Page 32 of 37 « First 223031 32 3334 Last »
Reply
Thread Tools
taixzo is offline taixzo
2020-08-31 , 06:49
Posts: 959 | Thanked: 3,427 times | Joined on Apr 2012
#311
I'm going to do some more testing tomorrow! Unfortunately I cannot test my Xperia X because the camera no longer works, but I can test a Nexus 5 and my original Jolla 1.
IR affecting the focus was my guess. Although the view in the camera doesn't seem to do the focusing back and forth that it does when trying to focus in the dark.
I know that dedicated cameras are not affected; I can take pictures of it fine with a GoPro, a GoPro knockoff, and a Casio Exilim.
__________________
Saera: A Siri clone for the N900, N9(50) and Jolla

Follow me on Twitter: twitter.com/taixzo
 

The Following 3 Users Say Thank You to taixzo For This Useful Post:
taixzo is offline taixzo
2020-09-01 , 03:43
Posts: 959 | Thanked: 3,427 times | Joined on Apr 2012
#312
So I did a bit more testing today. The other cameras are fine taking photos. I discovered that if I block the second lens on the Pro1, it seems to work.

Also, after rebooting it seems to work without doing that most of the time. Strange.
__________________
Saera: A Siri clone for the N900, N9(50) and Jolla

Follow me on Twitter: twitter.com/taixzo
 

The Following 2 Users Say Thank You to taixzo For This Useful Post:
taixzo is offline taixzo
2020-09-04 , 05:07
Posts: 959 | Thanked: 3,427 times | Joined on Apr 2012
#313
New problem that came up today: my phone has stopped resolving DNS. I can't find anywhere in the wifi settings to configure it and am not familiar enough with SFOS to do it from command line (editing /etc/resolv.conf doesn't seem to do anything).

If I try to ping a domain, it seems to find an ipv6 address but fail to connect to it:
Code:
# ping google.com
PING google.com (2607:f8b0:4006:808::200e): 56 data bytes
^C
--- google.com ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
Same result for ping6. I can ping ipv4 addresses directly though:

Code:
# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=117 time=17.478 ms
...
I cannot ping6 any ipv6 addresses.

This behavior is the same both on wifi and on cellular network.
__________________
Saera: A Siri clone for the N900, N9(50) and Jolla

Follow me on Twitter: twitter.com/taixzo
 

The Following 2 Users Say Thank You to taixzo For This Useful Post:
taixzo is offline taixzo
2020-09-11 , 17:47
Posts: 959 | Thanked: 3,427 times | Joined on Apr 2012
#314
My experience ever since: networking is extremely unreliable on the Pro1. Sometimes nothing loads, sometimes things do load but very slowly, sometimes everything works fine. I cannot ping any website but I can usually curl them. I cannot listen to podcasts anymore via podqast, as the downloads never complete. I also cannot use online routing in any mapping app. However I can usually load webpages in the browser and load posts in quickddit.
I've tested on my home network, on public wifi hotspots and on 4G. Same thing. The device is basically unusable.
__________________
Saera: A Siri clone for the N900, N9(50) and Jolla

Follow me on Twitter: twitter.com/taixzo
 

The Following 2 Users Say Thank You to taixzo For This Useful Post:
Zeta is offline Zeta
2020-11-08 , 15:44
Posts: 339 | Thanked: 1,623 times | Joined on Oct 2013 @ France
#315
That will sound like a noob question, but that is the first sailfish device I have that is a community port, so...

The pro1 doesn't show me the update for the OS (3.3.0.16 currently). My original Jolla updated to 3.4.0.24.
I particularly like the update to the default web browser, that allows some sites that were broken to work again (an FM radio web player in my case), and crashes a lot less.

Is it already available through zypper/ssu/version --dup, or is something needed from the porter to make it available ?

If available, did someone try it and can report if there are some issues with the Pro1 that would justify waiting a bit before updating ?

