Reply
Thread Tools
stale is offline stale
2009-02-18 , 00:46
Posts: 39 | Thanked: 13 times | Joined on Apr 2008 @ Genoa, Italy
#1
I'm trying to use timidity in server mode to emulate a midi sequencer.
Does somebody tried to do this on a tablet before? Any success?
I investigated a little bit on this but I'm not an expert in this matter.

I'm using the timidity package available on maemo-extras (not devel) installed from application manager.
This version does not support server mode by itself, to enable server mode I found the package http://repository.maemo.org/extras/p...emo3_armel.deb Since it won't install (maybe it requires red-pill mode?) I extracted the file interface_A.so end copied to /usr/lib/timidity.

Now it accepts -iA command line but shows the following error:

Code:
# timidity  -iA
TiMidity starting in ALSA server mode
ALSA lib seq.c:935:(snd_seq_open_noupdate) Unknown SEQ hw
error in snd_seq_open
I thought some modules were missing so I compiled them from maemo sdk, copied to the tablet and loaded them, but I still get the same error:

Code:
# insmod snd-timer.ko
# insmod snd-seq.ko
# insmod snd-seq-device.ko
# insmod snd-seq-midi-event.ko
# insmod snd-rawmidi.ko
# insmod snd-seq-midi.ko
# lsmod
Module                  Size  Used by
snd_seq_midi 6400 0 - Live 0xbf07d000
snd_seq_midi_event 6176 1 snd_seq_midi, Live 0xbf07a000
snd_rawmidi 19840 1 snd_seq_midi, Live 0xbf074000
snd_seq_device 6088 2 snd_seq_midi,snd_rawmidi, Live 0xbf071000
snd_seq 49288 2 snd_seq_midi,snd_seq_midi_event, Live 0xbf063000
snd_timer 19044 1 snd_seq, Live 0xbf05d000
# timidity  -iA
TiMidity starting in ALSA server mode
ALSA lib seq.c:935:(snd_seq_open_noupdate) Unknown SEQ hw
error in snd_seq_open
I also tried to recompile timidity from source but the result was the same.

It could be an alsa library issue? Suggestions are welcome.
Last edited by stale; 2009-02-18 at 00:49.
 
dfinch's Avatar
dfinch is offline dfinch
2009-02-18 , 02:06
Posts: 362 | Thanked: 82 times | Joined on Jan 2008
#2
I see someone had problems running Timidity on an eee and found an alternative. I have no experience of either I'm just a home recording enthusiast and would be interested in a sequencer for the N810.
Check out
http://forum.eeeuser.com/viewtopic.php?pid=508102
and especially his link to muse-sequencer.org
Cheers
__________________
N810, OS 2008 5.2008.43-7 (Diablo)
Nobody can accuse me of not contradicting the invalid arguments of the opposition!
Derek
 
stale is offline stale
2009-02-18 , 22:47
Posts: 39 | Thanked: 13 times | Joined on Apr 2008 @ Genoa, Italy
#3
Thanks to the suggestion of dfinch I tried to recompile fluidsynth an got almost the same error:

Code:
ALSA lib seq.c:935:(snd_seq_open_noupdate) Unknown SEQ default
This might point the finger against alsalib but I don't know what to do now.
 
stale is offline stale
2009-02-21 , 00:50
Posts: 39 | Thanked: 13 times | Joined on Apr 2008 @ Genoa, Italy
#4
Finally I found the magic to make it work. I report it here because it might be useful for other people.

ALSA library needs some definitions about the available devices and the seq device was missing.
These definitions are stored in /usr/share/alsa/alsa.conf that includes /etc/asound.conf and ~/.asoundrc if they exists.
I created a file named .asoundrc into the /home/user directory, added the following lines and then it worked!

Code:
seq.default {
	type hw
}

seq.hw {
	type hw
}
Last edited by stale; 2009-02-21 at 00:53.
 
MrWeasel is offline MrWeasel
2009-02-21 , 21:36
Posts: 76 | Thanked: 41 times | Joined on Nov 2008 @ Germany
#5
I'm also looking for those modules you managed to compile. Did you compile them from alsa source? Could you possibly post the binaries here?
Thanks
 
stale is offline stale
2009-02-22 , 00:25
Posts: 39 | Thanked: 13 times | Joined on Apr 2008 @ Genoa, Italy
#6
Originally Posted by MrWeasel View Post
I'm also looking for those modules you managed to compile. Did you compile them from alsa source? Could you possibly post the binaries here?
Thanks
I compiled them from diablo kernel sources in scratchbox. I didn't post them before because I was still looking for a convenient way to package them.
In the meantime, as you suggested, I'm adding them here as attachment.

Are you going to use them with a specific application?
I built them because I recompiled nted and it requires a midi sequencer for playing. If somebody is interested in nted I would try to post it but it is just a recompile, not yet hildonized nor packaged.
Attached Files
File Type: gz midiseq-modules.tar.gz (52.1 KB, 164 views)
 
bbay6342 is offline bbay6342
2011-09-06 , 15:56
Posts: 7 | Thanked: 0 times | Joined on Aug 2011
#7
Originally Posted by stale View Post
I compiled them from diablo kernel sources in scratchbox. I didn't post them before because I was still looking for a convenient way to package them.
In the meantime, as you suggested, I'm adding them here as attachment.

Are you going to use them with a specific application?
I built them because I recompiled nted and it requires a midi sequencer for playing. If somebody is interested in nted I would try to post it but it is just a recompile, not yet hildonized nor packaged.
i already install nted under easy debian, but it shows me an error of midi sequencer.. will u help me how to configure so the midi playable?
thank in advance
 
Reply

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 04:54.

Contact Us - Home - Archive - Top