Guys???
Anyone?

Maybe something is wrong with your overclocking, try if it is still the same without OC.

I've loaded the default config & it's the same...
Sometimes it records but only wvga (& sometimes it records even if CPU is clocked). HD is out of the question.
Maybe CPU is overheating or somethng like that.

Now, I've done this (http://talk.maemo.org/showpost.php?p...&postcount=251) & I can record, even if I OC it!

What the hell is wrong with my phone???

Latest kernel-power-settings "default" profile enables smartreflex, better move /etc/default/kernel-power to backup dir of your choice and reboot the device. also you may provide dmesg output for further investigation. Do you have some magic "patches" installed, i.e. speedpatch or batterypatch?

Don't know what dmesg output is. I'm just a stupid PC user.

When I reinstaled things (http://talk.maemo.org/showpost.php?p...&postcount=251) it could record even with smartreflex & kernel-config locked on 900.

I have no patches of that kind.

To get dmesg output, just open terminal, gain root (if You have this installed, You should already know rootsh or sudser, yep?) and type Warning - it isn't auto-updating list, it's just a "snapshot" of lines *up to* moment of execution. So, you want to execute it just after buggy situation.

/Estel

76.796325] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 76.796417] mmc0: new high speed SDHC card at address e624
[ 76.799224] mmcblk1: mmc0:e624 SU16G 14.8 GiB
[ 76.799530] mmcblk1:<6>wl1251: loaded
[ 76.802886] wl1251: initialized
[ 76.805236] NET: Registered protocol family 35
[ 76.824127] SSI McSAAB PROTOCOL Version: 2.0-rc1
[ 76.830322] p1
[ 77.059051] mmc1: new high speed MMC card at address 0001
[ 77.064392] dspbridge_init: 600000 bytes @ 80e00000
[ 77.077178] mmcblk0: mmc1:0001 MMC32G 29.8 GiB
[ 77.077514] mmcblk0: p1 p2 p3
[ 77.337402] omap-iommu omap-iommu.1: isp registered
[ 77.534820] isp_mod: disagrees about version of symbol struct_module
[ 77.614440] omap-iommu omap-iommu.1: isp: version 1.1
[ 77.827239] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin
[ 77.846984] smia_reglist_import: meta_reglist version 2009-07-27
[ 77.847076] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/1502 ptr d0d412a0
[ 77.847076] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/3003 ptr d0d41228
[ 77.847106] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0d41090
[ 77.847137] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0d41038
[ 77.864990] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin
[ 77.884277] smia_reglist_import: meta_reglist version V4 alma 10.10.10
[ 77.884368] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0d44464
[ 77.884399] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0d44204
[ 77.884399] smia_reglist_import: type 10 w 1728 h 1312 fmt 30314142 ival 100/11792 ptr d0d44884
[ 77.884429] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/13000 ptr d0d447ec
[ 77.884460] smia_reglist_import: type 10 w 1296 h 984 fmt 30314142 ival 100/501 ptr d0d4458c
[ 77.884460] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/3000 ptr d0d4429c
[ 77.884490] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/2500 ptr d0d44624
[ 77.884521] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/13584 ptr d0d44754
[ 77.884521] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/2988 ptr d0d44334
[ 77.884552] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/499 ptr d0d444f4
[ 77.884552] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/14779 ptr d0d446bc
[ 77.884582] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/2993 ptr d0d443cc
[ 77.884613] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0d4405c
[ 78.519317] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007
