Page 5 of 6 « First 34 5 6
Reply
Thread Tools
mcbook is offline mcbook
2013-04-01 , 17:16
Posts: 446 | Thanked: 207 times | Joined on Sep 2012 @ Austria/Germany
#41
one may hide behind the $ (shortened because screen wasn't wide enough...)

Code:
Neutral=0;330;0;160;28;28;8;195;38;8;8;250;330;9900;0;160;28;28;8;195;38;8;8;250
Vivid=0;33000;0;205;0;0;0;245;0;0;0;265;33000;-1;0;235;-10;-10;-10;265;-10;-10;-10;285;33000;-1;1;255;-20;-20$
Muted=0;-1;0;115;48;48;15;152;73;32;32;200
i'm sure there are 4 sets
 
khan.orak is offline khan.orak
2013-04-01 , 17:27
Posts: 198 | Thanked: 130 times | Joined on Sep 2012 @ Pakistan
#42
That's ok but I asked because many coefficients other than the initial ones of RGB colors are different from what I have with me.

i.e. not only Red but Green and Blue value are also changed. So I needed those for this purpose.
__________________
N9 - 16 GB Black Reborn

Tutorial - OpenVPN for N9
 
mcbook is offline mcbook
2013-04-01 , 17:30
Posts: 446 | Thanked: 207 times | Joined on Sep 2012 @ Austria/Germany
#43
Yes they are different as well because edited them...
 
khan.orak is offline khan.orak
2013-04-01 , 18:02
Posts: 198 | Thanked: 130 times | Joined on Sep 2012 @ Pakistan
#44
@mcbook could you share your mce.ini ?? Sorry for troubling
__________________
N9 - 16 GB Black Reborn

Tutorial - OpenVPN for N9
 
mcbook is offline mcbook
2013-04-01 , 18:17
Posts: 446 | Thanked: 207 times | Joined on Sep 2012 @ Austria/Germany
#45
Np

Code:
[Display-c1]

# Color phase adjustments for the c1.* display revision
# Each value consists of sets of 12 numbers, each forming a entry for certain
# brightness range, the sets contain, brightness values in lux*3.3
# (330 = 100 lux):
#  - brightness range lower limit (one of the ranges should start from 0)
#  - brightness range upper limit (one of the ranges should have -1 = unlimited)
#  - high brightness mode level
#  - 3 coefficients for output red channel (red, green, blue)
#  - 3 coefficients for output green channel (red, green, blue)
#  - 3 coefficients for output blue channel (red, green, blue)

Neutral=0;330;0;160;48;13;22;195;28;8;8;250;330;9900;0;160;48;13;22;195;28;8;8;250
Vivid=0;33000;0;205;0;0;0;245;0;0;0;265;33000;-1;0;235;-10;-10;-10;265;-10;-10;-10;285;33000;-1;1;255;-20;-20;-20;285;-20;-20;-20;295;33000;-10;2;275;-30;-30;-30;305;-30;-30;-30;315
Muted=0;-1;0;115;79;21;40;152;51;32;32;200

[Display-fe]

# Color phase adjustments for the fe.* display revision
# See above for details

Neutral=0;330;0;160;28;28;8;195;38;8;8;250;330;9900;0;160;28;28;8;195;38;8;8;250
Vivid=0;33000;0;205;0;0;0;245;0;0;0;265;33000;-1;0;235;-10;-10;-10;265;-10;-10;-10;285;33000;-1;1;255;-20;-20;-20;285;-20;-20;-20;295;33000;-10;2;275;-30;-30;-30;305;-30;-30;-30;320
Muted=0;-1;0;115;48;48;15;152;73;32;32;200
or here

https://www.dropbox.com/s/tyta4wx1hg040gu/mce.ini
 

The Following User Says Thank You to mcbook For This Useful Post:
khan.orak is offline khan.orak
2013-04-01 , 18:22
Posts: 198 | Thanked: 130 times | Joined on Sep 2012 @ Pakistan
#46
Obliged!
__________________
N9 - 16 GB Black Reborn

Tutorial - OpenVPN for N9
 
Kallela is offline Kallela
2013-04-02 , 10:17
Posts: 49 | Thanked: 93 times | Joined on Jan 2012 @ Finland
#47
The two display entries (c1 and fe) in mce.ini correspond to two different display panel versions from two different manufacturers. That is why different N9s may have different color reproduction. You can dig up your panel version information for example from boot log with dmesg and grep:

Code:
dmesg | grep -i pyrenees
("Pyrenees" is the code name of N9 display panel, regardless of the manufacturer, I guess.)

