Active Topics
-
Maemo repository (8)
to Community by Maemish - 1 day, 16 hrs ago -
Porting apps to Leste (44)
to Maemo 7 / Leste by norayr - 1 day, 21 hrs ago -
List of well performing apps on Leste (35)
to Maemo 7 / Leste by smatkovi - 4 days, 18 hrs ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (13)
to SailfishOS by edp17 - 5 days, 16 hrs ago -
Sailfish OS for the Samsung Galaxy Note 4 (SM-N910C) - (treltexx) (79)
to SailfishOS by edp17 - 5 days, 16 hrs ago -
U-Boot for Nokia RX-51 with BootMenu (updated version 2012.10-rc3-1) (843)
to Alternatives by Arno_11 - 5 days, 22 hrs ago - more...
 |
|
2011-02-02
, 07:59
|
|
Posts: 601 |
Thanked: 549 times |
Joined on Mar 2010
@ Redditch, UK
|
#2
|
I have erased everything not essential to the OS from mine whilst uninstalling NITDroid (cock up on my part) but it certainly didn't boot up like that - I did have the grey background but where text should be there were nothing but boxes, but I was able to flash both Fiasco and eMMC successfully.....
|
|
2011-02-02
, 08:19
|
|
Posts: 19 |
Thanked: 19 times |
Joined on Dec 2009
@ Finland
|
#3
|
How long does the flashing of the rootFS usually last?
 |
|
2011-02-02
, 08:43
|
|
Posts: 168 |
Thanked: 58 times |
Joined on May 2010
@ Madrid
|
#4
|
The same thing that happened to me . The best you can do is reflash both eMMC and firmware (in the correct order) and make sure that you flash the lastest eMMC and the lastest firmware (pr 1.3) this work for me =)
|
|
2011-02-02
, 08:49
|
|
Posts: 19 |
Thanked: 19 times |
Joined on Dec 2009
@ Finland
|
#5
|
Thanks I'll try once more
|
|
2011-02-02
, 09:03
|
|
Posts: 601 |
Thanked: 549 times |
Joined on Mar 2010
@ Redditch, UK
|
#6
|
Flashing the rootfs takes about 30 - 40 seconds, the longest part being erasing the CMT. You should be able to watch this go up percentage wise within the DOS prompt window on the XP machine.
Writing eMMC is a lot quicker. From what I can recall it doesn't particularly matter which way you flashthe images, just make sure you don't have the -R switch at the end of the first flash as this will reboot the device and that's when it goes tits up.
Writing eMMC is a lot quicker. From what I can recall it doesn't particularly matter which way you flashthe images, just make sure you don't have the -R switch at the end of the first flash as this will reboot the device and that's when it goes tits up.
|
|
2011-02-02
, 09:58
|
|
Posts: 19 |
Thanked: 19 times |
Joined on Dec 2009
@ Finland
|
#7
|
Does the usb-image in the corner of the N900 disappear normally while flashing?
|
|
2011-02-02
, 10:02
|
|
Posts: 96 |
Thanked: 15 times |
Joined on Oct 2010
|
#8
|
Originally Posted by maakoi
Hi!
I have tried several times to reinstall the eMMC and FIASCO images. It boots up without the dots and starts up in some win3.11 style grey graphics mode with no understandable characters, only boxes.
I have followed the instructions found on the wiki, using ubuntu and XP, and trying different usb-ports.
Has anyone experienced this?
I also tried to flash an older image, but it didn't help.
I noticed two things:
1. that flashing the rootfs takes only 0.1s.
2. With XP, the usb-image in the corner of the N900 disappeares after the flasher says: "Booting into flashing mode, no suitable usb-device found". It doesn't appear any more while flashing.