[ 78.519409] g_file_storage gadget: Number of LUNs=2 Number of buffers=16
[ 78.519439] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 78.521636] drivers/usb/core/inode.c: creating file 'devices'
[ 78.521667] drivers/usb/core/inode.c: creating file '001'
[ 78.523559] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[ 78.523712] usb usb1: default language 0x0409
[ 78.524047] usb usb1: uevent
[ 78.525756] usb usb1: usb_probe_device
[ 78.525787] usb usb1: configuration #1 chosen from 1 choice
[ 78.525909] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 78.526031] usb 1-0:1.0: uevent
[ 78.527221] hub 1-0:1.0: usb_probe_interface
[ 78.527221] hub 1-0:1.0: usb_probe_interface - got id
[ 78.527252] hub 1-0:1.0: USB hub found
[ 78.527374] hub 1-0:1.0: 1 port detected
[ 78.527404] hub 1-0:1.0: standalone hub
[ 78.527404] hub 1-0:1.0: individual port power switching
[ 78.527435] hub 1-0:1.0: no over-current protection
[ 78.527435] hub 1-0:1.0: power on to power good time: 10ms
[ 78.527465] hub 1-0:1.0: local power source is good
[ 78.527465] hub 1-0:1.0: enabling power on all ports
[ 78.530609] drivers/usb/core/inode.c: creating file '001'
[ 78.531768] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 78.531829] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 78.531890] usb usb1: Product: MUSB HDRC host driver
[ 78.531921] usb usb1: Manufacturer: Linux 2.6.28.10-power50 musb-hcd
[ 78.531951] usb usb1: SerialNumber: musb_hdrc
[ 78.621429] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 80.621643] hub 1-0:1.0: hub_suspend
[ 80.621734] usb usb1: bus auto-suspend
[ 82.614593] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k
[ 83.169555] omap mailbox rev 4.0
[ 83.192169] DSP Bridge driver loaded
[ 83.922546] EXT3 FS on mmcblk0p2, internal journal
[ 83.922637] EXT3-fs: mounted filesystem with writeback data mode.
[ 83.949737] kjournald starting. Commit interval 1 seconds
[ 88.237762] McSAAB: ACWAKE DOWN
[ 88.237823] McSAAB: ACWAKE UP
[ 88.237854] McSAAB: WAKELINES TEST OK
[ 88.868164] Bluetooth: L2CAP ver 2.13
[ 88.868194] Bluetooth: L2CAP socket layer initialized
[ 88.965362] Bluetooth: SCO (Voice Link) ver 0.6
[ 88.965393] Bluetooth: SCO socket layer initialized
[ 89.004394] hci_h4p hci_h4p: firmware: requesting bcmfw.bin
[ 89.610046] Bluetooth: RFCOMM socket layer initialized
[ 89.610107] Bluetooth: RFCOMM TTY layer initialized
[ 89.610137] Bluetooth: RFCOMM ver 1.11
[ 90.806701] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 93.432708] misc iphb: Module registered in 2.6.28.10-power50, built Mar 18 2012 20:12:04
[ 98.681396] ***** DSPMMU FAULT ***** IRQStatus 0x2
[ 98.681427] ***** DSPMMU FAULT ***** fault_addr 0x204f1440
[ 98.681457] bridge_deh_notify: ********** DEVICE EXCEPTION **********
[ 98.681457] bridge_deh_notify: DSP_MMUFAULT,err_info = 0x0
[ 98.681457] bridge_deh_notify: DSP_MMUFAULT, High Address = 0x204f
[ 98.681488] bridge_deh_notify: DSP_MMUFAULT, Low Address = 0x1440
[ 98.681488] bridge_deh_notify: DSP_MMUFAULT, fault address = 0x204f1440
[ 98.681640] print_dsp_trace_buffer:
[ 98.681640]
[ 98.681823] procwrap_detach: deprecated dspbridge ioctl
[ 98.870788] proc_stop: Can't stop device, active nodes = 1
[ 117.328643] cfg80211: Regulatory domain changed to country: EU
[ 117.328674] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 117.328674] (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 117.328704] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 117.328704] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 117.328735] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 117.328735] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 117.328765] (5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 118.898254] SCSI subsystem initialized
