Page 295 of 300 « First 285293294 295 296297 Last »
Reply
Thread Tools
Mr. Incredible is offline Mr. Incredible
2012-03-18 , 18:36
Posts: 209 | Thanked: 44 times | Joined on Jan 2010 @ Austria
#2941
kp50 is runnig fine

Edit:
I love it how you keep our N900's still up to date and improve them.

Edit2:
Now I have problems. My N900 shutted down suddenly and won't boot anymore. It's stuck at the "NOKIA" bootscreen and the indicator LED stays white. I've got backupmenu installed but it won't show then I start the N900 with open keyboard. I left it several minutes without battery, no changes.

Edit3:
I flashed fiasco image. Now it's booting again (and I have to install all again and set it up)
Last edited by Mr. Incredible; 2012-03-18 at 19:26.
 
pali is offline pali
2012-03-18 , 19:13
Posts: 2,154 | Thanked: 8,464 times | Joined on May 2010
#2942
Bingo, packages are in repository: http://repository.maemo.org/extras-d.../kernel-power/

But again problem with maemo.org/package interface...
 

The Following 19 Users Say Thank You to pali For This Useful Post:
zzzchainzzz is offline zzzchainzzz
2012-03-18 , 19:49
Posts: 96 | Thanked: 27 times | Joined on Sep 2011
#2943
is this the end of kernel power 49 era?
 
ed_boner is offline ed_boner
2012-03-18 , 20:15
Posts: 336 | Thanked: 129 times | Joined on Jan 2011 @ portugal
#2944
Originally Posted by pali View Post
Changelog is here:
https://garage.maemo.org/builder/fre..._armel.changes
didnt find the changelog..but the update appeared in FAM and i installed it..so far everything is ok...reboot problem seems to be gone for good..just dont know what other changes are made..
 
pali is offline pali
2012-03-18 , 20:30
Posts: 2,154 | Thanked: 8,464 times | Joined on May 2010
#2945
Originally Posted by ed_boner View Post
didnt find the changelog..but the update appeared in FAM and i installed it..so far everything is ok...reboot problem seems to be gone for good..just dont know what other changes are made..
changelog is in first post
 

The Following 5 Users Say Thank You to pali For This Useful Post:
ed_boner is offline ed_boner
2012-03-18 , 21:05
Posts: 336 | Thanked: 129 times | Joined on Jan 2011 @ portugal
#2946
tks pali..awsome job guys!!
 
SeT is offline SeT
2012-03-18 , 21:11
Posts: 16 | Thanked: 11 times | Joined on Oct 2011
#2947
Upgrading 49 to 50 from debs.
dpkg -i kernel-power_2.6.28-10power50_armel.deb kernel-power-modules_2.6.28-10power50_armel.deb kernel-power-flasher_2.6.28-10power50_armel.deb
 

The Following User Says Thank You to SeT For This Useful Post:
Estel's Avatar
Estel is offline Estel
2012-03-18 , 21:28
Posts: 5,028 | Thanked: 8,613 times | Joined on Mar 2011
#2948
Originally Posted by pali View Post
Bingo, packages are in repository: http://repository.maemo.org/extras-d.../kernel-power/

But again problem with maemo.org/package interface...
It's one of the rare situations, where You want to cheer'n'smile and cry in despair, at the same moment.

Anyway, huge thanks for pushing it into repos!
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 
xes is offline xes
2012-03-18 , 21:37
Posts: 638 | Thanked: 1,692 times | Joined on Aug 2009
#2949
kernel-power...... The most difficult thing is put in the repo.
Fixing is the easy part of the job!

Many thanks to all the night developers making this device everyday a better and greater... MONSTER!!!

so... Installed and perfectly working!

@freemangordon
The only doubt (in my opinion) is about the sr voltage calculation for higher dsp frequencies.
Attached you can find my working profile.
Until now i don't have any crash but, as you can see, the difference between the voltages for 805,850,900 is very very little.
If i move the dsp 600 mhz frequency to the 850mhz core frequency the device hangs at first video playback.

What do you think about?

Here my profile:
kernel-config show

current kernel configuration:
current frequency: 900
supported frequencies: 125 250 500 550 600 720 805 850 900 950 1000 1100 1150
min. frequency: 125
max. frequency: 900
avoid frequencies:
active frequencies: 125:22,90 250:25,180 500:37,360 550:39,400 600:42,430 720:49,520 805:52,520 850:54,560 900:55,600 950:60,600 1000:60,600 1100:72,600 1150:72,600
SmartReflex VDD1=1, VDD2=1
governor ondemand: ignore nice load= 0, up threshold= 95, sampling rate= 300000, powersave bias= 0
Last edited by xes; 2012-03-19 at 00:17.
 

The Following User Says Thank You to xes For This Useful Post:
Estel's Avatar
Estel is offline Estel
2012-03-18 , 22:31
Posts: 5,028 | Thanked: 8,613 times | Joined on Mar 2011
#2950
The thing is, that, if You use profile You've provided, You can "trash" voltage settings provided in "active frequencies", as SR is calculating and overriding them.

To be absolutely sure that it's SR fault, *disable* both SR (or, at least, VDD1), and check if Your device is absolutely stable with Your profile. If yes, enable SR again, and check SR calculated voltage for 850 and 900, and put result here. We'll be able to see, how much of a difference is in calculated values, as compared to Your "default" profile values.

/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 

The Following User Says Thank You to Estel For This Useful Post:
Reply
Page 295 of 300 « First 285293294 295 296297 Last »

Tags
battery-status, bq27x00_battery, kernel, kernel-power, misiak4king, noobs-cant-read, pali4president, patches, readdirections, revolverspinyou

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 03:51.

Contact Us - Home - Archive - Top