@geneven

is that so ?
hmm well i believe you didn't understand what i said
their won't be problems
you will just have the min freq get set to the freq right before the max one
if they are both same freq
ex :
min : 500
max : 500
then
min 250
max : 500

got it ?
else you can even read faqs at qcpu gui application

@phamgia
i advice you to install batterypatch
and remove it after then
in this case any older versions will be removed too

ps : i have changed batterypatch working method
so if you have a script version for example
then
remove the folder /opt/dbus-scripts

and btw there is a version called
batterypatch-for-unstable
give it a try

@Mohammed Muid
speedpatch has got nothing to do with unexpected reboots
something else must be causing it
maybe updated a program ? maybe messed up with some settings ?

else try to uninstall sp and check if the reboots are gone

@romiiio
those stutters..
well would you try to edit
/opt/batterypatch/profiles/underclock-new
and change the max to 600
let me know what happens with you

@Mohammed Muid

Have you updated to latest libxau6?
Check this: http://talk.maemo.org/showthread.php?t=83939

EDIT:
Oh sorry.. you have already did it..

yes i did. then faced reboot loop. then restored my device with backupmenu. now i still have upgrades leff like shell but not upgrading it.

@ karam uninstalled speedpatch and problem solved. now i remember that i previously had speedpatch installed. had to uninstall it cz i faced the same problem earlier

i tried to install the battery patch but it say it couldn't find the packages
i've installed bash
i put the file in home/user/MyDocs. what did i miss here

Batterypatch is good, but why batterypatch don't working on a bit more overclock than 805. I would like to set 500-900 with ideal profile voltage (it.s fully stable on my n900)

you can easily control bp

just read the FAQS part @1st post

Karam - Ok, I edit /opt/batterypatch/profiles/overclock-new and set max freq to 900 and after reboot n900 load my old profile (I set it before installing batterypatch). When I type in terminal: "echo 1000 >> /proc/sys/vm/vfs_cache_pressure" lock it and type "cat /proc/sys/vm/vfs_cache_pressure" - batterypatch is working, but max cpu freq is 805 again :/

EDIT: It's working I edit "/usr/share/kernel-power-settings/overclock" too, after reboot I have 500-900MHz clock with batterypatch.

It's my testing config. Working fine, but not much tested under heavy load (this voltage is from ideal profile, I was tested it on 500-900 clock (with smartreflex) before and it was fully stable, but now dsp is higher). Any sugestions for improvments this config ?
EDIT2: It's stable and battery life is really good for me.
I change "Samping_rate" to 150000 and "up_treshold" to 75 (like in "ideal" profile) - better performance for me, but I don't know how much is difference between this in battery life, but working faster on 150000 and 75.

Battery life: I disconnet n900 from charger 11hrs ago (at 8.00 am). Now conky shows 50% of battery - wifi always connected to AP, some internet browsing, some music on headphones, 2calls and about 7hours kadu in backgroud.

Thanks for batterypatch, it;s really good work, after set ideal profile voltages and 500-900clock .

PS: Sorry for my english.

installed batterypatch again and the phone hangs while I make phonecalls....is there any option to change in overclock-in call profile so that I can make it more stable?

@karam. when you will release a update for speedpatch to solve boot problem ? i.e booting from Nitdroid to Maemo stucks and shows only black screen until I manually turn it off and on it again.

Hy to all.
For me the speed patch realy works. It has no placebo effect as some users says.
My N900 was verry slow before de patch even though it was set to min 900 mgh and maxim 900 mgh
thanks again man .