[ 119.085205] Driver 'sd' needs updating - please use bus_type methods
[ 257.004394] kb_lock (GPIO 113) is now closed
[ 257.215240] kb_lock (GPIO 113) is now open
[ 289.332519] slide (GPIO 71) is now open
[ 293.260925] twl4030_keypad twl4030_keypad: Spurious key event 4-2
[ 293.389404] twl4030_keypad twl4030_keypad: Spurious key event 4-2
[ 317.496154] NET: Registered protocol family 10
[ 317.496795] lo: Disabled Privacy Extensions
[ 326.535827] wl12xx spi4.0: firmware: requesting wl1251-fw.bin
[ 327.355804] slide (GPIO 71) is now closed
[ 327.590332] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 327.606018] wl1251: firmware booted (Rev 4.0.4.3.7)
[ 327.848449] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 329.317016] wl1251: down
[ 330.816955] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 330.832427] wl1251: firmware booted (Rev 4.0.4.3.7)
[ 331.043579] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 331.887298] wlan0: authenticate with AP 20:2b:c1:d7:8e:02
[ 331.890228] wlan0: authenticated
[ 331.890258] wlan0: associate with AP 20:2b:c1:d7:8e:02
[ 331.895568] wlan0: RX AssocResp from 20:2b:c1:d7:8e:02 (capab=0x401 status=0 aid=1)
[ 331.895599] wlan0: associated
[ 332.082885] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 335.068359] wlan0: roaming signal from driver, sending LOWSIGNAL
[ 336.092468] wlan0: roaming signal from driver, sending HIGHSIGNAL
[ 337.116455] wlan0: roaming signal from driver, sending LOWSIGNAL
[ 338.161010] wlan0: roaming signal from driver, sending HIGHSIGNAL
[ 339.164306] wlan0: roaming signal from driver, sending LOWSIGNAL
[ 341.212371] wlan0: roaming signal from driver, sending HIGHSIGNAL
[ 342.113616] wlan0: no IPv6 routers present
[ 342.850921] wlan0: roaming signal from driver, sending LOWSIGNAL
[ 348.483062] wlan0: roaming signal from driver, sending HIGHSIGNAL
[ 349.507659] wlan0: roaming signal from driver, sending LOWSIGNAL
[ 351.452911] wlan0: roaming signal from driver, sending HIGHSIGNAL
[ 365.519927] cam_shutter (GPIO 110) is now open
[ 365.538269] wlan0: deauthenticating by local choice (reason=3)
[ 365.777923] wl1251: down
[ 375.191802] cam_focus (GPIO 68) is now active
[ 377.029052] af: af not configured
[ 377.605926] cam_launch (GPIO 69) is now active
[ 377.894927] cam_launch (GPIO 69) is now inactive
[ 377.965209] cam_focus (GPIO 68) is now inactive
[ 379.369842] procwrap_detach: deprecated dspbridge ioctl
[ 384.027770] cam_focus (GPIO 68) is now active
[ 384.426177] cam_launch (GPIO 69) is now active
[ 384.582397] cam_launch (GPIO 69) is now inactive
[ 384.668334] cam_focus (GPIO 68) is now inactive
[ 388.543457] cam_shutter (GPIO 110) is now closed
[ 389.488739] cam_shutter (GPIO 110) is now open
[ 396.590362] cam_shutter (GPIO 110) is now closed
[ 397.558959] slide (GPIO 71) is now open
[ 409.949218] twl4030_keypad twl4030_keypad: Spurious key event 4-2
[ 410.110595] twl4030_keypad twl4030_keypad: Spurious key event 4-2


I hope this is it. I did this after I tried to record & failed.

just testing this morning

and i figure even when dsp set 0 still handle record video in hd and playing video without the error msg "unsupported" or "unable to play"

is that mean it uses cpu instead dsp?

@branja
a simple way is to install the stock dsp
then reinstall the 720p dsp libraries
if it didn't work
well search the latest startup installed apps and remove them
then retest

@freemangordon

if he was using sp then it has nothing to do with recording
as for bp well it's overclock profile has the dsp overclock

"a simple way is to install the stock dsp
then reinstall the 720p dsp libraries"

To what?
Mate, I don't understand that. U have to make it a lil' bit simpler than that (as if to literally write me what to do)...sorry, I'm quite a noob...