Help I am having some problems with my N900

I followed an online tuturial for trying to re-set my phone to factory default setting and now it is completley unusable.

I followed this tutorial:
http://thenokiaguide.com/2010/01/11/.../#comment-3941

now my phone wont load with an operating system. Instead I get 2 pink squares floating on a black background without any text or way to use the phone.

I have tried re-installing flasher and starting from scratch, but now every time that I copy the 2 OS and eMMc files into the flasher directory the flasher software boots and ends seconds after loading it and you can not enter commands into it.

Can someone out there please help as my phone is now unusable.

http://wiki.maemo.org/Updating_the_tablet_firmware

Here is the complete wiki article about flashing of firmwares. If you are in a reboot loop, try to take out the battery and restart it after a couple of seconds.
Please give complete error messages for further help. What version of windows are you using?

Did you follow this basic step?
1. Power off the device
2. Connect Usb cable to computer.
3. While holding the U key on N900 querry keyboard, connect your N900 to the cable and wait until the Nokia sceen come up with a little usb icon on top right of the screen and release the key.
4. Now using flasher to flash your emmc bin file first and make sure don't use the -R which reboot the phone.
5. after done, remove n900 from the cable and remove the battery and put it back in then follow just step 3 above.
6. Now use flasher to flash N900 OS bin with -R to reboot the phone after it's done.

I NEED HELP.. please help me.. yesterday I played with my n900 and was into the filebox app and then i happened deleted some dictionaries and today when i reboot the n900 it didnt work normal... and i tried to hard reset it which i have did it manny times.
I tried to flash firmware and it worked but when i tried to flash MMC it didnt work..
I tried a lot of times to flash both firmware and MMC, but MMC doesnt reflash... i found out that when i try to flash MMC and when I press enter to start flashing, the usb logo dissappears on the n900 screen and that happens everytime i try to flash the MMC.. can you tell me what the problem could be please I need help please..

wow what a maemo community.. no1 is there to help me.. WTF!?

In the wiki there is nothing about step 5 (remove battery). Is that necessary?

Thanks for your help loser maemo community!! I really didnt expect you to ignore someone whos into a big problem and need your help!! again thanks losers! I managed it myself after going through the whole f@cking internet search!