Active Topics

 


Reply
Thread Tools
solstice88 is offline solstice88
2013-01-21 , 20:14
Posts: 72 | Thanked: 29 times | Joined on Feb 2012 @ US
#1
I think this N9 has met its time.

It first started with a normal phone call and all of sudden the call drops, my lock screen hangs and i get devlockd not responding. If i press yes, It restarts the application and try reentering the lock code. Still continues to hangs and the process loops over whether i wait, press yes, or no.

Decided to reflash the firmware and emmc.

The phone boots up normally with no more lock screen but intermittently hangs on screens. Left it alone for a couple hours and the unit still continues to act up. I decided to reboot and first noticed after the Nokia boot logo it freezes for about 4-5 seconds and then goes to the home screen.

Once the phone boots to the home screen I can't seem to use any application on an extensive level without it crashing or application is not responding. i.e. Using the dailer to check IMEI number gives me the not responding message, or going to settings page, to view firmware causes it to hang.
IMEI, MAC, Bluetooth ids are all blank!

Please help.. Flashing firmware still works. Phone is still somewhat operable. Swipe between the three screens works, but almost all applications becomes non-responsive.

In the US, so no Nokia Care Center here. All ive got is TMO.
 

The Following User Says Thank You to solstice88 For This Useful Post:
solstice88 is offline solstice88
2013-01-22 , 01:44
Posts: 72 | Thanked: 29 times | Joined on Feb 2012 @ US
#2
If it helps this is a log from nokia flasher.

Code:
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 21902 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 18 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[_] cmt-algo     [init       100 %     789 /     789 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    1811 kB/s]
[_] rootfs       [writing      0 %   36864 / 1170282 kB    1010 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown erro

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[f] cmt-algo     [init         0 %     789 /     789 kB      NA     ]
[-] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    1811 kB/s]
[x] rootfs       [finished   100 % 1170282 / 1170282 kB   10804 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Timeout while waiting for the HWBREAK
Could not reboot into cold bootmode
[Pipe   6] Finishing in error state with status 1
========================================

ERROR: Failed to flash images
 

The Following User Says Thank You to solstice88 For This Useful Post:
Makeclick is offline Makeclick
2013-01-22 , 06:36
Posts: 586 | Thanked: 471 times | Joined on Jan 2010 @ Finland
#3
You maybe need to use a cold flash option and re download your Fiasco image.. maybe it's broken? Does it work? (flasher -f -F -c fia.img em.img)
 

The Following User Says Thank You to Makeclick For This Useful Post:
An9 is offline An9
2013-01-22 , 11:53
Posts: 164 | Thanked: 47 times | Joined on Jun 2012
#4
Originally Posted by Makeclick View Post
You maybe need to use a cold flash option and re download your Fiasco image.. maybe it's broken? Does it work? (flasher -f -F -c fia.img em.img)
Hi friend, is ther any way of forcing to flash the phone v.1.3, 009 to 001...the original was 005, but i want to have fw vanila 001 on my phone
 

The Following User Says Thank You to An9 For This Useful Post:
thedead1440 is offline thedead1440
2013-01-22 , 12:05
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#5
Originally Posted by An9 View Post
Hi friend, is ther any way of forcing to flash the phone v.1.3, 009 to 001...the original was 005, but i want to have fw vanila 001 on my phone
Nope...

10chars
 

The Following User Says Thank You to thedead1440 For This Useful Post:
solstice88 is offline solstice88
2013-01-23 , 02:01
Posts: 72 | Thanked: 29 times | Joined on Feb 2012 @ US
#6
Originally Posted by Makeclick View Post
You maybe need to use a cold flash option and re download your Fiasco image.. maybe it's broken? Does it work? (flasher -f -F -c fia.img em.img)
no luck still having issues using the phone. having issues flashing cmt

Code:
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[_] cmt-algo     [init       100 %     789 /     789 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    1833 kB/s]
tried the --flash-only cmt doesnt work either.
Last edited by solstice88; 2013-01-23 at 02:26.
 

The Following User Says Thank You to solstice88 For This Useful Post:
thedead1440 is offline thedead1440
2013-01-23 , 14:40
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#7
solstice88,

Have you used a China FW before? Also please post full flasher log instead of portions of it...
 

The Following User Says Thank You to thedead1440 For This Useful Post:
solstice88 is offline solstice88
2013-01-23 , 15:24
Posts: 72 | Thanked: 29 times | Joined on Feb 2012 @ US
#8
Originally Posted by thedead1440 View Post
solstice88,

Have you used a China FW before? Also please post full flasher log instead of portions of it...
Not exactly. I used a Singapore FW. My apologies. I will post the full log when i get home. Logs almost seem to be the same every time i flash. Everything passes except the cmt portions.

I have read of only one incident on the meego forums but it was never really resolved.
 

The Following User Says Thank You to solstice88 For This Useful Post:
Reply

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 01:17.

Contact Us - Home - Archive - Top