Here's some images and the WinXP shell output:
Code:Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2. VANILLA_PR_EMMC_MR0_ARM.bin -f flasher v2.5.2 (Sep 24 2009) Image 'mmc', size 255947 kB Version RX-51_2009SE_10.2010.13-2.VANILLA Suitable USB device not found, waiting. USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0 105. Found device RX-51, hardware revision 2101 NOLO version 1.4.14 Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0 Booting device into flash mode. Suitable USB device not found, waiting. USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0 1c8. Raw data transfer EP found at EP2. Image(s) flashed successfully in 29.187 s (8769 kB/s)! C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_20.2010.36-2_ PR_COMBINED_MR0_ARM.bin -f -R flasher v2.5.2 (Sep 24 2009) SW version in image: RX-51_2009SE_20.2010.36-2_PR_MR0 Image 'kernel', size 1705 kB Version 2.6.28-20103103+0m5 Image 'rootfs', size 185728 kB Version RX-51_2009SE_20.2010.36-2_PR_MR0 Image 'cmt-2nd', size 81408 bytes Version BB5_09.36 Image 'cmt-algo', size 519808 bytes Version BB5_09.36 Image 'cmt-mcusw', size 5826 kB Version rx51_ICPR82_10w08 Image '2nd', size 14720 bytes Valid for RX-51: 2217, 2218, 2219, 2220, 2120 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2217, 2218, 2219, 2220, 2120 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2217, 2218, 2219, 2220, 2120 Version 1.4.14.9+0m5 Image '2nd', size 14720 bytes Valid for RX-51: 2101, 2102, 2103 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2101, 2102, 2103 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2101, 2102, 2103 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2307, 2308, 2309, 2310 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2307, 2308, 2309, 2310 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2307, 2308, 2309, 2310 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2407, 2408, 2409, 2410 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2407, 2408, 2409, 2410 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2407, 2408, 2409, 2410 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406 Version 1.4.14.9+0m5 Image '2nd', size 14720 bytes Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2 113, 2114, 2115, 2116, 2117, 2118, 2119 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2 113, 2114, 2115, 2116, 2117, 2118, 2119 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2 113, 2114, 2115, 2116, 2117, 2118, 2119 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2607, 2608, 2609, 2610 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2607, 2608, 2609, 2610 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2607, 2608, 2609, 2610 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2507, 2508, 2509, 2510 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2507, 2508, 2509, 2510 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2507, 2508, 2509, 2510 Version 1.4.14.9+0m5 Image '2nd', size 14720 bytes Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2 210, 2211, 2212, 2213, 2214, 2215, 2216 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2 210, 2211, 2212, 2213, 2214, 2215, 2216 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2 210, 2211, 2212, 2213, 2214, 2215, 2216 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606 Version 1.4.14.9+0m5 USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0 1c8. Raw data transfer EP found at EP2. Using flashing protocol Mk II. C:\Program Files\maemo\flasher-3.5>
Please check the sequence of flashing as i was also doing wrong and getting same type of display
First flash EMMC with the EMMC image and then with the FIRMWARE
it worked for me hope this works for u too. GOOD LUCk
|
|
2011-02-02
, 10:03
|
|
Posts: 601 |
Thanked: 549 times |
Joined on Mar 2010
@ Redditch, UK
|
#9
|
Not sure mate, while flashing what, fiasco or eMMC? I'll flash and find out for you if it helps.
|
|
2011-02-02
, 10:12
|
|
Posts: 19 |
Thanked: 19 times |
Joined on Dec 2009
@ Finland
|
#10
|
Now it's working!
1. I flashed the eMMC
2. Then I flashed(tried to) the rootFS with -R at the end. It finnished again in 0.1s.
3. When it started to reboot, i started flashing the rootFS again
It worked! Now I saw the progress and the "Erasing CMT" -stuff.
I did flash the eMMC first every time...
Thanks a lot!
Last edited by maakoi; 2011-02-02 at 10:27.
1. I flashed the eMMC
2. Then I flashed(tried to) the rootFS with -R at the end. It finnished again in 0.1s.
3. When it started to reboot, i started flashing the rootFS again
It worked! Now I saw the progress and the "Erasing CMT" -stuff.
