use those both, why not create a single application on the raspberry that can do both, then you'd not need any killing-of-applications, just command it to be in mode A or mode H (or whatever you'd call it
)Also, you'd need no android to setup the colour, that could be done via the same Sailfish application.
|
|
2014-10-28
, 17:22
|
|
Posts: 738 |
Thanked: 819 times |
Joined on Jan 2012
@ Berlin
|
#5
|
Super better than you I could not explain it
It would be nice to have both in one program, if that is possible.
Only you have to kill Ambi-TV to utilize the Hyperion!
There are two connection required.
1) to stop Ambi-TV and/or reboot RPi (via SSH)
2) to control Hyperion, Port: 19444
But as I said. My programming skills are from 0.
That's why I'm looking for someone who can help me there.
It would be nice to have both in one program, if that is possible.
Only you have to kill Ambi-TV to utilize the Hyperion!
There are two connection required.
1) to stop Ambi-TV and/or reboot RPi (via SSH)
2) to control Hyperion, Port: 19444
But as I said. My programming skills are from 0.
That's why I'm looking for someone who can help me there.
__________________
www.sailfishmods.de
 |
|
2014-10-28
, 17:25
|
|
Posts: 889 |
Thanked: 2,087 times |
Joined on Sep 2010
@ Manchester
|
#6
|
If you look up how to do key-based authentication for ssh (eg [1]), it's not too difficult to then create an icon that executes the command
This would work over WLAN, and needs your pi to have a fixed ip address (probably easiest to do in your router)
If you want to then start an Android app, you could put all this into a script.
[1] http://docs.fedoraproject.org/en-US/...-keypairs.html
Code:
ssh pi@piaddress -t 'command'
If you want to then start an Android app, you could put all this into a script.
[1] http://docs.fedoraproject.org/en-US/...-keypairs.html
|
|
2014-10-28
, 17:34
|
|
Posts: 84 |
Thanked: 79 times |
Joined on Dec 2013
|
#7
|
OneSSHot could also be useful for this.
|
|
2014-10-28
, 17:35
|
|
Community Council |
Posts: 4,920 |
Thanked: 12,867 times |
Joined on May 2012
@ Southerrn Finland
|
#8
|
Well yes, doing what you require is fairly easy. You can invoke a ssh command to the target raspberry from QML easily. I think the default "empty" SDK project even has enough functionality to build this, with adding just a SshConnection class 
If you want to combine the functionality in raspberry, that requires some programming in the PI end. I am not sure about how those applications are done, but they might even be running in python or javascript, in which case the modification would be pretty easy
If the sources are not available, then it is more difficult as the application would be needed to be done from scratch.
If you want to combine the functionality in raspberry, that requires some programming in the PI end. I am not sure about how those applications are done, but they might even be running in python or javascript, in which case the modification would be pretty easy
If the sources are not available, then it is more difficult as the application would be needed to be done from scratch.
|
|
2014-10-28
, 17:45
|
|
Posts: 738 |
Thanked: 819 times |
Joined on Jan 2012
@ Berlin
|
#9
|
if its help:
https://github.com/poljvd/hyperion-webapp
@mrsellout
i fix all ip adress from device in my router. I hate it if its change
I think a password is required to connect to the RPi for the command line
Last edited by cvp; 2014-10-28 at 17:48.
https://github.com/poljvd/hyperion-webapp
@mrsellout
i fix all ip adress from device in my router. I hate it if its change
I think a password is required to connect to the RPi for the command line
__________________
www.sailfishmods.de
Last edited by cvp; 2014-10-28 at 17:48.
|
|
2014-10-28
, 17:47
|
|
Community Council |
Posts: 4,920 |
Thanked: 12,867 times |
Joined on May 2012
@ Southerrn Finland
|
#10
|
Originally Posted by cvp
Yes, it's all javascript, very easy to modify
if its help:
https://github.com/poljvd/hyperion-webapp
I am change now my Raspberry Pi Amilight system from Hyperion+Ambi-TV to ONLY Hyperion!
Now i wish me only a port from the Hyperion (web) App to Sailfish.
Source:
https://github.com/Gamadril/hyperion-remote
is it usefull for someone?
OLD WISH
Last edited by cvp; 2014-12-28 at 19:09.