My Nokia N900 Will No Longer Flash The eMMC Image After Installing The MeeGo FirmWare, I Flashed Back To Maemo, But It Will Not Allow eMMC To Flash Here's What I Get,

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Xenon-Elite>cd C:\flash

C:\flash>flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f
-R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 241163 kB
Version RX-51_2009SE_1.2009.41-1.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_3.2010.02-8_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.

It Finds The Phone But Will Not Flash, Any Ideas.?

Thank You,

Anthony-Curtis

Can Aneone Help Me With This Or No.?

I Really Could Do With Some Answers.!

Thank You,

Anthony-Curtis

Did you notice this?

Flashing the eMMC in the N900

When flashing the eMMC content, always flash the FIASCO/Rootfs image first, then the eMMC. Do not boot up the device between the two!

im assuming you have the right USB drivers as youve done it before...

libusb
USB library (only for Windows and Mac OS X installations)

http://pc-connectivity.garage.maemo.....1.12.1.tar.gz


ive done both, flash eMMC first then FW, and visa versa. never had a problem.

I Can Flash The OS 100% Fine, Just Will Not Allow Me Todo eMMC I Dont Understand.?

Anthony-Curtis

how long do you wait...

mine took a few seconds, but people have said it sometimes takes a while longer? for it to find phone again...

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Xenon-Elite>cd C:\flash

C:\flash>flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f
-R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 241163 kB
Version RX-51_2009SE_1.2009.41-1.VANILLA
Suitable USB device not found, waiting. ((Waiting For Devoce Here))
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101 ((Finds My Phone))
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_3.2010.02-8_PR_MR0
Booting device into flash mode. ((Boots Into Flash Mode))
Suitable USB device not found, waiting. ((Looses Phone))

Thank You,

Anthony-Curtis

the only problems i seem to have are stupid ones,

you aint doing anything silly

you have full battery?
got the eMMC in your flasher directory?

also...would it not be easier to rename the eMMC to just rx51 to eliminate spelling errors and easier input

No Errors You Can Use TAB<--> And It Auto Picks Up File.!

Yes Battery Is Full,

Funny Tho, Ive Mangaed To Flash It Many Times Before But Since I Flashed The MeeGo OS I Am Unable Too.

Hmmm

Anthony-Curtis

hmmmm... i wouldnt know what the MeeGo OS would do to phone, as it was basically an Alpha Beta. is there nothing in the MeeGo forum about it? im sure a few people have flashed to meego and back again...