Reply
Thread Tools
Posts: 33 | Thanked: 1 time | Joined on Nov 2005 @ Oakland, Ca
#1
When I click on "memory" within the control panel, a blank screen comes up. There is a "memory" header, but no information inside. My sytem kindof locks up at this time. (My memory has no yet been upgraded). Has this happened to anyone ?
 
Posts: 111 | Thanked: 9 times | Joined on Nov 2005 @ Hong Kong
#2
Yes, i had the same before. I think it's checking the size of all the files on the device (memory + mmc card). In my case, I tried rebooting, but it didn't help. Eventually, I let it run for a while and the result came up.
 
Posts: 75 | Thanked: 1 time | Joined on Dec 2005
#3
I have the same thing happen to me everytime I try to check memory and everytime I end up having to force my way out of the window. I have yet to see my memory status - am I not waiting long enough?

Tony
 
Posts: 59 | Thanked: 5 times | Joined on Nov 2005
#4
It happened for me right after upgrading the software.
 
Posts: 111 | Thanked: 9 times | Joined on Nov 2005 @ Hong Kong
#5
Originally Posted by myet01
I have the same thing happen to me everytime I try to check memory and everytime I end up having to force my way out of the window. I have yet to see my memory status - am I not waiting long enough?

Tony
Have you tried removing the mmc card?
 
Posts: 75 | Thanked: 1 time | Joined on Dec 2005
#6
No I haven't but I will try. However, the MMC card seems to work OK, what is your theory behind the suggestion?
 
Posts: 111 | Thanked: 9 times | Joined on Nov 2005 @ Hong Kong
#7
I think memory on both device and MMC card are checked. So removing the card might speed up things.
 
Posts: 10 | Thanked: 0 times | Joined on Dec 2005
#8
i had the same problem, but seems to be ok since i upgraded to 45-8.
 
Posts: 75 | Thanked: 1 time | Joined on Dec 2005
#9
Does anyone know what updates are in the -8 upgrade? I have the -7 and I don't see any need to upgrade at this time if it only includes this one fix to the memory display. Also, is there a good step-by-step instruction for upgrading firmware?

Tony
 
teemu's Avatar
Posts: 40 | Thanked: 1 time | Joined on Nov 2005 @ Espoo, Finland
#10
Originally Posted by myet01
Does anyone know what updates are in the -8 upgrade? I have the -7 and I don't see any need to upgrade at this time if it only includes this one fix to the memory display. Also, is there a good step-by-step instruction for upgrading firmware?

Tony
I had the memory problem also and -8 version fixed it.

Upgrading is fairly simple. Just go to this page on nokia.com and type in your device's MAC address there. You can get it from a sticker under the battery. It's the one where it says WLAN. After this you get instructions on how to update and also the software for Windows XP if you are not using Linux. The version on that site is -7 so to get -8 version you should go here . Again you will need the same MAC address before you can download the image.
__________________
Teemu

www.teemuharju.net
 
Reply


 
Forum Jump


All times are GMT. The time now is 21:57.