Active Topics
-
Maemo repository (8)
to Community by Maemish - 16 hrs, 54 mins ago -
Porting apps to Leste (44)
to Maemo 7 / Leste by norayr - 21 hrs, 27 mins ago -
List of well performing apps on Leste (35)
to Maemo 7 / Leste by smatkovi - 3 days, 18 hrs ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (13)
to SailfishOS by edp17 - 4 days, 16 hrs ago -
Sailfish OS for the Samsung Galaxy Note 4 (SM-N910C) - (treltexx) (79)
to SailfishOS by edp17 - 4 days, 16 hrs ago -
U-Boot for Nokia RX-51 with BootMenu (updated version 2012.10-rc3-1) (843)
to Alternatives by Arno_11 - 4 days, 22 hrs ago - more...
|
2013-01-09
, 16:01
|
|
Posts: 545 |
Thanked: 560 times |
Joined on Dec 2011
@ lebanon
|
#12
|
Originally Posted by rainisto
thanks that might be an option
3rd option, take the working display from the new phone, and put it into the old phone for a while, take backups, and then switch display back to new unit.
mf@mf-desktop:~/Downloads$ sudo flashe--load -k vmlinuz-2.6.32.20112201-11.2-adaptation-n950-bootloader -n initrd.img-rescue-2.6.32.20112201-11.2-n950 --boot
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 001, device address 014.
Device identifier: 357923040135321 (SN: N/A)
Found device RM-696, hardware revision 1507
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_006
Sending kernel image (2497 kB)...
100% (2497 of 2497 kB, avg. 26858 kB/s)
Sending initfs image (1920 kB)...
100% (1920 of 1920 kB, avg. 30000 kB/s)
Success
mf@mf-desktop:~/Downloads$
|
|
2013-01-10
, 11:17
|
|
Community Council |
Posts: 4,920 |
Thanked: 12,867 times |
Joined on May 2012
@ Southerrn Finland
|
#13
|
So are you using a real linux or virtual machine inside a windows?
If you are running a real linux you might look what the dmesg command tells you after the phone boots the rescue image. There should be some lines about USB drives being detected, propably something like sdb (sdb1 sdb2 sdb3 ...)
If that happens, then you can mount the drives by hand, for example:
"mkdir n9_home; sudo mount /dev/sdb2 n9_home" and so on.
Then again, you could boot of another rescue image that allows you to telnet into the device and do the exports from there.
If you are running a real linux you might look what the dmesg command tells you after the phone boots the rescue image. There should be some lines about USB drives being detected, propably something like sdb (sdb1 sdb2 sdb3 ...)
If that happens, then you can mount the drives by hand, for example:
"mkdir n9_home; sudo mount /dev/sdb2 n9_home" and so on.
Then again, you could boot of another rescue image that allows you to telnet into the device and do the exports from there.
|
|
2013-01-10
, 17:50
|
|
Posts: 3 |
Thanked: 0 times |
Joined on Jan 2013
|
#14
|
Originally Posted by myname24
The same here. There is a notification of sucess, but fdisk does not reveal new drives. There are new ones under /dev but mounting them fails with statement that the drive does not exist.
No drive detected .
|
|
2013-01-10
, 17:52
|
|
Posts: 3 |
Thanked: 0 times |
Joined on Jan 2013
|
#15
|
Originally Posted by juiceme
Thats what I tired (real ubuntu), did not work.
So are you using a real linux or virtual machine inside a windows?
If you are running a real linux you might look what the dmesg command tells you after the phone boots the rescue image. There should be some lines about USB drives being detected, propably something like sdb (sdb1 sdb2 sdb3 ...)
If that happens, then you can mount the drives by hand, for example:
"mkdir n9_home; sudo mount /dev/sdb2 n9_home" and so on.
Then again, you could boot of another rescue image that allows you to telnet into the device and do the exports from there.
|
|
2013-01-10
, 21:27
|
|
Community Council |
Posts: 4,920 |
Thanked: 12,867 times |
Joined on May 2012
@ Southerrn Finland
|
#16
|
Look up my postings today on the sticky topic on this forum, " [HOWTO] Comprehensive Firmware Flashing Guide for N9".
There are directions on how to boot up the device in repair mode and access it with telnet to manually export the partitions.
There are directions on how to boot up the device in repair mode and access it with telnet to manually export the partitions.
|
|
2013-01-11
, 17:29
|
|
Posts: 545 |
Thanked: 560 times |
Joined on Dec 2011
@ lebanon
|
#17
|
Originally Posted by juiceme
Thanks it worked
Look up my postings today on the sticky topic on this forum, " [HOWTO] Comprehensive Firmware Flashing Guide for N9".
There are directions on how to boot up the device in repair mode and access it with telnet to manually export the partitions.
got all my data back .
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.