I did flash the eMMC first every time...
Thanks a lot!
Last edited by maakoi; 2011-02-02 at 10:27.
I have tried several times to reinstall the eMMC and FIASCO images. It boots up without the dots and starts up in some win3.11 style grey graphics mode with no understandable characters, only boxes.
I have followed the instructions found on the wiki, using ubuntu and XP, and trying different usb-ports.
Has anyone experienced this?
I also tried to flash an older image, but it didn't help.
I noticed two things:
1. that flashing the rootfs takes only 0.1s.
2. With XP, the usb-image in the corner of the N900 disappeares after the flasher says: "Booting into flashing mode, no suitable usb-device found". It doesn't appear any more while flashing.
Here's some images and the WinXP shell output:
Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2. VANILLA_PR_EMMC_MR0_ARM.bin -f flasher v2.5.2 (Sep 24 2009) Image 'mmc', size 255947 kB Version RX-51_2009SE_10.2010.13-2.VANILLA Suitable USB device not found, waiting. USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0 105. Found device RX-51, hardware revision 2101 NOLO version 1.4.14 Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0 Booting device into flash mode. Suitable USB device not found, waiting. USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0 1c8. Raw data transfer EP found at EP2. Image(s) flashed successfully in 29.187 s (8769 kB/s)! C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_20.2010.36-2_ PR_COMBINED_MR0_ARM.bin -f -R flasher v2.5.2 (Sep 24 2009) SW version in image: RX-51_2009SE_20.2010.36-2_PR_MR0 Image 'kernel', size 1705 kB Version 2.6.28-20103103+0m5 Image 'rootfs', size 185728 kB Version RX-51_2009SE_20.2010.36-2_PR_MR0 Image 'cmt-2nd', size 81408 bytes Version BB5_09.36 Image 'cmt-algo', size 519808 bytes Version BB5_09.36 Image 'cmt-mcusw', size 5826 kB Version rx51_ICPR82_10w08 Image '2nd', size 14720 bytes Valid for RX-51: 2217, 2218, 2219, 2220, 2120 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2217, 2218, 2219, 2220, 2120 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2217, 2218, 2219, 2220, 2120 Version 1.4.14.9+0m5 Image '2nd', size 14720 bytes Valid for RX-51: 2101, 2102, 2103 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2101, 2102, 2103 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2101, 2102, 2103 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2307, 2308, 2309, 2310 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2307, 2308, 2309, 2310 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2307, 2308, 2309, 2310 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2407, 2408, 2409, 2410 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2407, 2408, 2409, 2410 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2407, 2408, 2409, 2410 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406 Version 1.4.14.9+0m5 Image '2nd', size 14720 bytes Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2 113, 2114, 2115, 2116, 2117, 2118, 2119 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2 113, 2114, 2115, 2116, 2117, 2118, 2119 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2 113, 2114, 2115, 2116, 2117, 2118, 2119 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2607, 2608, 2609, 2610 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2607, 2608, 2609, 2610 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2607, 2608, 2609, 2610 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2507, 2508, 2509, 2510 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2507, 2508, 2509, 2510 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2507, 2508, 2509, 2510 Version 1.4.14.9+0m5 Image '2nd', size 14720 bytes Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2 210, 2211, 2212, 2213, 2214, 2215, 2216 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2 210, 2211, 2212, 2213, 2214, 2215, 2216 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2 210, 2211, 2212, 2213, 2214, 2215, 2216 Version 1.4.14.9+0m5 Image '2nd', size 14848 bytes Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606 Version 1.4.14.9+0m5 Image 'xloader', size 14848 bytes Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606 Version 1.4.14.9+0m5 Image 'secondary', size 109440 bytes Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606 Version 1.4.14.9+0m5 USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0 1c8. Raw data transfer EP found at EP2. Using flashing protocol Mk II. C:\Program Files\maemo\flasher-3.5>Last edited by maakoi; 2011-02-02 at 10:17.