Here is my outcome:

Code:
[    0.307434] panel-nokia-dsi display0: pyrenees panel revision c1.8b.96
[   11.115112] atmel_mxt 2-004b: firmware: requesting RM-696_Pyrenees_LGD_V1_1.bin
Panel revisions (and my observations):
  • "c1" (by LGD, LG Display)
    • reddish tint sometimes
    • more visible pixel matrix
  • "fe" (by SMD, Samsung Mobile Display)
    • greenish tint from extreme viewing angles
    • less visible pixel matrix

Originally Posted by mcbook View Post
A set of values for a profile looks like this

- 3 values for brightness (lower limit, upper limit, high brightness -> I wouldn't touch those numbers as I don't know what they are doing)
-3 values for the red color channel (R;G;B)
-3 values for the green color channel (R;G;B)
-3 values for the blue color channel (R;G;B)

...

e.g
Neutral=0;330;0;175;48;13;22;206;28;8;8;240;330;9900;0;175;48;13;22;206;28;8;8;240
The brightness values are the ambient brightness levels, measured by the ambient light sensor, not the display brightness! Unfortunately, I don't know either what that high brightness mode is, so there is still something to figure out. Maybe that is related to the selected display brightness level?

So you can define different color tunings for different lightning conditions inside one color profile (for day, night, etc.).

For example in that Neutral color profile, there are different color tunings for ambient lighting range 0-333 (i.e. 0-100 lux) and 333-9900 (i.e. 100-3000 lux), respectively. You can add more ranges, if needed. (Actually Neutral profile is not fully defined, as the range from 9900-(-1) (i.e. from 3000 lux to infinite) is not covered!)
 

The Following 7 Users Say Thank You to Kallela For This Useful Post:
Kallela is offline Kallela
2013-04-02 , 11:22
Posts: 49 | Thanked: 93 times | Joined on Jan 2012 @ Finland
#48
Originally Posted by knobtviker View Post
Trying to get some command way to switch them manually depending on the hour of the day. A simple rule to Profilematic and we have a Redshift/Flux clone.
Color profiles can be changed easily from command line as the setting is a GConf value, so you can do it with Profilematic.

Here is discussion how to do it:
http://talk.maemo.org/showthread.php?t=88621

Consider also trying to use ambient brightness ranges of the color profiles themselves, if you want different color tuning for night etc. (See my previous post.)
 
khan.orak is offline khan.orak
2013-04-02 , 14:30
Posts: 198 | Thanked: 130 times | Joined on Sep 2012 @ Pakistan
#49
How to bring up the boot log?

Edit: Typed command: dmesg | grep -i pyrenees

nothing happened in the beginning.

Then Kallela advised to reboot the phone. Entered the command
again and the info was there.

Thank you Kallela
__________________
N9 - 16 GB Black Reborn

Tutorial - OpenVPN for N9
Last edited by khan.orak; 2013-04-02 at 18:20.
 

The Following User Says Thank You to khan.orak For This Useful Post:
knobtviker's Avatar
knobtviker is offline knobtviker
2013-04-02 , 17:13
Posts: 665 | Thanked: 2,388 times | Joined on Feb 2012 @ Zagreb, Croatia
#50
Yes, I'm already finishing the app that adds and transforms the phone display to adhere to 3500K blackbody.
Brightness ranges don't really influence this idea. But I'll see and do my best.
__________________
¬ Flattr me for Wazapp
¬ READ THE WAZAPP WIKI
¬ Support my work by buying Dropian - a Dropbox client
¬ Get Soundwave - SoundHound for N9
 

The Following 7 Users Say Thank You to knobtviker For This Useful Post:
Reply
Page 5 of 6 « First 34 5 6

Tags
red tint, reddish display

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 10:54.

Contact Us - Home - Archive - Top