Thanks !
 

The Following 3 Users Say Thank You to Zeta For This Useful Post:
juiceme is offline juiceme
2020-11-09 , 09:26
Community Council | Posts: 4,920 | Thanked: 12,867 times | Joined on May 2012 @ Southerrn Finland
#316
Originally Posted by taixzo View Post
My experience ever since: networking is extremely unreliable on the Pro1. Sometimes nothing loads, sometimes things do load but very slowly, sometimes everything works fine. I cannot ping any website but I can usually curl them. I cannot listen to podcasts anymore via podqast, as the downloads never complete. I also cannot use online routing in any mapping app. However I can usually load webpages in the browser and load posts in quickddit.
I've tested on my home network, on public wifi hotspots and on 4G. Same thing. The device is basically unusable.
If networking "in general" seems to work but things are behaving erratically or slowly it usually indicates some problems in DNS resolving.
Have you tried to set up a different name service to see if it makes any difference?
__________________
Dave999: Meateo balloons. What’s so special with em? Is it a ballon?
 

The Following 4 Users Say Thank You to juiceme For This Useful Post:
epninety's Avatar
epninety is offline epninety
2020-11-09 , 16:09
Posts: 269 | Thanked: 1,096 times | Joined on Sep 2009 @ Hampshire, UK
#317
Originally Posted by Zeta View Post
Is it already available through zypper/ssu/version --dup, or is something needed from the porter to make it available ?
In a bored moment, I tried to upgrade using the sfos-upgrade script, and it broke in an interesting way. About 30 seconds after boot, the screen blanks and stays that way. I haven't investigated further, but I'd suggest you don't try it unless it's confirmed working.

Maybe look up the telegram group if you want the latest info?
 

The Following 5 Users Say Thank You to epninety For This Useful Post:
peterleinchen's Avatar
peterleinchen is offline peterleinchen
2020-11-09 , 17:19
Posts: 4,118 | Thanked: 8,901 times | Joined on Aug 2010 @ Ruhrgebiet, Germany
#318
Originally Posted by epninety View Post
About 30 seconds after boot, the screen blanks and stays that way.
You mean like
https://forum.sailfishos.org/t/the-s...-thats-it/2282
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!

Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257

editsignature, http://talk.maemo.org/profile.php?do=editsignature
 

The Following 3 Users Say Thank You to peterleinchen For This Useful Post:
epninety's Avatar
epninety is offline epninety
2020-11-09 , 17:43
Posts: 269 | Thanked: 1,096 times | Joined on Sep 2009 @ Hampshire, UK
#319
Originally Posted by peterleinchen View Post
You mean like
https://forum.sailfishos.org/t/the-s...-thats-it/2282
Sounds very like it. I don't have phonehook installed though. Patchmanager and Battery Overlay might be candidates though.

Maybe in a few months I will raise the enthusiasm to try and fix it, but I doubt it.
 

The Following 3 Users Say Thank You to epninety For This Useful Post:
mosen's Avatar
mosen is offline mosen
2020-11-09 , 18:55
Community Council | Posts: 1,669 | Thanked: 10,225 times | Joined on Nov 2014 @ Lower Rhine
#320
Asked on Telegram wether it is safe to upgrade Pro¹.
It is not!
Afaiu something in obs is broken and furthermore the lvm encryption will make a reflash necessary.

Management Summary: Wait for porters command.
(Or know what you are doing and sport 3.4 like all the porters do already :P)
__________________
Watch our weird watchfaces for mighty AsteroidOS
Performance comparison Video Sailfish 2.0 vs 1.1.9 vs 1.1.7
[MC eV] Maemo Community eV membership application please concider to join!
 

The Following 6 Users Say Thank You to mosen For This Useful Post:
Reply
Page 32 of 37 « First 223031 32 3334 Last »

Tags
fxtec pro1, sailfish os

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 17:40.

Contact Us - Home - Archive - Top