jpala16 i am also on v47 i haven't yet made it to v48, i've always removed the scripts before running the repos but i don't think it makes any difference. i'm back on batterypatch for non kp users and karam's custom profile.

i have karams battery patch installed. jst double checking.i have this when i type kernel-config show


BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ sudo gainroot
Root shell enabled


BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/home/user # kernel-config show
current kernel configuration:
current frequency: 500
supported frequencies: 125 250 500 550 600 700 750 805 850 900 950 1000 1100 1150
min. frequency: 500
max. frequency: 750
avoid frequencies:
active frequencies: 0:22,90 125:30,90 250:28,180 500:30,360 550:33,400 600:38,430 700:45,430 750:45,430 805:48,430 850:48,500 900:54,500 950:54,500 1000:60,500 1100:72,520 1150:72,520
SmartReflex VDD1=1, VDD2=1
governor conservative:
/home/user #


and is usr/share/kernel-power-settings. i have two extra profiles. overclock and underclock. is it okay guys?

Trish. your usage sounds about normal to me for what your battery shows. Would be about the same for me.

As an update to the random reboots with KP48 plus these patches installed:

I am not getting any reboots now. What I did was remove all these patches, then reinstalled speedpatch to test that. Worked ok. no reboots, then reinstalled battery patch(non kp version), working ok now, no reboots for a few hours since installing the non-kp version of the battery patch. I won't be doing the custom profile thing as things are running nice now, and I suspect that if there is a conflict between kp48 then the custom profile part will be where it is coming from.

just installed batterypatch from repos and had a play with the voltages in underclock, see if it makes it stabler for me.

My profiles are posted here. I edited edit /opt/dbus-scripts/cpu_sleep and edit /opt/dbus-scripts/cpu_normal to point to these profiles and they have worked well for me.

Awake does not have smart reflex due to max frequency being at 850, but if you changed this to 805 you could then enable smart reflex.

cheers mornage i've edited the proflies as well, sounds like i have done similar to what you have unfortunately smart reflex ends for me at 750 so jealous of karam and his device lol


update: no reboots so far.

update it's 2030 and no reboots, battery life is looking spot on. good times

i can't find path dbus-scripts in opt .. i'm sure i have installed dbus-script

Since installing the patch, "hen" to the cable does not supply power when active "boost on VBUS. I say this because since I have not gotten use to work, my multimeter does not detect voltage.

Any ideas?

Maybe the voltage is too low on batterypatch profiles for that purpose? You could try to have a queen beacon widget on desktop that sets higher voltage kernel power profile, so that when you are going to use "hen" you could tap on it and have higher voltages.
It can be for another reason, but you only lose some time trying.
Oh! And remember that if the device gets locked it will revert back to underclock, and unlocking will set the overclock profile.

It should be there if you have battery patch installed. Try removing and re-installing both battery patch and dbus-scripts.