Producing Qwerty OtherHalf --order counter: 75/75 --ordering closed - Page 66 - maemo.org

Active Topics

Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (3)
to SailfishOS by edp17 - 6 hrs, 35 mins ago
The N900 is now 15 years old! (6)
to Nokia N900 by Macros - 1 day, 10 hrs ago
F(x)tec Pro1x (QWERTY) for sale (0)
to Buy & Sell by aln00000 - 1 day, 23 hrs ago
n770 youtube video (0)
to General by nmdv - 5 days, 22 hrs ago
more...

Page 66 of 81

Thread Tools

szopin	2014-03-23 , 21:22
Posts: 2,076 \| Thanked: 3,268 times \| Joined on Feb 2011	#651

srsly wtf, everything was working cool and dandy, then red-led-blinking reboot and since then cannot get my hwkb to work reliably, sometimes it works for 5 minutes, sometimes for an hour, don't think we can get this working reliably until jolla fixes their part (btw if anyone managed to remove their hwkb oh pls share the tactic, screwdriver where to not damage it? it is stuck hard for me and need to use windows-like trick abandon battery for 10 minutes and reboot...) that was fifth red-led reboot since non-beta, srs wtf

	kimmoli	2014-03-23 , 21:32
	Posts: 562 \| Thanked: 2,744 times \| Joined on Dec 2013 @ Espoo, Finland	#652

Originally Posted by szopin

srsly wtf, everything was working cool and dandy, then red-led-blinking reboot ...

I'm investigating this issue atm. I have had also few spontaneous reboots today. (no hwkbd connected, just running the daemon)

Originally Posted by szopin

remove their hwkb oh pls share the tactic

I had trouble inserting it to the phone in first place, so i 'shaved' off dimples from other edge. It is tight enough to stay there, but i can get it in and out.

Attached Images

__________________
TOH ideas, concepts and creations since 2013 toholed tohuart toheink Heebo tohIRi i2ctool tohmm LeTOH FMTOH

The Following User Says Thank You to kimmoli For This Useful Post:
szopin

szopin	2014-03-23 , 21:41
Posts: 2,076 \| Thanked: 3,268 times \| Joined on Feb 2011	#653

Originally Posted by kimmoli

I'm investigating this issue atm. I have had also few spontaneous reboots today. (no hwkbd connected, just running the daemon)

I had trouble inserting it to the phone in first place, so i 'shaved' off dimples from other edge. It is tight enough to stay there, but i can get it in and out.

Thanks kimmo, seriously doubt it is the kb daemon though. The two weeks as main device on last beta had one green and one red reboot, after non-beta 1 green and 4 red before plugging the oh, one after, on average it seems 1.0.4.20 is thw culprit, at first thought it was me using unsupposrted features (4g), but the last one happened on 3g... They just should move to bimonthly release if qualcomm is causing troubles (not even gonna mention other buhs/problems introduced by the supposedly stable release)

	kimmoli	2014-03-23 , 21:51
	Posts: 562 \| Thanked: 2,744 times \| Joined on Dec 2013 @ Espoo, Finland	#654

0.28 release note

RPM Installer, bin-only spec file
Binary 0.28 update
dbus config file remove. Relocate binary to /usr/sbin
Sessionbus connection remove
Binary 0.27 update
Fix for PageUp/PageDown
Update tca8424.cpp, Right control as backslash/pipe/ESC

__________________
TOH ideas, concepts and creations since 2013 toholed tohuart toheink Heebo tohIRi i2ctool tohmm LeTOH FMTOH

The Following 6 Users Say Thank You to kimmoli For This Useful Post:
Bundyo, ggabriel, hnhanu, Kabouik, meShell, OVK

Kabouik	2014-03-23 , 22:53
Posts: 1,335 \| Thanked: 3,931 times \| Joined on Jul 2010 @ Brittany, France	#655

I was away for the past week, just came back and found the HWKB OH in my mailbox. Unfortunately, it doesn't fit. I have tried starting from all sides, gently or with some hard pressure, it will not fit my Jolla. I will try "shaving" some areas of the OH but I admit I am afraid about doing it wrong. :<

[Edit] Got it fitted after shaving a lot of areas of the OH, but it still attaches solidly to the Jolla (I have to use a credit card to remove it).

