Notices
Page 3 of 48 12 3 4513 Last »
Reply
Thread Tools
anapospastos's Avatar
anapospastos is offline anapospastos
2011-06-14 , 14:51
Posts: 553 | Thanked: 183 times | Joined on Oct 2009 @ Not decided
#21
I reinstalled enhanced busybox and now it's working.
__________________
My name was Maemo, then it became Meego and now I'm getting a third one. I am Sailfish.
 
comaX is offline comaX
2011-06-14 , 15:06
Posts: 83 | Thanked: 142 times | Joined on Jun 2011 @ Paris, France
#22
Originally Posted by stevomanu View Post
im getting this error any ideas why

Code:
cat: cannot open '/temp/yamas.txt' : no such file or directory

i have wget installed but still same issue ..

great script thou thanks for all help
Hi ! I'm the one who wrote the script. It's great to see people reacting so much in such a short time !

Regarding this error, the path to which the log is saved should be /tmp/ and not /temp/

Originally Posted by laasonen View Post
Decided to give the script a shot. At least my laptop running Arch Linux on WPA2-PSK protected WLAN staid secure.
There is a more complete version available on my website http://comax.pagesperso-orange.fr if you want to run it on a laptop.

Originally Posted by vi_
EVERYONE ELSE. Make sure you run this script as root, DOH!
Yup !

Please report any error either by mail directly to me (you'll find it on my website), or on pcscience.info page. You can of course post it here to get help from members, but I might not check very often...

I hope you like it, cheers !
 

The Following 18 Users Say Thank You to comaX For This Useful Post:
vi_ is offline vi_
2011-06-14 , 15:08
Posts: 1,680 | Thanked: 3,685 times | Joined on Jan 2011
#23
Originally Posted by comaX View Post
Hi ! I'm the one who wrote the script. It's great to see people reacting so much in such a short time !

Regarding this error, the path to which the log is saved should be /tmp/ and not /temp/



There is a more complete version available on my website http://comax.pagesperso-orange.fr if you want to run it on a laptop.



Yup !

Please report any error either by mail directly to me (you'll find it on my website), or on pcscience.info page. You can of course post it here to get help from members, but I might not check very often...

I hope you like it, cheers !
Holy fvck, you are comaX!

Your script rulez.

You rulez.

Thank you for your contribution.
__________________
N900: One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
 
stevomanu is offline stevomanu
2011-06-14 , 15:40
Posts: 529 | Thanked: 194 times | Joined on Aug 2010 @ UK
#24
my bad i added an e in there the problem is


Code:
cat: cannot open '/tmp/yamas.txt' : no such file or directory
..
__________________
METASPLOIT INSTALL N900
Keep the forums clean
Dont forget to say thanks
 
cutehunk04's Avatar
cutehunk04 is offline cutehunk04
2011-06-14 , 15:42
Posts: 472 | Thanked: 195 times | Joined on Jun 2010 @ India, Mumbai
#25
sorry for asking silly question... but what exactly this application does..??
__________________
Knowledge is knowing a tomato is a fruit; Wisdom is not putting it in a fruit salad
 
bipinbn is offline bipinbn
2011-06-14 , 15:58
Posts: 92 | Thanked: 95 times | Joined on Feb 2010 @ Smyrna, Atlanta / Bangalore, India
#26
Originally Posted by comaX View Post
Hi ! I'm the one who wrote the script. It's great to see people reacting so much in such a short time !

Regarding this error, the path to which the log is saved should be /tmp/ and not /temp/



There is a more complete version available on my website http://comax.pagesperso-orange.fr if you want to run it on a laptop.



Yup !

Please report any error either by mail directly to me (you'll find it on my website), or on pcscience.info page. You can of course post it here to get help from members, but I might not check very often...

I hope you like it, cheers !
Comax..you are the boss..respect and thanks

I am done installing nmap,ettercap-ng and sslstrip...everything went fine without issues.

I am now running the script and facing the following issues:

Attack is running. You can :
1. Rescan network.
2. Add a target (useless if targeting whole network).
3. Display ASCII correspondence table.
4. Tail-grep hosts through output (make sure there is traffic).
5. Real-time parsing...
6. Quit properly.

Enter the number of the desired option.
mitm_pcsci3nce.sh: line 393: xterm: not found


When i select option 4 i get the "xterm:not found" error.

And also after i scan the network and add a target how do i get the username and passwords

Thanks for the script again
 
bipinbn is offline bipinbn
2011-06-14 , 16:33
Posts: 92 | Thanked: 95 times | Joined on Feb 2010 @ Smyrna, Atlanta / Bangalore, India
#27
Originally Posted by bipinbn View Post
Comax..you are the boss..respect and thanks

I am done installing nmap,ettercap-ng and sslstrip...everything went fine without issues.

I am now running the script and facing the following issues:

Attack is running. You can :
1. Rescan network.
2. Add a target (useless if targeting whole network).
3. Display ASCII correspondence table.
4. Tail-grep hosts through output (make sure there is traffic).
5. Real-time parsing...
6. Quit properly.

Enter the number of the desired option.
mitm_pcsci3nce.sh: line 393: xterm: not found


When i select option 4 i get the "xterm:not found" error.

And also after i scan the network and add a target how do i get the username and passwords

Thanks for the script again


resolved after doing "apt-get install xterm"

thanks
Bipin
 
Unhuman is offline Unhuman
2011-06-14 , 16:41
Posts: 111 | Thanked: 87 times | Joined on Jan 2010 @ Plovdiv, Bulgaria
#28
Script is still beta sort of speak. Will take a look at the tail-grep option. However, the main function of the script works flawlessly.

Main post is updated. I will not answer questions as 'what does this do' and etc. .. This script isn't a joke. If you don't know what this is for, you shouldn't even download it.
__________________
http://pcsci3nce.info
 

The Following User Says Thank You to Unhuman For This Useful Post:
vi_ is offline vi_
2011-06-14 , 22:52
Posts: 1,680 | Thanked: 3,685 times | Joined on Jan 2011
#29
Originally Posted by Unhuman View Post
Script is still beta sort of speak. Will take a look at the tail-grep option. However, the main function of the script works flawlessly.

Main post is updated. I will not answer questions as 'what does this do' and etc. .. This script isn't a joke. If you don't know what this is for, you shouldn't even download it.

Point 1. This doesn't work by your instructions.
Point 2. Please explain this error here:

Code:
Enter IP adresse(s).
192.168.1.2
 Targeting 192.168.1.2 on 192.168.1.1 on wlan0 with Ettercap

 Attack should be running smooth, enjoy.


Warning: Cannot convert string "nil2" to type FontStruct

Attack is running. You can :
1. Rescan network.
2. Add a target (useless if targeting whole network).
Point 3. Does this actually require a working version of 'arpspoof' installed.
__________________
N900: One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
 

The Following User Says Thank You to vi_ For This Useful Post:
Creamy Goodness is offline Creamy Goodness
2011-06-15 , 01:37
Posts: 1,463 | Thanked: 1,916 times | Joined on Feb 2008 @ Edmonton, AB
#30
you guys are "evil" but also increasing the value of the n900...
I thought this was going to make a fake AP but someone mentioned arp poisoning, I guess it works on whatever network you are associated then? I wonder how it works though, if it lets you do any target website, is the n900 pretending to be the default gateway?
 
Reply
Page 3 of 48 12 3 4513 Last »

Tags
pentesting, tester of pens

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 22:57.

Contact Us - Home - Archive - Top