All keys but R seem to work, I have to press it in a very awkward manner for it to register, and even like that, it only works once every 20-30 attempts (same with "3" for Alt + R). Shift only works when locked with a double pressure but I think this is normal with current software version. Most special characters work, but will show a "?" before, like "?#" when I press Alt + D for "#". I was prepared to such kind of issues with a prototype, no worries, and the software will continue improving. Just sad the R key doesn't work.

Is your OH completely flat when closed? On mine, the top side (where the camera hole is) of the keyboard part is 2 mm away from the main part, while the bottom side firmly touch the main part. I tried to correct it but couldn't.

Last edited by Kabouik; 2014-03-25 at 13:27.

dirkvl	2014-03-24 , 17:36
Posts: 1,104 \| Thanked: 5,652 times \| Joined on Feb 2010 @ Holland	#656

Okay, I can start assembling the next 30 in a couple of days. Hope i can send them out early next week.

They will go to:
Jouni, Jesse, Teemu, Harri (2x), Tuomo, Martin, Florian, Michael, Kamen, Heikki, Tomas, Soesman (2x), Michalko, Teppo, Walter, Peter, John, Joachim, Pawel, Auvo, Matthias, Jean, Mikko, Ilpo, Lehtonen, Matti, Kristian and Aleksi. (payments received between 29 jan and 13 feb)

The Following 3 Users Say Thank You to dirkvl For This Useful Post:
Bundyo, OVK, ZoniBG

	HtheB	2014-03-24 , 17:44
	Moderator \| Posts: 3,718 \| Thanked: 7,419 times \| Joined on Dec 2009 @ Bize Her Yer Trabzon	#657

Originally Posted by dirkvl

Okay, I can start assembling the next 30 in a couple of days. Hope i can send them out early next week.

They will go to:
Jouni, Jesse, Teemu, Harri (2x), Tuomo, Martin, Florian, Michael, Kamen, Heikki, Tomas, Soesman (2x), Michalko, Teppo, Walter, Peter, John, Joachim, Pawel, Auvo, Matthias, Jean, Mikko, Ilpo, Lehtonen, Matti, Kristian and Aleksi. (payments received between 29 jan and 13 feb)

Maybe it's a good idea to fully test them first before sending them (does it fit? does all the keys work properly etc.)

__________________
www.HtheB.com
Please donate if you think I'm doing a good job.

dirkvl	2014-03-24 , 18:58
Posts: 1,104 \| Thanked: 5,652 times \| Joined on Feb 2010 @ Holland	#658

Originally Posted by HtheB

Maybe it's a good idea to fully test them first before sending them (does it fit? does all the keys work properly etc.)

yes, will do!

The Following User Says Thank You to dirkvl For This Useful Post:
OVK

toki	2014-03-25 , 03:00
Posts: 188 \| Thanked: 74 times \| Joined on May 2010	#659

Originally Posted by dirkvl

Okay, I can start assembling the next 30 in a couple of days. Hope i can send them out early next week.

They will go to:
Jouni, Jesse, Teemu, Harri (2x), Tuomo, Martin, Florian, Michael, Kamen, Heikki, Tomas, Soesman (2x), Michalko, Teppo, Walter, Peter, John, Joachim, Pawel, Auvo, Matthias, Jean, Mikko, Ilpo, Lehtonen, Matti, Kristian and Aleksi. (payments received between 29 jan and 13 feb)

didnt see my name there.. aww dang. guess mine will be next batch hehehe =]

(well.. i did only preorder in march ahaha)

seriously great job guys!! we cant thank you guys enough for all the hard work being put in!!

stefanmohl	2014-03-26 , 13:54
Posts: 172 \| Thanked: 170 times \| Joined on Jan 2010 @ Sweden	#660

Originally Posted by dirkvl

yes, will do!

Perhaps you could write down and add to the public repository what problems you discover and how you solve them? These kinds of pragmatics can be very valuable for someone trying to build a qwerty-oh for themselves... There are no make- or configure-scripts for building hardware :-)